7.509 bytes

Product Information

Document ID: MIGR-487RG5

10.1GB 7200rpm EIDE Hard Drive - Product Overview

Applicable to: World-Wide

General Information
This Hard Drive extends IBM's line of peak performing, second generation, 7200 rpm EIDE hard drives for PCs and IntelliStations. This drive:

Features include:

Warranty: 3 year limited Customer Carry-In Exchange

This product replaces:

This product was replaced by:
Not Applicable.

One box containing...

Marketing and FRU Part Numbers
World Wide...

Additional Part Numbers
Part number(s) for ordering multiple quantities:

Product Dates
World Wide...

Technical Specifications
Performance Specifications as known at time of announcement:
Average latency (average rotational delay): 4.2 ms

Burst transfer rate (max): 66 MB/sec

Formatted capacity: 10100 MB

Rotational speed: 7200 rpm

Sustained data transfer rate: 10 to 17 MB/sec

Interface performance: Ultra ATA/66

Typical average read seek time: 9ms

Data buffer (adaptive segmented): 512 KB (Up to 132 KB reserved for drive firmware)


  1. Actual performance varies based on many factors and is often less than the maximum possible.
  2. When referring to hard disk drive capacity MB = 1 million bytes; GB = 1000 million bytes. Actual capacities vary based on different operating environments.
  3. The total user-accessible capacity can vary slightly based on operating system environments.

Physical, Environmental, and Compatibility Specifications as known at time of announcement:
Weight: * lbs (.59 kg)
Height: * inches (2.59 cm)
Width: * inches (10.2 cm)
Depth: * inches (14.67 cm)

Operating Temperature:

Relative Humidity:

Agency Approvals:
CE Mark

ENERGY STAR-Compliant: No. The ENERGY STAR emblem does not represent EPA endorsement of any product or service.

Hardware Requirements for IBM systems:
The hard drive is supported on all models of the following IBM platforms:

Hardware Requirements for Non-IBM systems:
No information available

Supported Operating Systems:
The drive is supported in the following environments:

Compatibility: The drive adheres to the ATA/ATAPI-4 (X3T13/D1153 Revision 17) American National Standards Institute (ANSI) standard.

Document Note(s):

  1. The symbol * is used to denote that the information is currently unavailable for this product.
  2. All dates are represented in the US English format of mm/dd/yyyy (where mm=month, dd=day, yyyy=year).
  3. FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
  4. Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product can not be obtained directly from IBM.

Search Keywords

Document Category

Date Created


Last Updated


Revision Date



IBM Options

Product Family

Hard Drives

Machine Type




Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes