12.061 bytes

Service Hints & Tips

Document ID: MIGR-47EDWJ

TP 560Z - Installing Windows 2000 Beta 3 onto a blank hard drive

Applicable to: World-Wide

IBM Personal Systems Group Support for Microsoft Windows 2000 Beta

IBM is providing a selection of drivers and information to assist our customers who are evaluating the Microsoft Windows 2000 family of products during the beta test phase. It is hoped that these materials will be helpful to you. However, please understand that, beta-level code and information by their nature are prototype materials and that IBM is not in a position to assure their quality, function, performance or compatibility. Therefore, IBM does not provide technical support for these items. IBM also is not obligated to provide any maintenance or updates for the items. IBM provides the drivers and any related information or services "AS IS", without warranties of any kind, express or implied, including THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NO APPLY TO YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION AND SCOPE TO THE GREATEST EXTENT ALLOWED BY LAW. IBM's warranties, if any, for newly purchased IBM hardware products are as stated in the applicable IBM Statement of Limited Warranties, and for IBM licensed programs are as stated in the applicable IBM Program License Agreement.

IN NO EVENT WILL IBM BE LIABLE FOR ANY LOSS OF OR DAMAGE TO YOUR DATA, LOST PROFITS, LOST SAVINGS, THIRD PARTY DAMAGES, INCIDENTAL DAMAGES OR OTHER ECONOMIC CONSEQUENTIAL DAMAGES, EVEN IF IBM HAS BEEN ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES.

ThinkPad 560Z Windows 2000 Beta 3 blank hard drive install instructions

To perform this procedure you will require the following drivers:

TP 560Z BIOS	Click here
TP 560Z Utility Features for Windows 2000 Beta 3	Click here
TP 560Z TrackPoint drivers for Windows 2000 Beta 3	Click here

When the install of utilities or Windows 2000 components request the restart, always cold boot the machine, The lack of video on warm boots is currently under investigation.

1. Flash the ThinkPad BIOS to the most current level available on the IBM Support Web page.
2. Boot the ThinkPad with a bootable diskette which contains the appropriate DOS based CD-ROM drivers. This will be PCMCIA CD based or Parallel Port based. Any method of copying the i386 subdirectory on the Beta 3 CD onto the hard drive of the ThinkPad will be acceptable since the 560 class of machines do not natively have CD drives.
3. Or, insert the Windows 2000 Beta 3 CD and boot from the CD. These instructions are written from the perspective of step #2, with the Windows 2000 source code on the hard drive.
4. Create and format a 2 Gig FAT 16 partition, can be done ahead of time or via the bootable floppy disk.
5. The addition of a DOS SMARTDRV utility will speed up the file copy process greatly.
6. Run WINNT from the i386 subdirectory.
7. Press Enter to continue if WinNT finds it's own subdirectory
8. Please wait until all the files are copied to the hard drive.
9. After the file copy process has ended, press Enter to reboot the machine after removing the floppy disk.
10. Press Enter to confirm the Beta Version Installation.
11. Press Enter to continue the setup process
12. Press F8 to accept the End User License Agreement (EULA)
13. The NT Fdisk screen appears. Make sure that C: FAT is highlighted and press Enter to continue the setup process.
14. Next select the File System to be installed. The FAT file system installation is preferred since the drive can be converted at a later date. Press Enter to accept the current file system.
15. Setup will examine the disks (run scandisk) and start the file copy process to the appropriate Windows 2000 installation subdirectories.
16. Setup will reboot the machine.
17. The Windows 2000 GUI loads after boot.ini loads. The Windows 2000 setup wizard launches.
18. The boot process will launch quicker if the floppy drive is left attached to the machine.
19. Click Next to continue the setup process.
20. The Installing Devices screen appears.
21. The hardware devices will be installed at this step; this step will take several minutes.
22. Click Next at Regional settings if you want the US keyboard, or change as required. These install instructions were written with US keyboard selected.
23. Enter your Name and Organization, and click Next.
24. Enter the computer name and Administrator password, click Next to continue.
25. Adjust time and date if required then click Next to continue.
26. The windows networking components are installed.
27. Installing more components, more file copy.
28. Setup is completing its final set of tasks, the start menu items, registry components, savings the configuration settings and deletes any temporary files.
29. Click Finish when the competing Windows 2000 setup wizard appears.
30. The system will shutdown and reboot. Cold Boot will be required.
31. Close the Getting Started with Windows 2000 dialog box upon reboot.
32. Close ThinkPad Modem Reminder
33. Click Next at New Hardware Found Wizard.
34. Check to make sure that Search button is checked and click Next at Install Hardware Devices.
35. Remove check mark by floppy disk and click Next to continue.
36. Click Finish at Driver File search dialog box.

ThinkPad Configuration Installation

1. Insert the ThinkPad utility diskette 1 into the floppy drive and click Start, Run.
2. Type A:\SETUP on the Run command line, and press Enter
3. Click Next at the Welcome screen.
4. Click Next to accept the default subdirectory for the ThinkPad utilities.
5. Click Custom install method and click Next to continue.
6. Remove the check mark by Personalization Editor and click Next.
7. Click Next to accept the default ThinkPad group.
8. ThinkPad utility file copy process begins.
9. Remove and insert the required diskettes as prompted. The diskette insertion prompt will ask for the Win98 diskettes, use the Windows 2000 diskettes.
10. The utility data diskette is machine specific, please use the correct one.
11. ThinkPad utility install will complete and ask to restart the machine, select No, I will restart later. Then click Finish, and then remove the data diskette.
12. Close ThinkPad configuration, shutdown and restart the machine.

ThinkPad TrackPoint 4 mouse driver installation

1. Extract the drivers to the hard drive. The default directory the files are extracted to is C:\DRIVERS\WIN\TPOINT.
2. Open Mouse icon in Control Panel
3. Select Hardware tab and click Properties.
4. Click Driver tab and click Update driver, the upgrade device wizard will start, click Next to continue.
5. Ensure that search for suitable driver is selected and click Next to continue.
6. Remove all check marks shown and ensure that only Specify a location is checked and click Next to continue.
7. Type C:\DRIVERS\WIN\TPOINT in the dialog box and click Next to install the resultant driver MSMOUSE.INF.
8. Click Yes to accept the IBM PS/2 TrackPoint driver.
9. Mouse driver file copy occurs, click Finish to end install.
10. Click No to restart computer now.
11. Close all open windows and shutdown Windows 2000 and restart.
12. Open Mouse icon in Control Panel and select the TrackPoint tab to customize the TrackPoint mouse features.

	Search Keywords
	Document Category	Windows 2000 Beta
	Date Created	29-04-99
	Last Updated	11-05-99
	Revision Date	12-05-2000
	Brand	IBM ThinkPad
	Product Family	ThinkPad 560Z
	Machine Type	All
	Model	All
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes