Sonic PX Engine update
for Microsoft Windows NT 4.0, 2000, and XP
version 2.072b
Installation README


This package installs an updated version of the Sonic PX Engine
software that comes with IBM Rescue and Recovery, IBM Rapid
Restore PC, and IBM Image Ultra. This update requires
approximately 2MB of space on your hard disk (drive C).

This package corrects the following problems:

- Creating Rescue Media from Access IBM fails with the error
  "There was a problem recording data to the disc. The disc 
  could be defective. Make sure there is a blank disc in
  the recorder and press OK to retry or Cancel to abort."

- Creating an initial backup CD set using Rapid Restore Ultra
  fails with the error "There was a problem recording data to
  the disc. The disc could be defective. Make sure there is a
  blank disc in the recorder and press OK to retry or Cancel
  to abort."

- Creating a CD set using Image Ultra may fail with the error
  "There was a problem recording data to the disc. The disc 
  could be defective. Make sure there is a blank disc in the
  recorder and press OK to retry or Cancel to abort."

- Creating a Jukebox CD using IBM RecordNow may fail with a
  "buffer underrun" error as a side effect of installing IBM
  Rapid Restore Ultra.

- Creating a copy of the Rescue Media CD would result in an
  unusable copy with no other errors.

Print this file so that you can refer to it during the installation.


Downloading the update
----------------------
1.  Click the file link to download the file from the Web page.
2.  When prompted, select a drive and directory in which to save
    the downloaded file.


Installing the update
---------------------
1.  Click Start, click Find or Search, then click Files and folders.
2.  Type b91z84usa.exe in the search field, then click Search.
    This will locate the file you just downloaded.
3.  Double-click the icon for b91z84usa.exe.
4.  Click Next. Read the license agreement.
5.  Click I accept the terms in the license agreement.
6.  Click Next.
7.  Ensure that "Save files in folder" is set to
    C:\IBMTOOLS\DRIVERS\B91Z84US.
8.  Click Next.
9.  Click Finish.
10. Click Start, then click Run.
11. Type C:\IBMTOOLS\DRIVERS\B91Z84US\setup.exe, then click OK.
    The setup program will run. Follow all onscreen prompts to
    complete the installation.


Trademarks
----------
IBM, NetVista, and ThinkCentre are trademarks of the IBM
Corporation in the United States, other countries, or both.

Microsoft and Windows are trademarks of Microsoft Corporation in
the United States, other countries, or both.

Other company, product, and service names may be trademarks or
service marks of others.

THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.
IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE
INFORMATION IN THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.

(C) Copyright IBM Corporation 2005.  All rights reserved.