Flash BIOS update - CD-ROM ISO image version for ThinkCentre(R) 8122, 8123, 8124, 8129, 8131, 8132, 8133, 8134, 8135, 8136, 8137, 8138, 9212, 9213 Version 2FKT23A Installation README This package updates the basic input/output system (BIOS) on ThinkCentre 8122, 8123, 8124, 8129, 8131, 8132, 8133, 8134, 8135, 8136, 8137, 8138, 9212, and 9213 systems. BIOS is programming that controls low-level hardware operations, including interactions with diskette drives, hard drives, and the keyboard. The BIOS is stored on a chip. Your computer uses flash BIOS, which can be updated through a program on a flash diskette so that you do not have to replace the BIOS chip to update the BIOS. Note: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS. Print this file so that you can refer to it during the installation. Important Note -------------- Installing this update involves creating a BIOS flash CD and running the flash program from the CD. You must have access to a CD-R or CD-RW drive and CD-R software which is capable of creating a CD from an ISO image. Downloading the update ---------------------- 1. Click the file link to download the file from the Web page. 2. When prompted, select a drive and directory in which to save the downloaded file. Create the bootable CD ---------------------- Create a CD from the CD ISO file, 2fj923a.iso. Use your CD-R software's feature for creating a CD from an ISO image; RecordNow! calls this feature "Burn Image". Refer to the help provided with your CD-R software for further assistance. Installing the update --------------------- 1. Close all open applications. 2. Insert the bootable CD into your CD-ROM drive. 3. Shutdown the computer. 4. With the CD still inserted in the CD-ROM drive, power on the system. 5. When you are prompted to select a country, press the number on your keyboard which corresponds to the country in which you are using the computer. For example, press 1 for the United States. 6. Press Enter. You will be asked if you wish to update the serial number of your machine. 7. Press N. You will be asked if you wish to update the machine type/model number of your machine. 8. Press N. The Phoenix Phlash16 utility will appear onscreen. 9. Wait until you see a message stating that the update has completed successfully. 10. Remove the CD from the CD-ROM drive. 11. Press Enter. Note: If your system boots back to a 1962 POST error or displays a picture of a diskette on the screen, enter the Setup utility by pressing F1 during startup and change the Startup options to include your hard drive. Summary of changes ------------------ General Information: 2FJTxxA is the flash diskette level. 2FKTxxA is the binary image level. (BIOS) NOTE: All changes carry forward. That is, if a change is added in 01, it is also in 02, 03 etc. Changes for 2FKTxxA/2FJTxxA: 2FKT23A/2FJT23A - Fixes a problem where the power LED turns off when the onboard ethernet is disabled - Fixes a problem where a 1762 POST error occurs when a USB key is added or removed and the Administrator Password is present - 8603 POST errors are now logged in the DMI error log as bit 30 2FKT22A/2FJT22A - Ensures that POST 1806 errors are logged in SMBIOS - Fixes a CD-ROM enumeration problem - Removes incorrect text from Setup 2FKT21A/2FJT21A - Fixes potential CMOS checksum 0162 errors - Fixes intermittent 0197 POST errors - Fixes a problem where the system may potentially hang during S3 resume - Fixes a problem where an nVidia Quadro4 video card does not work in PCI slot 2 2FKT20A/2FJT20A - Fixes invalid programming of Broadcom LAN BAR - Adds processor microcode for the 0F49 processor 2FKT19A/2FJT19A - Fixes an S3 resume problem with nVidia NV6200 PEG video adapter - Fixes a problem where there is a loss of video after S3 with Windows 2000 and a GeForce 6600 video adapter - Adds code to ensure that the system turns off after boot block recovery - Adds code to ensure that Wake On LAN boots take the "automatic" boot path - Fixes the hard drive (HDD) timeout switch in BIOS Setup 2FKT18A/2FJT18A - Fixes a problem where the system hangs when resuming from S3 standby when the boot drive is connected to SATA connector 3 or 4 - Fixes a problem where NX BIOS setup options were backwards (enable actually disabled the function) - Fixes a problem where the COM2 port address is not set in the BDA - Updated the Lenovo splash screen 2FKT17A/2FJT17A - Fixes a problem where the video screen is blank when using the ADD2-R adapter 2FKT16A/2FJT16A - Fixes a problem where the system does not turn off after boot block recovery - Hides Ethernet when disabled in Setup - Adds code to issue hard drive "freeze lock" command to all drives on return from S3 power state - Fixes a problem where Transfer mode becomes PIO after disabling parallel ATA - Updates video BIOS to address ADD-2 card problem with monitor detection 2FKT15A/2FJT15A - Issues hard drive Freeze Lock command to all drives on S3 return - Fixes a problem where the system hangs after a boot block recovery when custom defaults are set. This problem was injected in 2FKT14A. - Winphlash.exe now accepts 12 character passwords 2FKT14A/2FJT14A - Increases the number of parameters accepted by flash2.exe - Adds cfgedt2F.exe to the 2FJ514A.EXE - Ensures Loading Custom Defaults settings remain after the system is rebooted - Adds 12 character password support to the BIOS WinPhlash interface. Still waiting for the update of Winphlash.exe program to support 12 character passwords. - Fixes a Setup typo in the Automatic Power On help text - Fixes SMBIOS structures - Wake on LAN now follows the Automatic Startup Sequence - Fixes an intermittant problem detecting the hard drives when they are connected to connectors SATA2 or SATA3 - Fixes a problem that causes the SATA transfer mode becoming PIO after the PATA drives were disabled - Warning is now displayed during POST if a high power processor is used in the system - Improves the rear USB port signal quality - Adds Lenovo copyright statement 2FKT13A/2FJT13A - Fixes a problem that prevents some video device drivers from loading - Fixes a problem where the flash diskette hangs before the BIOS update starts 2FKT12A/2FJT12A - Fixes a problem displaying the MAC address in the Setup screen - Improves USB port signal quality 2FKT11A/2FJT11A - Initial Production Release Trademarks ---------- IBM, NetVista, and Options By IBM are registered trademarks of International Business Machines Corporation. ThinkPad, ThinkCentre and Think Accessories are registered trademarks of Lenovo. Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. WE DISCLAIM ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, WE GRANT NO LICENSES TO ANY PATENTS OR COPYRIGHTS. Copyright (c) 2005 IBM Corporation Copyright (c) Lenovo 2005, all rights reserved