H166163: S3 VIDEO DRIVER MAY NOT LOAD WITH SOME COMM ADAPT SYMPTOM: If you install the IBM S3 video driver and restart the system Windows NT will revert back to standard VGA mode, if a IBM SDLC, 3270 and 5250 PCI adapter is installed. PROBLEM ISOLATION AIDS: - The system is any of the following IBM servers: a Netfinity 7000-M10 server, Type 8680, any Model. a Netfinity 7000 server, Type 8651, any Model. a Netfinity 5500-M20 server, Type 8662, any Model. a Netfinity 5500-M10 server, Type 8661, any Model. a Netfinity 5500 server, Type 8660, any Model. a Netfinity 5000 server, Type 8659, any Model. - The system is configured with one of the following: Windows NT server 4.0 Windows NT Terminal server 4.0 (Note: These are affected with or without any service pack applied.) - The S3 Video Device Driver for the On-board Video Adapter is affected. FIX: - This behavior is fixed in version 3.24.16 of the video driver. - The target date for the release is scheduled for: April 1999. - It will be available from the following URL: http://www.pc.ibm.com/searchfiles.html search on 'S3 video' WORKAROUND: Use the standard VGA driver that ships with Windows NT or Windows Terminal Server. TRADEMARKS: Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States and/or other countries. Other company, product and service names may be the trademarks or service marks of others. DATE: March 29, 1999