H136769: 2640 560 LCD COMPONENT FRU LIST & INSTRUCTIONS. TEXT: The new HMM S84H-8101-00 for the 365X, 365XD, and 560 ThinkPad contains the following FRU part numbers and LCD FRU component removal and replacement instructions. The following FRUS have been released for the 560 LCD components. ____________________________________ | |LCD | | |DSTN COMPONENT FRUs| FRU PART NUMBER | |-------------------+-----------------| | DSTN Assembly | P/N46H4139 | | LCD Bezel | P/N46H4154 | | Control Knob | P/N46H4158 | | LCD Panel | Order Assembly | | Inverter Spacer | P/N46H4159 | | Inverter Card | P/N46H4152 | | Shield Sheet | P/N46H4157 | | LCD Cable | P/N46H4156 | | Hinges | P/N46H4155 | | Rear Cover | P/N20H4263 | New, update manual |-------------------+-----------------| |TFT COMPONENT FRUs | FRU PART NUMBER | |-------------------+-----------------| | TFT Assembly | P/N46H4140 | | LCD Bezel | P/N46H4162 | | Control Knob | P/N46H4224 | | LCD Panel | Order Assembly | | Shield Sheet | P/N46H4165 | | LCD Cable | P/N46H4164 | | Hinges | P/N46H4163 | | Rear Cover | P/N20H4264 | New, update manual |-------------------+-----------------| | COMMON PARTS | FRU PART NUMBER | |-------------------+-----------------| | Screw Cover | P/N66G5046 | | Screw 2.5x6mm | P/N46H4160 | New, update manual |_____________________________________| ================================================================ LCD front Cover: DSTN and TFT Removal. ___________________________________________ | | | ______________________________ | | | | ( ) |<-Small Logo | | Remove Screws and pull | | | | Bezel down to dis- | | | | assemble. | | | | | | | | | _ | | | | | ||<--Control | | | | || Knob | | | | ||NOTE: | | | | ||1 TFT Knob | | | |_||2 DSTN Knobs | |______________________________| | | | |___________________________________________| screw--->|__o____| screw-->|__o_________o ___|<-------screw ================================================================ DSTN Panel, Inverter Card, LCD Cable, and Hinge Locations. ___________________________________________ | | | ______________________________ _____ | screw---->o |____ |<--LCD to | | screw------>o || |Inverter | | | __ |Cable ** | | |_ | | | | | |_|| |<--Inverter | | DSTN | | | |Card LCD----->|| | | | | Cable | | | | | | | | | | |_ | | | | |_ o<--inverter | | LCD Cable Clamp | |_| |screw & | | | screw------>o |spacer screw---->o|_______|______________________||------o|<-Hinge and |________o-----o____________________|_______| Screw Hinge---->|_o_o___| | |__o_________o_o__|<--------| LCD Cable-------->| | Note ** Ensure the LCD Inverter Cable is aligned correctly to the Inverter Card socket. __________________________________ | |cable| | | _|_____|__ | | Example _| |_ | | -----|__________|----- | | | | | | | card | | | | |_________________________________| ================================================================ TFT Panel, Cable and Hinge Locations ___________________________________________ | | | ______________________________ | screw---->o |__ | | | screw------>o |<-----Inverter card | | | | |is part of | | | | |TFT Assembly. | | | |__ | | | TFT | |__ <---LCD Cable | | | | | | | | |__ | | | | |__ <---LCD Cable | | |__| | | | screw------>o | screw---->o______________________________| | | o----o--LCD Cable Clamp |-----o|<--Hinge & |__________| |______________________|______| Screw |__o_o__| | |__o__________o_o_|<---Hinge NOTE: There are two types of rear covers for the ThinkPad 560 TFT LCD unit. Make sure which type you have before installing the replacement LCD panel. 1. If the rear cover has two alignment bosses ensure they are inserted into the LCD indentations. If this is not done the panel could crack. 2. If the cover has no alignment bosses snug the LCD panel screws and completely reassemble the system. Loosely place the Front Bezel on the panel and power on the system. The inactive area on a full white or color screen should measure 0.4mm as the following figure shows. When the space between the bezel and active area is within specifications tighten the panel screws and complete the installation of the Bezel and screw covers. ___________________________________________ | Front Bezel | | ______________________________ | Inactive area-----.4mm----------------------------- | ( ) | | | | | | | | | -Measure Here ------ | | | | Between the solid line of the| | | | Bezel and the dashed line of | | | | the active area. | _ | | | | | || | | ACTIVE AREA | | || | | | | || | | | | || | | | |_|| | |______________________________| | | | |___________________________________________|