H133509 - ADAPTER RESOURCE CONFLICT ON FIRST WINDOWS95 IPL                   
                                                                                
                                                                                
                                                                                
 SYMPTOM                                                                        
 IBM PC 340 Series 6560 systems preloaded with Microsoft                        
 Windows95 may exhibit an adapter installation failure during                   
 the initial power on of the system with a LAN Adapter                          
 installed.                                                                     
                                                                                
 The Windows95 Control Panel will indicate that the LAN adapter                 
 is either not present, not working, or not properly installed                  
 by displaying a yellow exclamation mark or a red X next to the                 
 LAN adapter entry in the Control Panel Device Manager.                         
                                                                                
 PROBLEM ISOLATION AIDS:                                                        
 This failure ONLY affects 6560 systems on the very FIRST power-                
 on cycle with the LAN adapter ALREADY installed.                               
                                                                                
 Systems that have been previously powered on to IPL Windows95                  
 and powered off will not exhibit this failure when the LAN                     
 adapter is installed.  The failure ONLY occurs when the LAN                    
 adapter is present during the first IPL of Windows95 while the                 
 operating system is performing the initial check of the system                 
 configuration.                                                                 
                                                                                
 FIX:                                                                           
 The cause of the failure is that Windows95 sees the single                     
 LAN adapter as 2 separate adapters and configures both the                     
 actual and the "phantom" adapter with the same system resources.               
 This results in the Control Panel Device Manager marking the                   
 "phantom" LAN adapter card icon with either a yellow exclamation               
 mark or a red X.                                                               
                                                                                
 To resolve this failure, perform the following steps:                          
 1) Access the Control Panel Device Manager.                                    
 2) Select the "phantom" LAN adapter card.                                      
 3) Click on the REMOVE button.                                                 
 4) Confirm the activity and allow Windows95 to reboot.                         
                                                                                
 When the system reboots, the Control Panel Device Manager will                 
 correctly indicate that only one LAN adapter card is installed.                
                                                                                
 Windows95 is a trademark of the Microsoft Corporation.