This README file contains the latest information about installing and uninstalling Linux version of the IBM® eServer (TM) BladeCenter(TM) SAN Utility version 1.02.20 Fibre Channel switch application. Refer to the IBM Support Website listed in "WEB SITES AND SUPPORT" section in this README document for the latest information and updated README file. Last Update: June 26, 2003 ============================================ CONTENTS ------------------------------------------------------------------------- 1.0 OVERVIEW 2.0 BLADECENTER SAN UTILITY VERSION HISTORY 3.0 SYSTEM REQUIREMENTS 4.0 INSTALLING BLADECENTER SAN UTILITY FOR LINUX 5.0 UNINSTALLING BLADECENTER SAN UTILITY FOR LINUX 6.0 WEB SITES AND SUPPORT 7.0 TRADEMARKS 8.0 NOTICES ============================================ 1.0 OVERVIEW ------------------------------------------------------------------------- The BladeCenter SAN Utility application is used to access and configure the BladeCenter Fibre Channel switch modules. The SAN Utility can be installed on a BladeCenter HS20 blade server or an external network management workstation configured with one of the Linux operating systems described in “SYSTEM REQUIREMENTS” section of this README document. This README document lists the system requirements and explains how to install and uninstall the SAN Utility for Linux. ============================================ 2.0 BLADECENTER SAN UTILITY VERSION HISTORY ------------------------------------------------------------------------- Version 1.02.20 - This is the latest release of the BladeCenter SAN Utility for Linux Version 1.02.18 - Initial Release Version ============================================ 3.0 SYSTEM REQUIREMENTS ------------------------------------------------------------------------- Operating systems Red Hat Linux® Advanced Server Version 2.1 Red Hat Linux Version 7.3 SuSE Linux Professional Version 8.0 Memory 128 MB minimum Disk space 150 MB for each installation Processor 300 MHz or faster Hardware CD-ROM drive, 10/100/1000 Base-T Ethernet port Internet browser Netscape Navigator and Conquer BladeCenter 2-port Fibre Channel Switch Firmware must be version 1.4.0.42 or greater. BladeCenter Management Module firmware version must be BRET30A or greater. ============================================ 4.0 INSTALLING BLADECENTER SAN UTILITY FOR LINUX ------------------------------------------------------------------------- For more detailed information about using the BladeCenter SAN Utility for configuring and managing your BladeCenter Fibre Channel switch module, see the IBM BladeCenter Fibre Channel Switch Management User’s Guide on the IBM BladeCenter Documentation CD or http://www.ibm.com/eserver/bladecenter/ on the World Wide Web. Complete the following steps to install the SAN Utility on a network management station or HS20 blade server that is configured with Red Hat Linux or SuSE Linux Professional: 1. Close all open programs. Insert the IBM BladeCenter SAN Utility CD into the CD-ROM drive. Complete the following steps: a. Open an xterm or other terminal window. b. Mount the CD. From a shell command-line prompt, type the following command and press Enter: mount /mnt/cdrom 2. To install the SAN Utility: To install directly from CD type "sh /mnt/cdrom/Linux/Linux_1.02.20.bin" or To copy and install from hard drive, do the following: a. Download the Linux_1.02.20.bin file b. Open a terminal window for the directory in which the Linux_1.02.20.bin file was saved. c. Type "sh Linux_1.02.20.bin" 3. Follow the BladeCenter SAN Utility installation instructions. 4. When the installation is completed, from a command prompt, type one the following commands and press Enter: sh /opt/BladecenterSANUtility/BladeCenterSANUtility or sh /opt/runBladeCenterSANUtility If a default fabric view file exists, the Enter Default File Password for Loading File window opens. Otherwise, the SAN Utility window opens. For more detailed information about using the BladeCenter SAN Utility for configuring and managing your BladeCenter Fibre Channel switch module, see the IBM BladeCenter Fibre Channel Switch Management User’s Guide on the IBM BladeCenter Documentation CD or http://www.ibm.com/eserver/bladecenter/ on the World Wide Web. Important: Before you configure your switch module, be sure that the management modules in your BladeCenter unit are properly configured. In addition, to access and manage your switch module from an external environment, you might need to enable certain features, such as the external ports and external management over all ports. See the applicable BladeCenter Unit Installation and User’s Guide publications on the IBM BladeCenter Documentation CD for more information. ============================================ 5.0 UNINSTALLING BLADECENTER SAN UTILITY FOR LINUX ------------------------------------------------------------------------- The Uninstaller Data folder, which contains the Uninstall BladeCenter SAN Utility program that is used to uninstall the SAN Utility from a blade server running Red Hat Linux or SuSE Linux Professional, is copied into the installation folder during the initial SAN Utility installation process. In addition, a shortcut to the uninstallation program is installed in the user’s home directory during the SAN Utility installation process. The default installation directory is /opt/BladeCenterSANUtility/. To uninstall the SAN Utility, at the command prompt, Type # cd /opt/ Press Enter Type "#sh Uninstall_IBM_BladeCenter_San_Utility Press Enter. ============================================ 6.0 WEB SITES AND SUPPORT ------------------------------------------------------------------------- 6.1 IBM Support Web Site: http://www.ibm.com/pc/support 6.2 IBM eServer xSeries BladeCenter Marketing Web Site: http://www.ibm.com/servers/eserver/bladecenter 6.3 If you have any questions or problems about this package go to the following Help Center World Telephone Numbers URL: http://www.ibm.com/planetwide ============================================ 7.0 TRADEMARKS ------------------------------------------------------------------------- The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM BladeCenter eServer Other company, product, and service names may be trademarks or service marks of others. ============================================ 8.0 NOTICES ------------------------------------------------------------------------- INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. IBM is a trademark of IBM Corporation in the United States, other countries, or both. Lotus, Lotus Notes, SmartSuite, and Domino are trademarks of Lotus Development Corporation and/or IBM Corporation in the United States, other countries, or both. ActionMedia, LANDesk, MMX, Pentium, and ProShare are trademarks of Intel Corporation in the United States, other countries, or both. Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Linux is a registered trademark of Linus Torvalds. Other company, product, or service names may be trademarks or service marks of others. (C) Copyright IBM Corporation 1999, 2003. All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.