QLogic SANsurfer Pro for Linux on Power (LoP) operating system environments version 2.0.30b81 NOTE TO SERVICE – Reference RETAIN # N/A This program was previously released as IBM FAStT Management Suite Java (FAStT MSJ). Starting with this release, IBM will not release separately an IBMized version of the QLogic SANsurfer HBA Manager or SANsurfer PRO program. The terms FAStT MSJ and SANsurfer will be used interchangeably from this release forward. Last update: 05/18/2006 05/18/2006: Release of 2.0.30 build 81. This version of SANsurfer provides the following fixes and enhancements - Fix SANsurfer build 78 qlremote required different libraries to start in Linux on Power OS environment - Fix incorrect qlremote file link/file location in Linux on Power OS environment - Fix the problem that caused the NVRAM settings not saved correctly problem Linux on Power OS environment - For Solaris only: - Fix HBAAPI/SDMAPI shared library issue. - Fix issue is FOAPI crash and QLC only install. - Fix GUI installer/application crashes on SuSE SLES 9 SP2/3 - Various application updates (GUI/agent) and new API sets (FOAPI/SDMAPI/HBAAPI) to support QLE210/220 HBAs. Requires special driver with 40.17.04 FW. - Update Topology Code - Fix Beacon sync issues (topology vs tree). - Fix issues with Switch E-Port discoveries. - Display switch based on type (QLogic switches). - Add switch IP (In band)/Info right clicks. - Add RH 4.0 inbox driver with IOCTL kernel module support - Rebuild all the Solaris agents with the new SDMAPI. This API fixes the display of Actual Connection Option (loop down, should be unknown). Various other HBAAPI fixes as well. - Rebuild all the Linux agents with the new SDMAPI/FOAPI. This fixes the IA64 unaligned access issues. - Fix an issue in the SDMAPI where setting the Operation Mode to six causes the return value to be seven. It seems three parameters: NVRAMVarEnableFCConfirm, NVRAMVarEnableCRN, and NVRAMVarNoLogoOnLinkDown where supposed to be set to SD_UNDEFINED_OFFSET for 4G (unused). These parameters happen to have the same offset as Operation Mode. - Fix an issue with boot device selection where if the LUN ID is greater than or equal to 128 the Unicode character would be set to 0xff80 (preserving sign bit on cast, C to Java). - Fix a missing memset in the get OptionROM versions RPC call. At times this will cause unprintable characters to be seen in the displays. - Modified the existing code to use the first LUN for the target type instead of the last LUN (to classify tape libraries properly - Fix a loopback test failure in IA64 server - Fix AMD64 install issue: missing lib files after install causing qlremote not to start (You can use the old IA32 install on AMD64). - New Linux FO/SDM APIs - New Solaris SDM API - Fix diagnostics issue with link status. - Add support for RedHat 4.0 Linux on Power (new JVM version) - Update to the latest Linux SDM/FO API set. - Fix OptionROM update issue (invalid handle). - Fix missing HBA ports after many driver loads (2.6 Kernel: max 32) - Incorrect model names (qla2300 for all HBAs) - Fix a GUI issue with updating and saving Flash on 2Gbps 23xx HBAs - Fix an issue with Windows XP custom install (agent install not shown - Update the completion message in Linux OS environment during delete adapter/device persistent data (unload module/ram disk - Fix the General Config Wizard in selecting a unconfigured HBA by default. - Update the Switch Manager application for the IBM version of SANsurfer Pro to 5.05.1.04. - Update the portmap service to uninstall the QLogic version (avoid causing issues with MS Unix Services). - Update to fix various host type logic issues seen after code cleanup (persistent binding: sequential id). - Update Linux on Power installers to remove ia32 iSCSI agent display during custom install selection (Update description) - Add QLE/QLA HBA multi selection break for OptionROM update - Solaris environment Only: - Fix a Config Wizard issue where the persistent bind tab was not being displayed properly in mixed QLA/QLC systems. - Fix device list display to not show the Target ID on QLC claimed HBA Ports. - Fix exception in cell renderer when binding a unconfigured device. - For Windows Only: Update the agent to properly read the fabric scanning parameter from agent.properties. - Fix VPD display BIOS version alignment - Update host checks to be methods in the Host class - Add in code to get the Serial number from VPD (4G cards only) - Update Solaris SDMAPI to work around NVRAM update issue (buffer too small). 02/01/2006: Release of 2.0.30 build 62. This version of SANsurfer provides support for 4Gbps QLA 246x FC HBAs and new SCSI Read Capacity (16) command (This is for LUN sizes greater than 2TB .) The following defects are also Fix in this release - Add Policy checks to wizard configurations. - Windows Portmapper update to avoid Unix Services NFS crash. - Fix non-shared LUNs were being disabled. - Fix various sorting ERs in various tables. - Resolved a local host refresh issue (multi refreshes caused multiple program freezes). - Fix the sequence number/status issue in the NetWare agent. - Update Windows SDMAPI to support preserving NVRAM defaults on 4Gbps HBA cards. - NetWare: Fix a NVRAM update issue on 23xx cards (missing /wrong memset). - Fix an issue with tool tips (HBA/Ports) - Various online help errors - Fix issue setting the same target id to all path (Failover) on Linux a. Fix Target Persistent binding tab. b. Fix Config Wizard. c. Fix Port configuration. 03/14/2005: Release of 2.0.30 build 18. This version of SANsurfer supports Linux OS kernel 2.6 (ie. SLES 9 and RHEL 4) The following defects are also Fix in this release A. Add SANsurfer Launcher Fabric Library calls (Windows Only) B. Add code to enable all LUN is Bind By Port (LUN masking is disabled). C. Fix a install issue with QLogic SANsurfer (Power PC version only) D. Fix ER0000000040050 NVRAM gets Update with an invalid file. The wrong file set the subsystem vendor id to 0000 and subsystem device id to 000. 08/31/2004: Release of 2.0.29 build 39. Changes to the GUI interface to improve usability. A list of new features is as followed: A. New Failover Wizard B. New Lun Masking Wizard C. New General Configuration Wizard D. Revamped Target Persistent Binding E. New Email Notifications (SMTP only) F. Selective Target Failover G. New Port Level in HBA tree (many other application changes) H. Revamped component level install/uninstall I. Local/remote Update Driver (Windows only) J. New localhost edition (Windows/Linux only) K. New Driver parameters, L. Display true value of HBA’s Data rate and Connection mode The following defects are also Fix in this release. A. Fix issue seen when using IBM FAStT FC HBAs, the Microsoft Windows Event log would fill up with beacon operation failures. The event ID is 258. B. Fix Login retry count incorrect after updating nvram with nvram23.dat file for IBM FC-2/FC2-133 HBAs. The affected OSes are Microsoft Windows/Linux. C. Remove filtering of IBM FC HBA WWNs, since the Microsoft Windows driver issue has been Fix in 9.x series driver. This will allow IBM FC HBA targets to be found. D. Update the default install location for SUN Solaris platforms. It is no longer installed to /usr/local/bin. Qlremote is now installed in the application install folder 04/05/2004: Release of 2.0 release 46 - Add support for RH EE 3.0, Linux 7.00.xx series HBA driver and Microsoft Windows version 8.2.3.66 HBA driver. 07/21/2003: Release of 2.0 release 42 - Add support for new device drivers to the local.properties file. 03/21/2003: Release of 2.0 release 40 02/21/2003: Release of version 2.0 release 38 - Add supported drivers WIN32 8.1.5.62, Linux 6.04.00 and NetWare 6.50r to local.properties file. 06/24/2002: Release of version 2.0 release 33 - Add supported drivers NT 8.1.5.60, Linux 6.0, and NetWare 6.50q to local.properties file. - Fix API issue with FC tape (incorrect bus direction set). 03/13/2002: Release of version 2.0 release 32. - Update Windows and NW agents and Fix miscellaneous problems in the GUI - Removed Policy option from the View menu to prevent inadvertent masking of Window based system LUNs. See Retain TIP. 11/05/2001: Release of version 2.0 release 15 - Update Windows and NW agents and Fix miscellaneous problems in the GUI 08/21/2001: Initial release version 2.0