IBM eserver xSeries 235 Remote Supervisor Adapter Firmware Update Utility System 8671 Version 1.08, GRET23B Problem(s) Fixed: - Corrected a counter problem that could result in a server clock skew in certain IBM Director environments. - Fixed a Maximum Segment Size negotiation problem on the network interface which could have prevented oversized data packets from being delivered. - Corrected a problem which caused the Remote Supervisor Adapter to not renew its DHCP lease when the DHCP server is not on the same subnet mask/network as the Remote Supervisor Adapter. - Fixed a problem which caused the Remote Supervisor Adapter not to reaquire a new IP address when the former address is lost. - Corrected a problem that caused the Remote Supervisor Adapter to report the final hours of April 30th in certain time zones as April 31st Enhancement: - Allow dashes in the LDAP ASM Group Filter Name - Increased the time to live to 128 on all packets from the Remote Supervisor Adapter to accommodate an increased number of network hops. Limitations: Dependencies: Version 1.07, GRET23A Problem(s) Fixed: - Corrected problem with DNS Enable/Disable causing confusion due to case sensitivity/inconsistency - Corrected the problem with Event Action Plan not occurring - Corrected the problem with RSA rebooting with port scan running - Corrected the problem with not being able to access scalable partition settings Enhancement: Limitations: Dependencies: Version 1.06, GRET21A Problem(s) Fixed: - Corrected a problem that caused the connection to drop during a remote graphics session. - Corrected problem with ANSI interface Remote Text on RSA not working via serial or Telnet connection Enhancement: - Removed the ISMP firmware packet from the diskette. The DMCFLASH.PKT file is now located on the ISMP firmware update diskette. Limitations: Dependencies: Version 1.05, GRET20A Problem(s) Fixed: - Changed build ID numbers that were not used to not appear on the Web interface - Changed VRM information message to severity ERROR - Picked up the latest ISMP firmware update - Fixed an issue where resetting the ASM caused it to respond to commands very slowly - Created new error log message for the case when the server has an incorrect VRM and/or CPU configuration - Corrected an error log message via the ASM interconnect that reported a power supply over voltage incorrectly - Corrected an alert where if powergood has been detected to be in low range an error is generated instead of a warning - Corrected an issue where remote graphics hangs if keyboard or mouse data is input too rapidly - Enable PXE boot support Enhancement: Limitations: Dependencies: Version 1.04, GRET19A Problem(s) Fixed: Enhancement: - Changes to support 533 FSB Limitations: Dependencies: Version 1.03, GRET18A Problem(s) Fixed: - Fixed ASM interconnect issue when some machines fail to show up in the peer table - Prevent remote supervisor adapter from receiving alerts over ASM interconnect and locally if it is incorrectly connected Enhancement: Limitations: Dependencies: Version 1.02, GRET14A Problem(s) Fixed: - Clarify ASM interconnect hard drive and CPU warning - Correct warning voltage threshold via ASM interconnect Enhancement: - Translate LSI BIOS message in log Limitations: Dependencies: Version 1.01, GRET09A Problem(s) Fixed: Enhancement: - Picked up the latest ISMP firmware update Limitations: Dependencies: Version 1.00, GRET08A - First release