IBM System x3550 Baseboard Management Controller (BMC) Update Diskette Version 1.09 build ID GFBT25AUS System machine type 7978 Change History ______________________________________ Baseboard Management Controller Version 1.09 GFBT25AUS - Added OpenIPMI support to the flash utility. Baseboard Management Controller Version 1.08 GFBT24AUS - Fixed a DC power on problem, system would not power on when the power button was pressed. Baseboard Management Controller Version 1.07 GFBT23AUS - Make voltage fault sensor reading type 3 Baseboard Management Controller Version 1.06 GFBT22AUS - Fixed a problem where the Power Supply LED would go out when the faulty power supply was removed from the system. - Fixed a fan ramping problem, fans would not ramp up when they should have. Baseboard Management Controller Version 1.05 GFBT21AUS - Fixed a problem where the system would boot to back up BIOS incorrectly - Released a new version of the PECI driver - Removed the logging of proc hot assertions Baseboard Management Controller Version 1.04 GFBT20AUS - Removed sensors 76 and 77, moved their function to sensors 70 and 71 - Added sensor 26 which supports channel A, B, C and D faults and LEDs - Fixed Vbatt detection - Added a SEL entry when ABR is asserted Baseboard Management Controller Version 1.03 GFBT19AUS - Added flash3-1.104 to this build - Modified Reading Type 3 sensors so offset 1 will assert and deassert the sensor - Fixed power supply fan fault sensor so it will light correct LEDs - Fixed 5V under fault sensor so it will light correct LEDs Baseboard Management Controller Version 1.02 GFBT18AUS - Full support for PECI and Woodcrest Baseboard Management Controller Version 1.01 GFBT17AUS - Initial Woodcrest release - Fixed front panel Temp LED from lighting invalidly Baseboard Management Controller Version 1.00 GFBT16DUS - Initial release (C) Copyright International Business Machines Corporation 2006. All rights reserved.