Brocade SAN Switch Modules for IBM BladeCenter Firmware Update Version 5.0.5a Brocade Fabric OS v5.0.5a is a maintenance release with a new function. 5.0.5a Problem(s) Fixed: Fixes the error message seen with portCfgPort to explain that the command cannot be applied to ports connected to internal server blades. Enhancements: Support for Dynamic Ports on Demand Licensing for the 10-Port 4Gb Brocade Switch Module. Refer to the readme and release notes for more details on using this function. 5.0.4a Problem(s) Fixed: - Frame may be dropped in NPIV device load test environment. may impact a 4Gig switch with multiple devices attached to a single Single host talking to multiple targets in session-based zoning. - In interop mode, process login accept (PLOGI ACC) frame to n_ports is dropped by switch. The problem occurs in a configuration with a SilkWorm switch running Fabric OS v4.4.0 or later and 3rd party switches in interop mode. The same frame drop does not occur on pre-Fabric OS v4.4.0 switches. - Host cannot see target after a switch running Fabric OS v5.0.x reboots while establishing session for a specific target. Symptom: If the SCSI query failed while the switch was establishing a session with the target after process login to an n_port (PLOGI), the device was not considered a fibre channel protocol (FCP) device even though the process login (PRLI) ACCEPT assigned the FCP type. Enhancement: Limitations: Dependencies: 5.0.3a Problem(s) Fixed: - merging a Fabric OS v5.0.x switch into a fabric running Fabric OS v4.2.x or earlier on making zoning changes using Web Tools on Fabric OS v5.0.x results in the host losing access to the target. - SilkWorm 3016 over-voltage error: false error is reported to the log. Enhancement: Limitations: Dependencies: 5.0.2 Problem(s) Fixed: - SNMP walk on MIB-2 increases the memory usage of SNMP daemon - API returns error intermittently when trying to establish a session with the proxy switch when FM tries to retrieve Port Stats and End-to-End Monitoring. - Blade/Brocade 4GB: (20PT) third party 4GB HBA daughter card not working with third party switch chassis. Enhancement: supports one additional platform: the SilkWorm 4020 Limitations: Dependencies: