ATI RV100 Video FLASH Utility -Version yi001650.004          3/13/2003

  Fixes:  SuSe & RedHat Remote Video Hang during Installation.

  This FLASH update must only be used on the IBM Remote Supervisor Adapter II.  To 
  use this FLASH update utility on the Remote Supervisor Adapter II, follow the 
  directions below:

  1.  Place the diskette in drive A and boot from it.
        NOTE:  Your system must be set to boot to floppy first.
  2.  Turn your system on.
  3.  Follow the on-screen instructions until the update is complete.
  4.  Remove the floppy when the update is complete.
  5.  Reboot the system with either Ctrl+Alt+Del or by powering off, then
      back on.

  NOTE:  Do not attempt to run this FLASH utlity from a DOS prompt under
         a Windows operating system.  It will not work.

  PRESS ANY KEY TO PROCEED WITH THE FLASH UPDATE.