LS20 POST/BIOS Flash Disk
	Version 1.08, , Build ID: BKE121AUS  
        Installation README File
	System Supported: 8850


Version 1.08 - BKJT21A

Added support for 4GB DIMMs
Problem fixed: CPUID not reporting model correctly.

Version 1.07 - BKE120A 

Change the default setting for chipkill to enabled.
Problem fixed: Updated IOMMU Help Screen.                                                 
Problem fixed: wflash, lflash fails to update.                                           
Problem fixed: SLES9 U1/ RHEL4 U1 Kernel panic.                       
Probelm fixed: Configuration error w/ single CPU.                       

Version 1.06 - BKE119A 

Added support for HPET option.       		
Problem fixed: DOS flash update fails to update with certain parts.
Problem fixed: SETUP text corruption when Remote Console Redirection is enabled.

Version 1.05 - BKJT18D

Note: Version 1.05 has been re-released with a new flash2.exe utility to accomodate multiple BIOS ROMs. 
	This utility may be required to update this latest firmware.

Problem fixed: Memory latency is not same on Processor1 and Processor 2. 
Problem fixed: Systems may exhibit clock drift with 2 CPUS installed. 
Problem fixed: Opteron errata 122 and 131. 
Problem fixed: RHEL3 U5 intermittently reboots. 
Problem fixed: Incorrect Processor power rating reported to BMC which could result in uneccessary CPU throttling in the event of a power supply failure. 
Update: Added Microcode support for Rev-E JH Processors. 

Note: On the POST screen, adjusted estimated time for BIOS flash programming. 
New flash parts on some Blades may take up to 2 minutes to program.

Version 1.04 - BKJT18C

Problem fixed: System clock loses up to 1 minute on every boot. 
Problem fixed: Unsupported, high power processors are not identified as unsupported and boot up without error. 
	Running in this mode may result in power and thermal alerts. 
Changes added to alert user of unsupported the configuration and processor is throttled 
Problem fixed: BIOS flash fails to recognize new Sharp or Intel EEPROMs and prevents BIOS firmware updates from completing.

Version 1.03

Problem fixed: Customer installs dual core processors, BIOS does not display information 
	differentiating single core and dual core processors. 
Changes added to POST and BIOS Setup to properly display processor configuration information. 
Problem fixed: O/S Boot sometimes fails on RedHat REL3-U4 


Version 1.01 - BKE116A

Initial release