********************************************************************* * * * Adaptec 94xx SAS BIOS Update Diskette * * * ********************************************************************* CONTENTS ________ 1.0 Overview 1.1 List of critical changes and corrections 2.0 Installation Instructions 3.0 Web Site and Support Phone Number 4.0 Trademarks and Notices 5.0 Disclaimer 1.0 Overview _____________ Support is provided for the adp94xx Adaptec Serial Attached SAS controllers. 1.1 List of critical changes and corrections __________________________________________________ V1548 o Adding x260 SAS backplane support. v1325 o Adding support for alternate flash modules to be used in x460, x366. This fix is mandatory for systems or FRUs manufactured after November 2005. v1324 o Fixes for hangs in x460 Multi-node configurations 2.0 Installation Instructions _____________________________ The SAS BIOS Update diskette is released as a bootable diskette image. To update the SAS BIOS in the system, insert the diskette and reboot the system. The utility will report when the SAS BIOS update is complete. The current SAS BIOS level is displayed during system booting when the SAS BIOS is scanning for drives. 3.0 Web Sites and Support Phone Number _______________________________________ 3.1 IBM Support Web Site: http://www.pc.ibm.com/support 3.2 IBM Marketing Web Site: http://www.pc.ibm.com/ww/eserver/xseries/ 3.3 If you have any questions about this update, or problems applying the update go to the following Help Center World Telephone Numbers URL: http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html. 4.0 Trademarks and Notices ___________________________ The following terms are trademarks of the IBM Corporation in the United States or other countries or both: Active PCI OS/2 Warp HelpCenter PC Server IBM Predictive Failure Analysis Netfinity ServeRAID Netfinity Manager ServerGuide OS/2 Microsoft, Windows, Windows Server 2003, Windows XP, Windows 2000, and Windows NT are trademarks or registered trademarks of Microsoft Corporation. Adaptec is a trademark or registered trademark of Adaptec, Inc. Other company, product, and service names may be trademarks or service marks of others. 5.0 Disclaimer _______________ THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with Appendix A: Package Specific Installation Instruction This update is packaged as a self-extracting PackageForTheWeb (PFTW) executable file. To unpack, this update requires that your TEMP environment variable be set to a path with read/write access. You must be logged in as an administrator. The package update log, ux.log, is created on the system drive. To locate the log file go to: %SystemDrive%\uxlog\ux.log The command-line syntax for PackageForTheWeb firmware update package is: Package.exe [-s] [-a [-s] | [-r] | [-c] | [-x directory] | [-xd] | [-w] | [-?] ] [-s] This command installs the Package-For-The-Web software silently and does not prompt if files are to be over-written in the %temp% directory. [-a] This command passes all subsequent commands to the PFTW software to install the update package. [-s] This command runs a silent and unattended update. For firmware updates, the update is scheduled to run on the next reboot. An immediate reboot can be forced with the -r option. [-r] This command schedules the update and reboot immediately. It can be used with or without the -s command. [-c] This command cancels any scheduled firmware update and records results of this operation in the log file. Only one firmware package can be scheduled at a time, if a firmware update needs to be applied instead of the currently scheduled firmware update package, cancel the current (run with the -c option on any firmware package) package. Then, run the applicable firmware package. [-x directory] This command is used with firmware updates to extract the update to the directory named directory. The PackageForTheWeb executable extracts itself to a subdirectory in the %TEMP% directory, a relative directory will be relative to that location. You must specify an absolute directory if you do not want to use the default directory. [-xd] This command is used with firmware updates to extract to a floppy diskette. The floppy diskette can then be used to boot from and apply the update. This option is not available for all firmware updates, such as tape drive and hard-disk drive updates. [-w] PowerQuest Virtual Boot Environment requires that there are 2 free sectors on the first track before it can schedule a firmware update. Use this option only if scheduling an update failed because 2 free sectors were not available on the first track. This option clears the non-boot and the non-partition information sectors on the first track. Typically, these sectors are not used. Before clearing the sectors a copy of the complete first track is saved in the %temp% directory from which the update runs. [-?] This command displays information about the command line switches. The command line switches -s, -r -c and -e are unnattended. Other command line options such as display help (-?) might require that you hit any key to continue. If Windows packages are run without any command line options, a GUI is displayed. This GUI offers all of the options that are available using the command line.