ATI RV100 Video FLASH Utility -Version yi010468.001         

  This FLASH update must only be used on the IBM RSA2 adapter.  To
  use this FLASH update utility on the RSA2 adapter, follow the
  directions below:

  1.  Place the diskette in drive A and boot from it.
        NOTE:  Your system must be set to boot to floppy first.
  2.  Turn your system on.
  3.  Follow the on-screen instructions until the update is complete.
  4.  Remove the floppy when the update is complete.
  5.  Reboot the system with either Ctrl+Alt+Del or by powering off, then
      back on.

  NOTE:  Do not attempt to run this FLASH utlity from a DOS prompt under
         a Windows operating system.  It will not work.

  PRESS ANY KEY TO PROCEED WITH THE FLASH UPDATE.