IBM eserver xSeries 445 Remote Supervisor Adapter II EXA Update for Windows System 8870 Version 1.03, Build ID: REE822A, Revision 16 CONTENTS ________ 1.0 Overview 2.0 Change History 3.0 Installation and Setup Instructions 4.0 Unattended Mode 5.0 Web Sites and support phone Number 6.0 Trademarks and Notices 7.0 Disclaimer 1.0 Overview ________________________ 1.1 This will update the IBM Remote Supervisor Adapter II EXA software only. It will not affect any device drivers. 1.2 Limitations If there is an error in loading the IBM Remote Supervisor Adapter II EXA software, retry loading the software by repeating the instructions in section 3.0. 1.3 Enhancements - none 1.4. Level of Recommendations and Prerequisites for the update: - Multi-lun support is needed in order to mount more then one remote drive simultaneously. The linux kernel 2.4.20 and later have the appropriate multi-lun support, however this support needs to be enabled at kernel build time. Currently, only the SLES 8.0 SP3 distribution has multi-Lun support available and enabled. RedHat AS 3.0 has a 2.4.21 kernel, but does not have multi-lun support enabled by default. 1.5 Dependencies: - BIOS version 1.10 or greater is required to support the IBM Remote Supervisor Adapter II EXA. 2.0 Change History ________________________ IBM Remote Supervisor Adapter II EXA Update Version 1.03, REE822A - Updated the Integrated System Management Processor firmware to resolve the memory multi-bit errors caused by a timing issue coming out of system stand by mode. - Corrected problem where existing static partition settings might be lost during a firmware update. - Corrected Machine Type and Model reference typographical errors in readme documentation. IBM Remote Supervisor Adapter II Update Version 1.02, REE820A - Added SSH support - Added DNS support for Lightweight Directory Access Protocol - Enhanced the command line interface - Corrected problem where server is non-responsive 76 days after reset. - Fixed problem with clearing Daylight Savings Time (DST) mode across multinode systems. - Corrected problems with lflash and wflash firmware update utilities. - Fixed problem where user permissions could not be set from the web interface. IBM Remote Supervisor Adapter II Update Version 1.01, REE816A - Fixed problem where RXE-100 events were not sent correctly. - Corrected Monitor log event selection button to work properly. - Fixed problem with firmware updates to RXE-100 expansion. - Corrected Blue Locator LED state during normal OS operation. - Corrected UUID sent to Director from RXE-100 expansion events. - Added DNS support for LDAP. - Fixed problem with daylight savings time not working with CLI. IBM Remote Supervisor Adapter II Update Version 1.00, REE811A - First release 3.0 Installing and Setup Instructions ______________________________________ This utility will update the IBM Remote Supervisor Adapter II EXA software under the Windows Operating System. It requires the installation of the correct Remote Supervisor Adapter II EXA for Windows device driver. 3.1 Performing this code update (GUI) _______________________________________ - Run the "IBM xSeries 445 Windows Remote Supervisory Adapter II EXA Update" by double-clicking the .EXE. - Choose "Perform Update" and click the "Next" button. - If the update is meant for the system on which it is running, the "Next" button will appear. Click the "Next" button to continue. - Click the "Exit" button. 3.2 Extracting the Windows update files (GUI) _______________________________________________ - Run the "IBM xSeries 445 Windows Remote Supervisory Adapter II EXA Update" by double-clicking the .EXE. - Choose "Extract to Hard Drive" and click the "Next" button. - Choose a directory into which the Windows update files will be saved in the "Save As" dialog. - The files extracted are all the files that are necessary to perform a RSAII EXA firmware update under Windows. Run "wflash -r" from a command line to update RSAII EXA firmware. - Click the "Exit" button. 4.0 Unattended Mode ________________________ Extracting the Windows update files (command line) __________________________________________________ - Run the "IBM xSeries 445 Windows Remote Supervisor Adapter II EXA Update" with the following command line: ".exe -s -a -x " where .exe is the downloaded update and is the path to which the Windows update files will be extracted. - The files extracted are all the files that are necessary to perform a RSAII EXA firmware update under Windows. Run "wflash -r" from a command line to update RSAII EXA firmware. 5.0 WEB Sites and Support Phone Number _________________________________________ 5.1 IBM Support Web Site: http://www.pc.ibm.com/support 5.2 IBM eserver xSeries Web Site: http://www.ibm.com/eserver/xseries 5.3 If you have any questions about this update, or problems applying the update, go to the following Help Center World Telephone Numbers and URL: http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html. 6.0. TradeMarks and Notices ______________________________ 6.1 The following terms are trademarks of the IBM Corporation in the United States, or other countries or both: * IBM * Advanced System Management Other company, product, and service names may be trademarks or service marks of others. 7.0. Disclaimer __________________ 7.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 7.2 Note to Government users: Note to U.S. Government users-- Documentation related to restricted rights-- Use, duplication and disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.