Readme File for SANavigator Diagnostic and Management Software for Windows NT4 and Windows 2000. This README file contains the latest information about installing SANavigator Diagnostic and Management Software for Windows NT4 and Windows 2000. Refer to the IBM Support Website for the latest information and updated README file (See Section 13.0 below). Last update: Initial Release 11/06/2001 CONTENTS -------- This readme file includes the following information: 1.0 Overview 2.0 Change History 3.0 OS Support 4.0 Components 5.0 Configuration 6.0 Requirements 7.0 Downloading SANavigator 8.0 Installing the FAStT Host Bus Adapter SNIA API Library 9.0 Installing SANavigator 10.0 Starting SANavigator 11.0 Uninstalling SANavigator 12.0 Limitations 13.0 Web Sites and Support Phone number 14.0 Trademarks and Notices 15.0 Disclaimer If you have downloaded the SANavigator package from the IBM Support web site, skip to Web Download section below. CD Installation --------------- Follow the installation instructions that are enclosed in the CD jacket. To enable in-band management, you need to install the FAStT HBA API library. You can get the library from the IBM Support web site. See Web Download below. Web Download ------------ The package includes the following: - EUSDSetup - A zip file that will install the API Library to allow for In-band discovery of your SAN. In-band allows for the transmission of management protocol over the Fibre Channel medium. It is recommended that this library be installed to increase the capability of SANavigator to discover and monitor your Storage Area Network (SAN). 1.0 OVERVIEW ------------ SANavigator management software provides easy, centralized management and diagnosis of your SAN, and quick access to all device configuration applications. It provides an intuitive interface and powerful point and click functionality. Through its graphical display of the complete SAN, administrators of all levels can manage their networks with ease. With SANavigator you can monitor the health of your SAN and identify potential problems that may impact the performance and/or the availability of your SAN. Along with the available Problem Determination MAPS (PDs), SANavigator greatly facilitates problem isolation and repair of your SAN. Some of the features include: · Intuitive GUI with physical topology display. · Out-of-band and in-band management (requires API library) · Quick identification of port connections for each of your devices · Launch capability of applications and tools such as the IBM FAStT Storage Manager and IBM FAStT MSJ diagnostic. · Event logging · Ability to easily export SAN files so that they can be imported into a remote SANavigator system, displayed and analyzed. 2.0 CHANGE HISTORY ------------------ 11/06/2001: Initial release version 2.6 3.0 OS SUPPORT -------------- This application has been tested with Windows NT 4.0 SP6, Windows 2000 SP2. 4.0 COMPONENTS -------------- SANavigator consists of a Client and Server. You can install the SANavigator tool as a client, a server, or both. The major benefit of using the Client/Server feature is that you can have a SAN running on a server and have a number of clients working on the same SAN at the same time. Each client can see what all other clients are doing. Clients can be as near as across the room or as far away as halfway around the world. Each client can access as many servers as they are authorized for. Users are assigned one of three levels of authorization on the server: no access, view only, or administrative authority. Clients can set their personal preferences and they are saved locally. · SANavigator Client: This is a Java based GUI application that runs on any Windows NT\W2K system. It allows you to manage a Server connected to the network · SANavigator Server: This is a Java based application running on a Server and providing the discovery engine and maintenance of the SAN database. For in-band-discovery, the API library needs to be installed on a server that contains Host Bus Adapters. Out-of-band discovery (through the network) requires that the SAN be connected to a fabric (either switch or managed hub). 5.0 CONFIGURATION ----------------- The discovery configuration that SANavigator supports can be divided into two types: In-band and Out-of-band (Network). 5.1 In-Band If your SAN is directly connected to mini-hubs of your FAStT Storage Server or to an un-managed hub (that is no switch or managed hub is present) only in-band discovery is possible. In-band discovery functions on the system which has HBAs installed. Both the client and the server needs to be installed. 5.2 Out-of-band (Network) If your SAN is connected to a fabric (switches and\or managed Hubs network connected to your server) out-of-band management is required. The SAN discovery is done through SNMP communication. You can have both in-band and out-of-band management of your SAN. It is recommended that both in-band and out-of-band management be enabled to get the most benefit of SANavigator's discovery and monitoring capabilities. 6.0 REQUIREMENTS ----------------- 6.1 MINIMUM HARDWARE REQUIREMENTS · 400 MHz Intel Pentium II · CD ROM · 128 MB RAM · 100 MB Free Disk Space · VGA 256 Colors or Greater 6.2 SOFTWARE REQUIREMENTS · Microsoft Windows NT 4.0 Server, Enterprise Server, or Workstation with Service Pack 6, or · Windows 2000 Server, Advanced Server, or Professional 7.0. DOWNLOADING SANavigator --------------------------- To download SANavigator go to the following web site. http://www.sanavigator.com/ibm/xseries You will need to register to obtain SANavigator. Please have your FAStT Storage Server model number and serial number to complete the registration. 8.0. INSTALLING the HBA library ------------------------------- 8.1 Download the library from this web site and store it in a temp folder in the server containing the HBAs where you will be installing SANavigator. 8.2 To install the library unzip the package and execute Setup from the folder where the unzipped files were stored. You do not need to reboot. 9.0. INSTALLING SANavigator --------------------------- 9.1 Before you begin, obtain your network information, including the IP address and subnets of SAN switches and servers. 9.2 To install SANavigator on your Windows based computer: Unzip the downloaded file and run the Setup.exe file. Follow instructions displayed on the screen. Note: If the default directory is chosen, SANavigator will be installed into C:\Program Files\SANavigator2.6\ 10.0 Starting the SANavigator Server and Client ----------------------------------------------- 10.1 Once the application has been installed,launch it. You can launch SANavigator by clicking on the desktop icon. This will launch both the Client and the Server. 10.2 To launch only the client, select SANavigator Client by clicking on Start-->Programs-->SANavigator Client. 10.3 Once SANavigator is launched, it will try to discover the SAN based on the IP address of the server on which it is installed. If the IP address is not available, you will need to provide one. Select New in the Open SAN dialog and enter the IP address of your server. 10.4 In the General tab of the Discovery dialog (Click Discovery--->Setup), select in-band and out-of-band. Make sure Discovery is turned on. 10.5 For in-band, select the IBM FAStT HBA(s) that you want to in-band manage. It is recommended that you select them all to enhance the discovery and monitoring of your SAN. Please refer to the online help file for more information. 11.0 Uninstalling SANavigator ------------------------------ 11.1 Be sure to exit the application before you uninstall SANavigator. 11.2 Uninstall SANavigator by clicking: Start button-->Programs-->SANavigator2.6-->Uninstall SANavigator 12.0 LIMITATIONS ----------------- 12.1 Discovery SANavigator defaults to your local subnet for initial discovery. You will need to enter the IP and subnet of the SAN you wish to discover in the Out-of-Band tab of the Discover Setup dialog. It is more efficient to discover a large subnet by using the broadcast method rather than the sweep or individual IP method. The individual IP method may be faster when discovering a SAN on a subnet that is congested or that has long latencies. Verify that there is an Ethernet connection to the SANavigator workstation and all SAN devices before doing a discovery. Otherwise, discovery will show all red icons. In Windows NT attempting a discovery without an Ethernet connection will result in the application displaying the "Loading SAN Please Wait..." message without resolution. In Windows 2000, the message will read, "Failed to get local machine's IP address". 12.2 Topology Representation and Display Changing the color depth of the computer display may cause the window to turn black. This occurs when changing color depth and also when changing from a high resolution to a lower resolution.To obtain the best depiction of bridges and routers and the devices connected to them, enter the IP address for each (bridge and router) in the individual addresses table on the Out-of-Band tab of the Discover Setup dialog. Delete off line (red) connections and devices from the topology before connecting any new devices to the same port. Unidentified devices attached to a supported device may display as a Storage or Unknown device. To change the icon to the correct device type, right-click on the device,select "Properties," and then select the correct device type from the drop-down list. If your resolution is set at more than 1280 x 1024 pixels, some fields in the Port and LUN Performance dialogs are outside the boundary of the dialog. Increase the size of the dialog manually and they will display properly. 13.0 WEB SITES AND SUPPORT PHONE NUMBER ---------------------------------------- 13.1 IBM Support Web Site: http://www.ibm.com/pc/support 13.2 IBM eServer xSeries Marketing Web Site: http://www.ibm.com/pc/us/eserver/xseries/index.html 13.3 If you have any questions or problems about this package go to the following Help Center World Telephone Numbers URL: http://www.ibm.com/planetwide 14.0 TRADEMARKS AND NOTICES ---------------------------- 14.1 The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM Microsoft, Windows, and Windows 2000 are trademarks of Microsoft Corporation in the United States, other countries, or both. SANavigator is a trademark of SANavigator, Inc. Other company, product, and service names may be trademarks or service marks of others. 15.0 Disclaimer ----------------- 15.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 15.2 Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.