********************************************************************* * ACU command-line utility for ServeRAID 7t SATA Controller * * README.TXT * * Version 4.1-0 * ********************************************************************* CONTENTS ________ 1.0 Overview 2.0 Command Line Options 3.0 Web Site and Support Phone Number 4.0 Trademarks and Notices 5.0 Disclaimer 1.0 Overview _____________ The Array Configuration Utility (ACU) is an application used to configure ServeRAID Serial ATA controllers, such as the ServeRAID-7t, from the controller’s BIOS or MSDOS. This guide describes the functionality of ACU for MS-DOS only. See the IBM ServeRAID User’s Reference for information about using ACU from within a controller’s BIOS. 2.0 Command-line Options _______________________ For more information, please refer to the inluded Array Configuration Utility User's Guide. /P - Indicates playback mode.In this mode ACU reads the specified script file and creates Arrays based on the script. /R - Indicates record mode. In this mode ACU scans the controller's configuration and creates the script file based on the configuration. /L - Optional log file name. If specified, ACU creates a log of its activity, and any errors it encounters. /C-Optional controller number.In systems with more than one controller, specifies the controller on which to operate. /DC- Delete the given Container Number. /I - Do not wait for Build/Clear to complete while in playback mode. /S - Silent Mode, No Screen output. /ALL - Run across all the controllers. SHUT - Shutdown the controller's kernel. BUILDALL - Start Build/Verify over all Quick Init Mode Arrays. ALARM=