Readme File for the IBM FAStT Management Suite Java (MSJ) for IA-64 Linux. This README file contains the latest information about installing IBM FAStT MSJ for Linux. Refer to the IBM Support Website for the latest information and updated README file. Last update: 12/27/2003 CONTENTS -------- This readme file includes the following information: 1.0 Overview 2.0 Change History 3.0 Components 4.0 Configuration 5.0 Requirements 6.0 Downloading and installing FAStT MSJ 7.0 Executing FAStT MSJ 8.0 Uninstalling FAStT MSJ 9.0 Limitations 10.0 Web Sites and Support Phone number 11.0 Trademarks and Notices 12.0 Disclaimer =================================================================== 1.0 OVERVIEW ------------ IBM FAStT MSJ supports the following HBA's: ----------------------------------------------------------------------------- | FAStT Adapter | Qlogic Adapter | IBM Feature Code | IBM Option P/N | ------------------------------------------------------------------------------ |FAStT Host Adapter | QLA2200F/66-IBM-SP | FC2102 | 00N6881 | |FAStT FC2 | QLA2310FL-IBM-SP | FC2130 | 19K1246 | |FAStT FC2-133 | QLA2340-IBM-SP | FC2104 | 24P0960 | ------------------------------------------------------------------------------ Some of the features include: · Timely and accurate detection of I/O failures · Local and remote management of adapters · Device \ Port Configuration for fail-over capability (Linux) · Performance statistics · Central control point in a network environment · Diagnostics & utilities =================================================================== 2.0 CHANGE HISTORY ------------------ 08/21/2001: Initial release version 2.0 11/05/2001: Release of version 2.0 rls 15 Updated Linux agent and fixed miscellaneous problems in the GUI 03/06/2002: Release of version 2.0 rls 32 1) Fixed slow diagnostic performance 2) Corrects the reporting of device target,ID and Port ID values. 3) Fixed Stop on error when in Loopback test 4) Fixes erroneous reporting of device failure when a another device fails 6) Miscellaneous client fixes. 06/24/2002: Release of version 2.0 rls 33 1) Added supported drivers NT 8.1.5.60, Linux 6.0, and Netware 6.50q to local.properties file. 2) Fixed API issue with FC tape (incorrect bus direction set). 02/21/2003: Release of version 2.0 rls 38 - Added supported drivers WIN32 8.1.5.62, Linux 6.04.00 and NetWare 6.50r to local.properties file. 03/21/2003: Release of 2.0 rls 40 07/21/2003: Release of 2.0 rls 42 -Added support for new device drivers to the local.properties file. 12/17/2003: Release of 2.0 rls 43 - Support upgrading BIOS code on the IBM IBM eServer BladeCenter HS20 Fibre Channel Adapter =================================================================== 3.0 COMPONENTS -------------- IBM FAStT MSJ consists of the following components. · IBM FAStT MSJ Application: This is a Java based GUI application that runs on any Linux system network-connected to the servers and that manages the Host Bus adapters on those servers. · IBM FAStT MSJ Agent: This software is required on systems where the Host Bus adapters reside. . Wrap Connector and Coupler The IBM FAStT Host Bus Adapters (2200 and above) support Full Duplex mode which enables loop back capability. To assist you in isolating 2200 HBA loop problems, a wrap connector/coupler assembly P/N 75G2725 can be obtained from Mechanicsburg or by contacting IBM Level 2 Support. For the 23x0 a wrap plug P/N 11P3847 and coupler P/N 05N6766 are included in the FAStT 700 Storage Server carton. You can also obtain them from Mechanicsburg as a kit (P/N 24P0950). =================================================================== 4.0 CONFIGURATION ----------------- The configurations that FAStT MSJ supports can be divided into two types: Stand-alone and Networked. 4.1 STAND-ALONE --------------- If you will manage the Host Bus adapter installed in a stand-alone system, install the FAStT MSJ GUI and FAStT MSJ Linux Agent on that system 4.2 NETWORKED ------------- If you will manage the Host Bus adapter residing in a remote system in a Linux environment, install the FAStT MSJ GUI on a management system. In this case, only the FAStT MSJ Linux agent needs to be installed in the remote system. Note that a management system may contain HBAs and therefore the agent should also be installed on that system. =================================================================== 5.0 REQUIREMENTS ----------------- 5.1 HARDWARE REQUIREMENTS -------------------------- · IBM FAStT Fibre Channel HBAs (2200, 2310, 2340 or 2342) · Single or Multi-processor Server or Workstation. · Pentium III 450MHz MHz or better,128MB RAM,and a minimum 30MB disk space. 5.2 SOFTWARE REQUIREMENTS FOR Linux OS --------------------------------------- · Linux The following vendor kernels listed below have been tested and are required for proper support. -------------------------------------------------------------------------- | RedHat Advanced Server 2.1 | 2.4.9-e.27 and higher UP, SMP, Enterprise | | | (Bigmem) and Summit | |----------------------------|---------------------------------------------| | RedHat Linux 7.x | 2.4.18-19.7.x UP, SMP and Enterprise(Bigmem)| |----------------------------|---------------------------------------------| | RedHat Linux 8.0 | 2.4.18-27.8 UP, SMP, and Enterprise(Bigmem) | |----------------------------|---------------------------------------------| | United Linux 1.0 with SP3 | 2.4.21-138 | | 32-bit (see note 1) | | |----------------------------|---------------------------------------------| | United Linux 1.0 | 2.4.21 (The client code in this package will| | IA-64 (see note 1) | only install and run on 32-bit linux) | |----------------------------|---------------------------------------------| | SuSE Professional 8.1 | 2.4.19 | ------------------------------------------------------------------------- note 1 - United Linux support includes the following distributions: SuSE Linux Enterprise Server 8 (SLES 8) Turbolinux Enterprise Server 8 (TLES 8) Conectiva Linux Enterprise Edition Powered by United Linux · Must have "root" privileges · HBA Miniport Driver: 6.06.60 or later · TCP/IP Protocol · Must have Administrative Privileges to perform management functions(NVRAM modification). =================================================================== 6.0. INSTALLING FAStT MSJ ------------------------- If you have downloaded the FAStT MSJ package from the IBM Support web site, skip to Web Download section below. 6.1 CD Installation ------------------- The following files are located in the FAStT_MSJ folder in the CD. Linux · README.txt (this file) Note: The README file that is on this CD takes precedence over the one that is displayed and installed when FAStT MSJ setup is run. · FAStTMSJ_install_ia64.bin (the install file for FAStT MSJ Linux) · The FAStT MSJ User's guide 6.2 WEB Download ---------------- The package includes the following: · README.txt (the Readme file for FAStT MSJ) Note: The README file that is part of this self extracting file takes precedence over the one that is displayed and installed when FAStT MSJ setup is run. · FAStTMSJ_install_ia64.bin (the install file for FAStT MSJ Linux) · The FAStT MSJ User's guide 6.3 Installation ---------------- The FAStTMSJ_install.bin installs the FAStT MSJ Application. Depending on your requirements, not all components may be installed. Important: If FAStT MSJ is already installed, un-install it prior to installing a new copy. GUI Installation: 1. Open a shell and change to the directory that contains the FAStT MSJ installer. 2. At the prompt , type: sh FAStTMSJ_install_ia64.bin 3. At the "Choose Product Features" screen, select the desired installation: GUI and Linux Agent GUI Linux Agent You may also choose to customize your installation by clicking on the "Customize" button. 4. FAStT installs in the /opt directory. The launch script is located in the /usr directory. Command Line Installation of FAStT MSJ and the qlremote agent: 1. Open a shell and change to the directory that contains the FAStT MSJ installer. 2. At the prompt , type: sh FAStTMSJ_install.bin -i silent 3. FAStT installs in the /opt directory. The launch script is located in the /usr directory. Command Line Installation of only the qlremote agent: 1. Open a shell and change to the directory that contains the FAStT MSJ installer. 2. At the prompt , type: sh FAStTMSJ_install.bin -i silent -DCHOSEN_INSTALL_SET="QMSJ_LA" 3. FAStT installs in the /opt directory. The launch script is located in the /usr directory. =================================================================== 7.0 RUNNING FAStT MSJ ---------------------- Once the application has been installed,launch it. Note: The default FAStT MSJ password is "config". Make sure you change this password after installation to ensure that security is not compromised. To enter a new Password you must have Administrative Privileges. You cannot perform management functions and NVRAM\Flash modification unless you set a Password for FAStT MSJ. Note: Ensure that no I/O's are occurring when qlremote is running. Please refer to the online help file or the User's Guide for more information. To view the online help, go to Help and "Set Browser Location" to match the location where your preferred browser is located. The FAStT MSJ program supports Netscape Communicator (version 4.5 or greater). You may now browse the Help file by selecting "Browse Contents". 7.1 Device \ Port Configuration for fail-over capability ---------------------------------------------------------- Note: Please refer to the README file in the driver package that you installed for any updates to the following instructions on using IBM FAStT MJS program and QLRemote agent to configure LUNs for fail-over in Linux environment. 1. Open a terminal windows and run: qlremote 2. Open another terminal window and run: /usr/FAStT_MSJ 3. Connect to local host, configure LUNs to match the preferred paths shown in IBM FAStT Storage manager. Running Storage Subsystem->Profile in the Subsystem Management window will display the world-wide port name for each controller. Ensure that the preferred path in the FAStT_MSJ LUN configuration window matches the controller assignment in IBM FAStT Storage manager. 4. Apply the configuration and exit MSJ. 5. Switch to the terminal window that has qlremote running and to stop qlremote. 6. In the terminal windows type: depmod -a 7. Unload the qla2200 or qla2300 driver and then reload the driver using modprobe so the driver will pull in the new option string that was added by FAStT_MSJ. 8. Type the following command: # mkinitrd -f NOTE: This step will overwrite the original ramdisk image file if executed within the /boot directory. Specify a unique ramdisk image name to preserve the original ramdisk image. - Copy the file to /boot. For SuSE Distribution: - Type the following command: # /sbin/mk_initrd NOTE: By default, the RAMDISK images created are: /boot/initrd /boot/initrd.suse 9. If you are using lilo, in a terminal window type: /sbin/lilo Otherwise you will not be able to boot your new ramdisk image. 10. Reboot the system to the ram disk image just created. =================================================================== 8.0 Uninstalling FAStT MSJ ---------------------------- 8.1 Be sure to exit the FAStT MSJ application before you uninstall FAStT MSJ. 8.2 Change to the directory where you installed the FAStT MSJ scripts. For example, enter:cd /usr Type the following to run the InstallAnywhere Uninstaller. ./FAStT_MSJ_Uninstaller =================================================================== 9.0 LIMITATIONS ----------------- - If multiple NICs (Network Interface Cards) are present in the system, the FAStT MSJ client will broadcast to the first IP address subnet based on the binding order. Therefore, ensure that the NIC for the local subnet is first in the binding order. If this is not done, the diagnostics might not run properly and remote connection might not occur. - The FAStT MSJ application tries to help in not allowing the user to connect to the same host more than once (causes issues with policies and wasted system resources). This adds the requirement that all host IP address MUST resolve to a host name to allow connection to complete. - If DNS is not used you must edit the local host file on the systems where you are running the FAStT MSJ GUI and the QLremote agent. Add the host name to IP mapping manually. Edit the file /etc/hosts. - If the system has the firewall installed this could cause issues with async alarms from the agent running on Linux to a remote machine. This could also occur if the GUI is running on a Linux Client talking to a remote machine. To circumvent this problem do the following at a shell prompt: chkconfig --list Verify that "ipchains and iptables" in run levels 2, 3, 4, 5" are disabled. to disable at a specific run level chkconfig --level 2 ipchains off chkconfig --level 3 ipchains off chkconfig --level 4 ipchains off chkconfig --level 5 ipchains off chkconfig --level 2 iptables off chkconfig --level 3 iptables off chkconfig --level 4 iptables off chkconfig --level 5 iptables off - When a FAStT Fibre Channel HBA (QL2200, 2310, 2340 or 2342) is connected to the Fabric (switch), Loopback test is disabled since the adapter is in a point to point mode. Unplugging the cable from the Fabric and inserting a wrap connector at the end of the cable (or at the adapter) will enable loopback test. - The FAStT MSJ online web help can only be viewed by Netscape Communicator (version 4.5 or greater). - When an online device fails and goes offline and a subsequent configuration refresh occurs, the loop id for that device does not reflect the original ID since the device is in effect no longer in the loop (may show x100 or xff). - When a failure occurs during Diagnostics (Loopback test and Read/Write Buffer test) and the test is restarted immediately, MSJ may request whether or not you want to refresh the configuration. Select NO to continue the test. If YES is selected the Host may be disconnected with the following message: "Unable to connect to the Host: {Host Name / IP address}. The Host is currently in diagnostics mode, try again later." To recover, you need to stop (ctrl-c in the terminal session where you started qlremote) and then restart the agent "qlremote" =================================================================== 10.0 WEB SITES AND SUPPORT PHONE NUMBER ---------------------------------------- 10.1 IBM TotalStorage™ Disk Storage Systems Technical Support web site: http://www.ibm.com/storage/support/fastt 10.2 IBM Support Web Site: http://www.ibm.com/pc/support 10.3 If you have any questions about this update, or problem applying the update go to the following Help Center World Telephone Numbers URL: http://www.ibm.com/planetwide =================================================================== 11.0 TRADEMARKS AND NOTICES ---------------------------- 11.1 The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM Microsoft, Windows, and Windows 2000 are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. =================================================================== 12.0 Disclaimer ----------------- 12.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 12.2 Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.