V4.0 NT 4.0 Drivers Disk with 5.00.66.0000 ndis4 driver for IBM 10/100 Ethernet Server and Desktop Adapters family =========================================================== CONTENTS -------- 1.0 Overview 1.1 Limitations 2.0 Change History 3.0 Build and Installation Instructions 4.0 Configuration Information 4.1 Driver Parameters 4.2 Additional Configuration Information 5.0 Web Sites and Support Phone Number 6.0 Trademarks and Notices 7.0 License and Disclaimer 1.0 Overview _____________ This package includes the NT 4.0 ndis4 driver ver 5.00.66.0000 for all IBM Intel-based 10/100 Ethernet Server and Desktop NICs and LOMs, including the latest IBM 10/100 Ethernet Server Adapter PN 06P3601. This driver is fully Microsoft certified under MID 34582. 1.1 Limitations ----------------- This drivers software requires Microsoft Service Pack 5 or later for NT 4.0 installation. 2.0 Change History ____________________ This new v4.0 sw release replaces the current v3.72 sw release. With v4.0 sw release, IBM 10/100 Ethernet Adapters sw shares the same drivers names with Intel retail sw for PRO/100 family. v4.0 E100BNT.SYS 5.00.66.0000 v3.72 IBMFENT.SYS 4.02.35.0000 3.0 Build and Installation Instructions _________________________________________ 1) Make sure the adapter is physically installed in your server or work station prior to installing the driver software. 2) Verify that your Windows NT system is upgraded with Service Pack 5 or later. 3) After logging in to NT 4.0, go to Network then Adapters 4) Select Add and click on Have Disk 5) Enter A: for the source of the drivers ( or the CD-ROM drive if you are using the software CD ) and click OK. 6) Follow the steps on your screen to install the drivers. 7) When completed, the adapter should then show up on the Network Adapters list. 8) When drivers installation is completed, if you are installing multiple adapters and want to set up a failover team, then go to Propeties and Right Click on one of the adapters. Then follow the steps for creating an adapter team. 9) Click on Close and assign IP address either static or dynamic. 10) Reboot your system. 4.0 Configuration Information _______________________________ After following 3.0 above, your adapter should be all set to go. If you need further details, please see the guide.pdf available from this web site or from the sw CD - or go to the \info dir of the sw CD. 4.1 Driver Parameters --------------------- Refer to 4.0 above. 4.2 Additional Configuration Information ---------------------------------------- Refer to 4.0 above. 5.0 WEB Sites and Support Phone Number ________________________________________ IBM Support Web Site: http://www.ibm.com/pc/support IBM Marketing Netfinity Web Site: http://www.ibm.com/pc/netfinity ( or eServer xSeries ) If you have any questions about this update, or problems applying the update go to the following Help Center World Telephone Numbers URL: http://www.ibm.com/pc/qtechinfo/YAST-3P2QLY.html. 6.0 Trademarks and Notices ____________________________ The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM Netfinity eServer xSeries Intel is a registered trademark of Intel Corporation. Other company, product, and service names may be trademarks or service marks of others. 7.0 License and Disclaimer ___________________________ Copyright (c) 1999-2000, IBM Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of IBM Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.