Readme for QLogic ISP2xxx Flash and NOVRAM programming utility. The QLogic flash and novram programming utility is a DOS utility with the following command line options: /L xxxx = Write NOVRAM, adapter address = xxxx If no address specified then write NOVRAM to all adapters /F xxxx = Write Flash, adapter address = xxxx If no address specified then write Flash to all adapters /D xxxx = Copy NOVRAM to file: QL2xNVRM.SAV, adapter address = xxxx /W xxxx = Copy Flash to file: QL2xROM.SAV, adapter address = xxxx /U xxxx = Update Bios NOVRAM defaults, adapter address = xxxx If no address specified then Update all adapters\r\n"); /N = Use instead of NVRAMxx.DAT /O = Use instead of QL21ROM.BIN /I = Ignore Subsystem ID /M = Don't prompt for I/O address /P = Prompt for Serial Number (PRODUCTION TEST USE ONLY) /Q = Quiet Mode, no messages will be displayed /T = QLA2102 adapter (PRODUCTION TEST USE ONLY) The utility can be run without command line options and it will prompt you for the required options. Examples using some command line options: To write NOVRAM on all QLA2100 adapters in a system without being prompted for I/O address: ql2xutil /L To write NOVRAM and Flash of all adapters: ql2xutil /L /F To write NOVRAM to adapter at I/O address f400: ql2xutil /L f400 To write NOVRAM and flash to adapter at I/O address f800: ql2xutil /L f800 /F f800