Readme File for SANavigator Diagnostic and Management Software for Linux Red Hat. This README file contains the latest information about installing SANavigator Diagnostic and Management Software for Linux Red Hat 7.1 kernel 2.4.9-21 Refer to the IBM Support Website for the latest information and updated README file (http://www.ibm.com/pc/support).) For details on the installation and use of SANavigator refer to the Problem Determination MAPS document, Chapter 5 "Introduction to SANavigator" located on the IBM Support web site (http://www.ibm.com/pc/support). Last update: First Release 03/26/2002 - non API CONTENTS -------- This readme file includes the following information: 1.0 Overview 2.0 Change History 3.0 OS Support 4.0 Components 5.0 Configuration 6.0 Requirements 7.0 Obtaining the SANavigator Package 8.0 SNIA API Library 9.0 Installing SANavigator 10.0 Starting SANavigator 11.0 Uninstalling SANavigator 12.0 Limitations 13.0 Web Sites and Support Phone number 14.0 Trademarks and Notices 15.0 Disclaimer 1.0 OVERVIEW ------------ SANavigator management software provides easy, centralized management and diagnosis of your SAN, and quick access to all device configuration applications. It provides an intuitive interface and powerful point and click functionality. Through its graphical display of the complete SAN, administrators of all levels can manage their networks with ease. With SANavigator you can monitor the health of your SAN and identify potential problems that may impact the performance and/or the availability of your SAN. Along with the available Problem Determination MAPS (PDs), SANavigator greatly facilitates problem isolation and repair of your SAN. Some of the features include: · Intuitive GUI with physical topology display. · Out-of-band · Quick identification of port connections for each of your devices · Launch capability of applications and tools such as the IBM FAStT Storage Manager and IBM FAStT MSJ diagnostic. · Event logging · Ability to easily export SAN files so that they can be imported into a remote SANavigator system, displayed and analyzed. 2.0 CHANGE HISTORY ------------------ 03/22/2002: Inititial release for Linux Red Hat.version 2.7.1i. 3.0 OS SUPPORT -------------- This application has been tested with Linux Red Hat 7.1 kernel 2.4.9-21 4.0 COMPONENTS -------------- SANavigator consists of a Client and Server. You can install the SANavigator tool as a client, a server, or both. The major benefit of using the Client/Server feature is that you can have a SAN running on a server and have a number of clients working on the same SAN at the same time. Each client can see what all other clients are doing. Clients can be as near as across the room or as far away as halfway around the world. Each client can access as many servers as they are authorized for. Users are assigned one of three levels of authorization on the server: no access, view only, or administrative authority. Clients can set their personal preferences and they are saved locally. · SANavigator Client: This is a Java based GUI application that runs on any Windows NT\W2K system. It allows you to manage a Server connected to the network · SANavigator Server: This is a Java based application running on a Server and providing the discovery engine and maintenance of the SAN database. Out-of-band discovery (through the network)requires that the SAN be connected to a fabric (either switch or managed hub). 5.0 CONFIGURATION ----------------- The discovery configuration that SANavigator supports can be divided into two types: In-band and Out-of-band (Network). 5.1 In-Band If your SAN is directly connected to your FAStT Storage Server or to an un-managed hub (that is no switch or managed hub is present) only in-band discovery is possible. In-band discovery takes place on the Server where the Host Bus Adapters are located. Both the client and the server need to be installed. In-band is currently not supported due to HBA driver limitation. 5.2 Out-of-band (Network) If your SAN is connected to a fabric (switches and\or managed Hubs network connected to your server) out-of-band management is required. The SAN discovery is done through SNMP communication. 6.0 REQUIREMENTS ----------------- 6.1 MINIMUM HARDWARE REQUIREMENTS · 400 MHz Intel Pentium II · CD ROM · 128 MB RAM · 100 MB Free Disk Space · VGA 256 Colors or Greater 6.2 SOFTWARE REQUIREMENTS · Linux Red Hat version 7.1 with Kernel 2.4.9-21 · FAStT HBA device drivers at level 5.38.1 or higher. 7.0. OBTAINING THE SANavigator PACKAGE -------------------------------------- You can install SANavigator using the CD supplied in the FAStT Storage Server carton or from the IBM Support web site. Check the web site for latest information on SANavigator and to ensure that you have the latest level. 7.1 CD Installation - Insert the SANavigator CD - Login as root. From the Linux\Redhat directory on the CD, copy the .bin file (e.g. SANav271irh.bin) to your temp directory. - Start the Installer ./temp/SANav271irh.bin or... sh ./temp/SANav271irh.bin - Follow the on-screen instructions. 7.2 Web Download Go to the IBM Support WEB site - http://www.pc.ibm.com/ to access the WEB page. The web site includes the following: - This readme file. - A link to the SANavigator web site - http://www.sanavigator.com/ibm/xseries to allow you to download SANavigator. This will ensure that you are downloading the latest version of SANavigator. In order to download the package, you will need to register. Please have your FAStT Storage Server model number and serial number to complete the registration. 8.0. SNIA HBA library --------------------- 8.1 Support for in-band management using the HBA API Library is not available with the 5.38.1 HBA driver. A later release will provide support. 9.0. INSTALLING SANavigator --------------------------- 9.1 Before you begin, obtain your network information, including the IP address and subnets of SAN switches and servers. 9.2 To install SANavigator on your Linux based computer do the following: - Open a terminal session in the GUI - From the directory where you stored the bin file, do the following at the prompt: sh SANav271irh.bin or ./SANav271irh.bin 4. Wait for the introduction window to open 5. Follow the instructions presented by the Installer Note: If the default directory is chosen, SANavigator will be installed in the /opt directory. Script files are stored in the /usr directory 10.0 Starting the SANavigator Server and Client ------------------------------------------------ 10.1 Once the application has been installed, you can start it. - Open a terminal session from the GUI - From the /usr directory enter the following: sh SANavigator or ./SANavigator This will launch both the Client and the Server. 10.2 To launch only the client open a terminal session. - From the /usr directory enter the following: sh SANavigator_Client or ./SANavigator_Client 10.3 Once SANavigator is launched, it will try to discover the SAN based on the IP address of the server on which it is installed. If the IP address is not available, you will need to provide one. Select New in the Open SAN dialog and enter the IP address of your server. 10.4 In the General tab of the Discovery dialog (Click Discovery--->Setup), select out-of-band. Make sure Discovery is turned on. Please refer to the online help file or the Problem Determination Maps (PD's) for more information. PD's can be found on the IBM Support Web site. 11.0 Uninstalling SANavigator ------------------------------ 11.1 Be sure to Exit the application before you uninstall SANavigator. If other Hosts are currently connected to this Server, exiting SANavigator will disconnect these Hosts. If you do not want to disconnect other Hosts, Exit Client Only. In this case you will not be able to un-install SANavigator until all remote hosts are disconnected. If you have not Exited from SANavigator - that is the Server is still running - end the Server. To end the server enter the following commands: #ps -ef | grep -i "SANavigator" (include quotes) #kill -9 process id The grep command will list the associated SANavigator process id. From the list, select the process id with the greatest value to close the Server (typically the one right before the grep process.) 11.2 Uninstall SANavigator by opening a terminal session in the GUI and entering the following commands from the /usr directory: - sh Uninstall_SANavigator or ./Uninstall_SANavigator Note: Uninstall instructions assume that SANavigator was installed using the default selections. 3. Wait for the introduction window to open 4. Follow the instructions presented by the Uninstaller. 12.0 LIMITATIONS ----------------- 12.1 Discovery 12.1.1 SANavigator defaults to your local subnet for initial discovery. You will need to enter the IP and subnet of the SAN you wish to discover in the Out-of-Band tab of the Discover Setup dialog. 12.1.2 It is more efficient to discover a large subnet by using the broadcast method rather than the sweep or individual IP method. The individual IP method may be faster when discovering a SAN on a subnet that is congested or that has long latencies. 12.1.3 Verify that there is an Ethernet connection to the SANavigator System and all SAN devices (switches and hubs connections are mandatory) before doing a discovery. Otherwise, discovery will show all red icons. 12.1.4 In the Discovery Setup dialog box General Tab, you can clear the current SAN. This will remove any configuration that you may have previously set up. Therefore, MAKE SURE you save your SAN setup prior to clearing it. 12.2 Topology Representation and Display 12.2.1 Changing the color depth of the computer display may cause the window to turn black. This occurs when changing color depth and also when changing from a high resolution to a lower resolution. If your resolution is set at more than 1280 x 1024 pixels, some fields in the Port and LUN Performance dialogs are outside the boundary of the dialog. Increase the size of the dialog manually and they will display properly. 12.2.2 To obtain the best depiction of bridges and routers and the devices connected to them, enter the IP address for each(bridge and router) in the individual addresses table on the Out-of-Band tab of the Discover Setup dialog. Ensure the Ethernet ports of the bridges\routers are connected to the same subnetwork as the switches and associated Hosts. 12.2.3 Delete off line (red) connections and devices from the topology before connecting any new devices to the same port. 12.2.4 Unidentified devices attached to a supported device may display as a Storage or Unknown device. To change the icon to the correct device type, right-click on the device,select "Properties," and then select the correct device type from the drop-down list. 12.2.5 Active speed may not be reported on all FAStT HBA's with device driver level 5.38.1. This will be fixed in the next HBA driver release. 12.2.6 Support for the in-band management using the HBA API Library is not available at this time. A later release will provide support. 12.3 General 12.3.1 In-band Management is not supported 12.3.2 Copy/Paste of information from outside of SANavigator is not supported. You can however, copy/paste within SANavigator (Device List for example). 12.4 Release Notes Please refer to the ReleaseNotes.pdf (portable document format) file in the SANavigator install directory for additional limitations and hints. 13.0 WEB SITES AND SUPPORT PHONE NUMBER ---------------------------------------- 13.1 IBM Support Web Site: http://www.ibm.com/pc/support 13.2 IBM eServer xSeries Marketing Web Site: http://www.ibm.com/pc/us/eserver/xseries/index.html 13.3 If you have any questions or problems about this package go to the following Help Center World Telephone Numbers URL: http://www.ibm.com/planetwide 14.0 TRADEMARKS AND NOTICES ---------------------------- 14.1 The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM SANavigator is a trademark of SANavigator, Inc. Other company, product, and service names may be trademarks or service marks of others. 15.0 Disclaimer ----------------- 15.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 15.2 Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.