*********************************************************************** * * * This diskette contains IBM* Hot Plug PCI System Support Program * * for Microsoft** NT V4.0 * * Device Driver, Support Files, and Supported Hot Plug PCI drivers * * * *********************************************************************** I. What is the IBM PCI Hot Plug Solution? + The IBM PCI Hot Plug solution for Windows NT 4.0 ensures High Availability on PCI Hot Plug-compatible IBM servers. With IBM PCI Hot Plug, you can use: * Hot Add to install and configure a new adapter while the server is running * Hot Swap to replace a faulty standalone or redundant adapter while the system is running * The IBM PCI Hot Plug Applet to monitor the status of Hot Plug PCI slots on your server IBM PCI Hot Plug includes two wizards, IBM PCI Hot Plug and Play and IBM PCI Hot Swap. These wizards provide clear, step-by-step guidance while you are adding or swapping an adapter. -------------------- System Requirements -------------------- IBM PCI Hot Plug systems such as the IBM Netfinity 5500 or IBM Netfinity 7000. To obtain more detailed information about Netfinity servers and products that support PCI Hot-Plug features, visit one or more of the following IBM pages on the World Wide Web: http://www.pc.ibm.com http://www.pc.ibm.com/support http://www.pc.ibm.com/us/compat/hotplug/ ---------------------- Software Requirements ---------------------- * Microsoft Windows NT 4.0 SP3 or later * IBM PCI Hot Plug Package which includes: + Intel DMI agent This agent automatically installs DMI services on your system. + IBM PCI Hot Plug Solution - IBM PCI Hot Plug Applet - IBM PCI Hot Plug systray - IBM PCI Hot Plug and Play Wizard - IBM PCI Hot Swap Wizard * Hot Plug Adapters Software Look for a list of the supported adapters on www.ibm.com/pc/support/netfinity You also can download IBM PCI Hot Plug package from www.ibm.com/pc/support/netfinity. --------------------------------- Adapters Supported for Hot Plug ---------------------------------- You can obtain a list of the supported adapters and download the most current versions of the adapter device drivers and programs from the following IBM pages on the World Wide Web: http://www.pc.ibm.com/support http://www.pc.ibm.com/us/compat/hotplug/ For additional information about future support, contact your IBM marketing representative. II. IBM PCI Hot Plug Installation You must use the following software to provide IBM PCI Hot Plug support for hot plug-capable IBM Netfinity systems. You can download this software from www.ibm.com/pc/support/netfinity. - Intel DMI Agent - IBM PCI Hot Plug Services - IBM Fault Tolerant Device Drivers ---------------------------------- Step 1: Installing Intel DMI agent ----------------------------------- This software will install DMI version 2.0 on your system. You must install the DMI agent before you can install the IBM PCI Hot Plug Services. If DMI is already installed on your system, proceed to Step 2. 1. Download the DMI Agent exe file from the Netfinity Support web page and extract the files onto a diskette. 2. Insert the diskette into the floppy drive. 3. From the Start menu, select Run. 4. Type A:\SETUP.BAT in the Open box. 5. Click OK. The Setup wizard opens. 6. Check both "DMI 2.0 Service Provider" and "DMI 2.0 DCE Client" items. 7. Follow the instructions on the setup wizard until the program is installed. 8. Reboot -------------------------------------------- Step 2: Installing IBM PCI Hot Plug Services -------------------------------------------- 1. Download the IBM PCI Hot Plug Services exe file from the Netfinity Support web page and extract the files onto a diskette. 2. Log in to Windows NT as a user in the Administrator group. 3. Insert the diskette into the floppy drive. 4. From the Start menu, Select Run. 5. Type A:\SETUP.EXE in the Open box. 6. Click OK. The Setup wizard opens. 7. Follow the instructions on the setup wizard until the program is installed. NOTES: * If you have an older version of IBM PCI Hot Plug Services on your system a message box will prompt you to upgrade. Click Yes and the Setup wizard will guide you through the rest of the installation. -------------------------------------------- Step 3:Installing Hot Plug Adapters Software -------------------------------------------- Please read the adapterÆs user manual for specific Hot Plug and Faut Tolerant support. To insure that any of the Hot Plug features work properly, you must install the Hot Plug aware drivers. If you already have an adapter configured on your system make sure that the drivers are Hot Plug aware. In the case of an old version of the driver, those must be removed and replaced with the latest. A reboot will be required. 1. Download the driver .exe file from the web page and extract the files onto a diskette. 2. Place the diskette into the floppy drive. 3. Proceed with the normal upgrade of the adapter drivers. See your Windows NT documentation for information about upgrading drivers. 4. Reboot ------------------------------------------------------- Step 4: Tips to Know before using PCI Hot Plug features ------------------------------------------------------- 1. Hot Plug Aware Drivers To insure that any of the Hot Plug features work properly, you must install the Hot Plug aware drivers. If you already have an adapter configured on your system make sure that the drivers are Hot Plug aware. In the case of an old version of the driver, those must be removed and replaced with the latest. A reboot will be required. 2. Hot Add of an Adapter previously removed When an administrator attempts to Hot-Add a SCSI or RAID adapter on a Hot Plug system on which the adapter has already been installed and removed, the Hot Add will fail. 3. The administrator is strongly advised to mark all SCSI drivers which have no device as "DISABLED" via the Devices Control Applet. This will prevent the driver from being started and allow the Hot Add to proceed normally. 4. MAC address incorrect (all zeros) for Hot Added card After a Hot Add of an NIC Card, the MAC addresses are being returned as all zeros (000000000000). This does not affect the abilities of the adapter. 5. Hot Remove This feature is NOT supported. 6. Best Time to perform PCI Hot Plug action It is highly recommended to perform any of the PCI Hot Plug features during low traffic. 7. Reboot Message After Hot Adding an adapter, the Windows NT applications (Network Applet and SCSI Applet) will ask the user to Reboot. DO NOT REBOOT! IV. Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Subject to IBMÆs valid intellectual property or other legally protectable rights, any functionally equivalent product, program, or service may be used instead of the IBM product, program, or service. The evaluation and verification of operation in conjunction with other products, except those expressly designated by IBM, are the responsibility of the user. IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. ---------------------------- Trademarks and Service Marks ----------------------------- The following terms, denoted by an asterisk (*) in this README, are trademarks or registered trademarks of the IBM Corporation in the United States or other countries: ------------------------------------------ IBM ------------------------------------------ NetFinity ------------------------------------------ ServeRAID ------------------------------------------ The following terms, denoted by a double asterisk (**) in this README, are trademarks of other companies as follows: Trademark: Owner: -------------------------------------------------------------- Windows NT Microsoft, Inc. -------------------------------------------------------------- ------------------------------------- Year 2000 Readiness and Instructions ------------------------------------- This is a Year 2000 Readiness Disclosure. A product is Year 2000 Ready if the product, when used in accordance with its associated documentation, is capable of correctly processing, providing and/or receiving date data within and between the 20th and 21st centuries, provided all other products (for example, software, hardware, and firmware) used with the product properly exchange date data with it. This IBM PC hardware product has been designed to process four-digit date information correctly within and between the 20th and 21st centuries. If your IBM computer is on when the century changes, you should turn it off and then back on again once, or restart the operating system, to ensure that the internal clock resets itself for the new century. This IBM PC product cannot prevent errors that might occur if software you use or exchange data with is not ready for the Year 2000. IBM software that comes with this product is Year 2000 Ready. However, software from other companies might come with this IBM PC product. IBM cannot take responsibility for the readiness of that software. You should contact the software developers directly if you wish to verify readiness, understand limitations, or look for any software updates. To learn more about IBM PC products and the Year 2000, visit our Web site at http://www.pc.ibm.com/year2000. The information and tools there can help you with your Year 2000 transition plan, especially if you have multiple IBM PCs. IBM encourages you to check periodically for updated information. THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.  the software developers directly if you wish to verify readiness, understand limitations, or look for any software updates. To learn more about IBM PC products and the Year 2000, visit our Web site at http://www.pc.ibm.com/year2000. The information and tools there can help you with your Year 2000 transition plan, especially if you have multiple IBM PCs. IBM encourages you to check periodically for updated information. THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP S