Directions to flash AHA-2940UW with v2.20 BIOS The UWFLASH.EXE will self-extract to build a DOS bootable diskette image. The image file is automated to preform the PCI 2940UW 2.20 firmware update automatically. !!! WARNING !!! !!! PLEASE READ !!! !!! WARNING!!! DO NOT run this program from a hard disk. DO NOT run this program from a DOS Window, or a DOS Shell. DO NOT run this program in 32-bit mode, from NT. !!! WARNING !!! !!! PLEASE READ !!! !!! WARNING!!! CAUTION: This BIOS update is NOT to be used for updating motherboard embedded SCSI controllers. If you run this utility on a system containing both imbedded and a pci uw card you will receive a message at the end of the process that "Status Code: 13 (Unable to flash some of the host adapters) WARNING: USING THE FLASH4.EXE PROGRAM MANUALLY, WITHOUT THE BATCH FILES PROVIDED CAN RENDER YOUR CONTROLLER INOPERABLE. The FLASH4.EXE program contains optional switches for a large number of controllers. Some switches, especially the -1mb is reserved for a select group of controllers and must NOT BE USED. ***********************************************************************