IBM TrackPoint Keyboard Support for Windows and OS/2
====================================================
Version:  1.00k


This diskette (or folder) contains the software support for the IBM
PS/2 TrackPoint Keyboard on Windows 95, Windows NT version 4.0, and
OS/2 Warp version 4.0.

This software is intended for use with the IBM PS/2 TrackPoint
Keyboard, version 4.0 or later.  For earlier versions, no special
software is needed.


Installation for Windows 95/Windows NT 4.0
------------------------------------------
  1. Start Windows 95/Windows NT 4.0
  2. Insert the TrackPoint Driver Diskette into the diskette drive.
  3. On the Taskbar, click the Start button.
  4. Select Settings, Control Panel
  5. Double Click on the Mouse icon.
  6. Select the General tab at the top of the Mouse Properties panel.
  7. Click on the Change button.
  8. Click on the Have Disk button.
  9. Click on the OK button.
 10. Select IBM PS/2 TrackPoint from the list.
 11. Click on the OK button.
 12. Click on the Close button on the Mouse Properties panel.
 13. Restart your computer so the new settings will take effect.

Installation for Windows 98
---------------------------
  1. Start Windows 98.
  2. Insert the TrackPoint Driver Diskette into the diskette drive.
  3. Click on Start.
  4. Move the cursor to Settings;then click on Control Panel.
  5. Double Click on the System icon.
  6. Click on Device Manager tab at the top of the "System Properties" window.
  7. Double-click on Mouse.
  8. Double-click on PS/2 Mouse Port or IBM PS/2 TrackPoint.
  9. Click on the Driver tab.
 10. Click on the Update Driver... button.
 11. Click on Next.
 12. Click on Display a list of all the drivers in a specific location.
 13. Click on Next.
 14. Click on Have Disk.
 15. Click on OK.
 16. Click on IBM PS/2 TrackPoint in the list.
 17. Click on Next.
 18. If "Update Driver Warning" window appears, click on Yes.
 19. Click on Next.
 20. Click on Finish in the "Update Device Driver Wizard" window.
 21. Restart your computer so the new settings will take effect.

Installation for OS/2
---------------------
  1. Start OS/2.
  2. Insert the diskette labelled TrackPoint Driver Diskette for OS/2
        into the diskette drive.
  3. Install the TrackPoint Support files.
        - Open an OS/2 command prompt.
        - Type A:\os2\install and press Enter.
        - Follow the instructions on the screen.
           If asked to choose a directory for installing the files,
           select the drive that contains OS/2.
  4. Restart your computer so the changes will take effect.