MouseSuite README File ScrollPoint III/Pro/Optical Mouse Driver for Windows 2000/XP (c) Copyright Primax Electronics Ltd, 1998-2001. All Rights Reserved. TABLE OF CONTENTS ================= 1. Before Installation 2. Installation Guide 3. Uninstallation 1. Before Installation ----------------------- If you have installed special mouse drivers or mouse software on your system, other than the Standard PS/2 Port Mouse, Microsoft PS/2 Port Mouse, or IBM PS/2 TrackPoint drivers, please uninstall them before installing the ScrollPoint III/Pro/Optical mouse drivers. Note: If your mouse interface is USB, you will need Windows 98/ME/2000/XP. There is no USB support in Windows NT 4.0 or Windows 95. 2. Installation Guide ---------------------- Running setup.exe on this diskette is the fastest way to install this software. For unattended installation, you can use parameter /S for silence install and /NR to specify no reboot. For example: setup /s (silent installation, will reboot) setup /s /nr (silent installation, will NOT reboot) setup /s /TYPE:PS2 (PS/2 Mouse Preload installation) setup /s /TYPE:USB (USB Mouse Preload installation) You may install the mouse driver manually as follows: - Windows 2000/XP [USB] 1. Click on "Start " button and point "Settings". 2. Click on "Control Panel". 3. Double click on "System" icon and display "System Properties". 4. In the "Hardware" tab, Click the "Device Manager..." button. 5. In the "Device Manager" Window, double click on the "Human Interface Devices" icon in the device list. 6. Select the proper "USB Human Interface Device" and click the "Properties" button. 7. A property page about this device will appear, select the "Driver" tab and then click the "Update Driver..." button. 8. Follow the instruction on the screen to complete the driver update procedure. - Windows 2000/XP [PS/2] 1. Click on "Start " button and point "Settings". 2. Click on "Control Panel". 3. Double click on "Mouse" icon and display "Mouse Properties". 4. Click on "Hardware" Tab in the "Mouse Properties" dialog box. 5. Click on "Properties" button and display "Microsoft PS/2 Mouse Properties". 6. Click on "Driver" Tab in the "Microsoft PS/2 Mouse Properties" dialog box. 7. Click on "Update Driver..." button and display "Upgrade Device Driver Wizard". 8. Follow the instruction on the screen to complete the driver update procedure. 3. Uninstallation ------------------ - Windows 2000/XP 1. In Control Panel, open "Add/Remove Programs". 2. In Install/Uninstall tab, select this software from the list and click on the "Add/Remove" button. 3. Follow the instruction on the screen to complete the uninstallation procedure.