** WINNT 4.0 ADSL Driver and Software Installation Instructions ** -------------------------------------------------------------------------------- Asymmetric Digital Subscriber Line (ADSL) is a high speed Internet access technology that works over a regular twisted pair telephone line. ADSL coexists with the voice band, allowing the customer to browse the web and talk on the phone at the same time. -------------------------------------------------------------------------------- Please note that this set of drivers supports RFC 2364. Please check with your ISP to find out what protocol they support. Driver Version: 2.6.6.0 Software Version: 2.10.27.0 (1) Double click on 'nt4_wan.exe'. Driver and application files will be extracted to 'c:\temp\ADSL'. (2) Right click on 'Network Neighborhood', and select 'Properties'. (3) Click on the 'Adapters' tab. If you have not previously installed an IBM ADSL adapter, proceed to step (5). (4) Select the current ADSL adapter entry and click 'Remove'. (5) Click 'Add...'. (6) Click 'Have Disk...'. (7) NT will ask for the driver location directory. (8) Enter 'c:\temp\ADSL'. (9) NT will prompt you again to find the drivers - point again to 'c:\temp\ADSL'. (10) Double click on 'TI3000PM.EXE', also found in 'c:\temp\ADSL' to install the ADSL Monitor Software.