Windows 2000 1. When prompted to Extract to:, click Extract, or enter the path where you want the folder to be extracted and then click Extract. 2. When asked "Create 'C:\BTwindows2k' directory?", click Yes. 3. Click Start, then click Run, and then type in C:\BTwindows2k\Setup.exe, or x:\Setup.exe, where x: is path where the file was extracted to and then click OK. 4. Follow the instructions on your screen. At the end of the process, indicate that you want to restart your computer again. The software installation is complete. 5. After the software is installed, insert the PC Card into either of the PC Card slots (PCMCIA slots) on your computer. The Found New Hardware Wizard window will appear. 6. Click Next. 7. Select the "Search for a suitable driver for my device. (recommended)" option and click Next. 8. Check"Specify a location:" and uncheck any other option. Click Next. 9. Type in c:\BTwindows2k, or the path where the file was extracted to, and then click OK. 10. Click Next. 11. Once the driver is installed, clik Finish. 12. You will go trhough the Found New Hardware Wizard . Repeats steps 6 to 10 until the last driver is installed. Note: When the Digital Signature Not Found comes up, clikc Yes to continue the installation. 13. When the last device driver has completed installation, click Start, then click Shut Down. 14. Click Restart, then click OK to restart your computer. After your computer restarts, the device driver installation is complete. Note: The Help Files are not included within this files. You can download them from our web site. Note: The Beginner's Guide and the User's Guide are not included within this files. You can download them from our web site.