Drivers / Client tools for IBM High Rate Wireless LAN PC Card (P/N 09N9863, 09N9904, and 09N9906) for Windows 98. File Contents: This self extracting EXE file contains the drivers, client tools, and firmware for the IBM High Rate Wireless LAN PC Card. Installation instructions 1. Using Windows Explorer, Find and Double click the win98wl.exe file that was downloaded, a PKSFX Extraction window will appear. Click the "Extract" button. NOTE: (If a window "Create C:\wlan directory ?" appears, Click yes.) This will unzip the contents to this folder; C:\WLAN. If you need to install the client tools: 1) Click "Start" > "RUN" > in Box provided,(type "c:\wlan\setup.exe") 2) Click "OK" Installation of the client software should start. Follow the instructions presented on the screen. If you need to install the card / drivers: Note: Before installing the Card/Drivers, ensure that the Client Software has been installed Properly. 1) Insert IBM High Rate Wireless LAN PC Card into Laptop. 2) When card is detected, Follow installation procedure presented on the screen. NOTE: When asked for manufacturer disk, point installation at "C:\wlan" directory. If you have any further questions. You can download complete documentation at http://www.pc.ibm.com/support When the driver installation is complete, you must enter a network name. Please see your system administrator for your network name. Open the Client manager window, click edit profile button and enter the network name in the box. If you need to update the firmware: 1) Click "Start" > "RUN" > in Box provided,(type "c:\wlan\Wsu10616.exe") 2) Click "OK" Installation of the Firmware should start. Follow the instructions presented on the scr