. . XIRCOM CREDITCARD ETHERNET 10/100 Adapter . XIRCOM REALPORT ETHERNET 10/100 ADAPTER . Software Release Version 1.75 August 14, 1998 ============================================================================= Thank you for purchasing your Xircom CreditCard Ethernet 10/100 or RealPort Ethernet 10/100 Adapter. The drivers in this software release are compatible with the following Xircom Ethernet 10/100 Adapters: Product Name Model Number ------------------------------------------------------------ CreditCard Ethernet 10/100-Upgradable CE3-10BT,CE3-10BC CreditCard Ethernet 10/100-Ready CE3B-100BTX RealPort Ethernet 10/100 RE-100BTX Xircom has done everything to ensure that our adapters are compatible with the widest range of notebook and laptop PCs possible. As a company, we are committed to customer satisfaction and timely response to the needs and concerns of our customers. If you have compatibility issues related to your specific environment, or require additional information, please refer to your Xircom User's Guide. Remember to register your Xircom adapter to receive information about future software upgrades and new products. CONTENTS ======== 1) Xircom CreditCard Ethernet 10/100 Characteristics 2) Xircom RealPort Ethernet 10/100 Characteristics 3) Release Notes/Known Limitations 4) SNMP Agent 5) Xircom Customer Support 1) XIRCOM CREDITCARD ETHERNET 10/100 CHARACTERISTICS ================================================= This release of the Xircom CreditCard Ethernet 10/100 has the following characteristics: -Full suite of network driver support - Allows 10Mbps or 100Mbps connection across a wide range of operating systems and networks. Native 32-bit NDIS3 and NDIS4 driver support for Windows 95, Windows 98 and Windows NT included. -Windows 3.x installation program - Automatically installs ODI and NDIS2 drivers in DOS and Windows 3.X. -Auto-negotiates 10Mbps or 100Mbps network (models supporting 10Mbps and 100Mbps network speeds). -SNMP network management agent included - Allows portable PC to be managed using SNMP-based network management software. -HotSwap support - Makes it easy to replace one card with another while power is on; or to gracefully disconnect from the network. -Models available: RE-100BTX Supports both 10Base-T and 100Base-TX with an integrated RJ45 connector CE3B-100BTX (100Mbps Ready) Supports both 10Base-T and 100Base-TX with a single cable connector CE3-10BT (100Mbps Upgradable) Supports 10Base-T networks CE3-10BC (100Mbps Upgradable) Supports 10Base-T, 10Base-2 networks CE3CBL-100BTX (100Mbps Upgrade) Cable upgrade that provides 10Base-T/100Base-TX support for CE3-10BT and CE3-10BC models 2) XIRCOM REALPORT ETHERNET 10/100 CHARACTERISTICS =============================================== In addition to the characteristics described in Section 1, the RealPort Ethernet 10/100 Adapter includes: -An integrated 10Base-T and 100Base-TX connector. There are no cables or pop-out jacks to loose or break. 3) RELEASE NOTES/KNOWN LIMITATIONS =============================== This release of the CreditCard/RealPort Ethernet 10/100 driver software version 1.75 contains an updated suite of drivers which improves compatibility and functionality. New in the 1.7X Releases ------------------------ -Enhanced support for auto-negotiation with CE3, CE3B and RE-100. -Support for SystemSoft CardWizard for Windows NT 4.0. Supported Environments ---------------------- With this release, the following environments are supported: -NDIS3 Driver for Microsoft Windows NT (Ver. 3.50, 3.51, 4.0) and Windows 95 (CE3.SYS) -NDIS4 Driver for Microsoft Windows 95 OSR2, Windows 98 and Windows NT 4.0 (CE3N4.SYS) -DOS ODI Driver (CE3ODI.COM) -DOS NDIS2 Driver (CE3NDIS.EXE) -NDIS2 Driver for OS/2 (CE3NDIS.OS2) -ODI Driver for OS/2 (CE3ODI.OS2) -NetWare Server Driver (CE3ODI.LAN) -Diagnostic test program (CE3TEST.EXE) -Packet Driver (CE3PD.COM) is available for download from the Xircom web site, www.xircom.com Known Limitations ----------------- -Full-duplex operation is only supported at 10Mbps. Full-duplex is not supported at 100Mpbs. This has no effect on performance at 100Mbps. If the LineSpeed keyword is set to 100Mpbs and the LineMode keyword is set to full-duplex, the LineMode keyword will be ignored. Full-duplex at 10Mbps is only available when the adapter is connected to a full-duplex capable switch or hub. -In order to connect to a 100Base-TX Ethernet network, a Category 5 unshielded twisted pair (UTP) network cable terminating in a male RJ-45 connector must be connected to a 100Mbps hub or switch. Check with your LAN Administrator if you are not certain of your network speed and infrastructure. -The CE3 and in some cases the CE3B are not capable of negotiating to 10Mbps full-duplex mode. On these adapters, in order to operate in full-duplex mode, the LineSpeed keyword must be set to 10Mbps and the LineMode keyword must be set to Full Duplex. The Cable Type keyword can be set to Auto Detect or 10BT/100BTX. The corresponding port on the attached hub or switch should also be set to 10Mbps full-duplex. -The CableType keyword has precedence over the LineSpeed and LineMode keywords. If CableType is set to 10B2 (Coax), the LineSpeed and LineMode settings will be ignored. The adapter will be configured for 10Mbps, half-duplex. -If the CableType keyword is set to Auto Detect and a LAN cable is not attached to the adapter when the machine boots, the adapter will be configured for Coax, 10Mbps, half-duplex (this situation is applicable to a CE3 with the 10BT LAN cable only). If you need to hot attach a twisted pair cable after the adapter is started, set the CableType keyword to twisted pair (TP). -If a 10BT or 10B2 LAN Cable is attached to a CE3 adapter, the LineSpeed setting will be ignored (i.e. the adapter will operate at 10Mbps even if LineSpeed is set to 100Mbps). -A 10BT LAN Cable, when attached to a 100Mbps only hub, will report link (at the LED) but will fail to operate correctly (i.e. will be unable to transmit and receive data). -It is normal to see the link LED at both the LAN Cable and the hub come on, then off, and then on again as the adapter attempts to establish link. This situation will only occur with the CE3 (with the 10/100 LAN Cable) and early versions of the CE3B. Additionally, this only occurs if the network cable is attached after the host machine is powered-on or the network cable is removed and then reinserted after power-up. -If the network cable is attached after host power-up, the user may see the collision LED on a 10Mbps hub go on for a short period of time. This situation is applicable only to the CE3 (with the 10/100 LAN Cable) and early versions of the CE3B. -If "Link Integrity" is disabled, the LineSpeed and LineMode settings will be ignored (i.e. the adapter will operate at 10Mbps, half-duplex). -Xircom LAN cables are not hot swappable. If the Xircom LAN cable is changed, the system must be rebooted. For example, if the Xircom 10BT cable is replaced with the Xircom 10/100BTX LAN cable, the system must be rebooted. 4) SNMP AGENT ========== Xircom provides SNMP support for the CreditCard and RealPort Ethernet 10/100 Adapters. If you wish to use the agent under Windows 95, follow these instructions: ------------------------------------------------------------------------- 1. First install the Microsoft SNMP agent: For Win95: Control panel -> Network -> Add -> Service -> either: Microsoft -> SNMP Agent or: Have disk -> WIN95CD\\admin\nettools\snmp 2. Then install the Xircom Extension agent: Control panel -> Network -> Add -> Service -> Have disk -> 3. Insert the Xircom Windows 3.X Installation Disk Then select A:\ Select: Xircom SNMP extension agent -> OK To use the agent under Windows NT, follow these instructions: ------------------------------------------------------------- 1. First ensure that the NT network has been installed and configured with: -NWLINK IPX/SPX; -TCP/IP (with SNMP Service); 2. For Windows NT: Main -> Control panel -> Network -> Add Software -> 3. Select "Other" from the Add Network Software menu, click on "continue" 4. Insert the Xircom 3.X Installation Disk and click OK 5. The "Xircom SNMP Mobile Extension Agent" appears in the Select OEM Option window 6. Click OK and complete the installation 7. Reboot 5) XIRCOM CUSTOMER SUPPORT ======================= To obtain customer support for your Xircom product, please call or send a facsimile to the appropriate number listed below. Access the Xircom TechLine quick-search database of problem solutions at up to 14400 bps, No parity, 8 data bits, 1 stop bit (N-8-1). Use ANSI for your terminal emulation (you must have ANSI.SYS loaded on your system to use the Xircom KnowledgeLine). Access the Xircom INFOSYS BBS at up to 14400 bps (33600 in the U.S.), No parity, 8 data bits, 1 stop bit (N-8-1). Use ANSI, TTY, or NONE for your terminal emulation as the Xircom BBS PCs do not support DEC VT-type terminal emulations. XIRCOM CORPORATE North and South America ======================== -------------------------------------------- Xircom, Inc. Sales Support ............... (800) 438-4526 Corporate Headquarters Sales Support ............... (805) 376-9300 2300 Corporate Center Dr. Customer Support ............ (805) 376-9200 Thousand Oaks, CA 91320 24-Hr Documents-by-Fax ...... (800) 775-0400 . 24-Hr Documents-by-Fax ...... (805) 376-9020 . 24-Hr Fax - Corporate ....... (805) 376-9311 Shipping Address: 24-Hr Fax - Sales Support ... (805) 376-9220 2101 Corporate Center Dr. 24-Hr Fax - Customer Support (805) 376-9100 Thousand Oaks, CA 91320 24-Hr Data Lines - BBS ...... (805) 376-9130 . 24-Hr Internet E-mail ........ cs@xircom.com . World Wide Web ....... http://www.xircom.com . HOURS (Sales): 8:00 am to 5:00 pm, Mon-Fri . HOURS (Support): 6:00 am to 5:00 pm, Mon-Fri XIRCOM EUROPE Europe, Middle East, and Africa ======================== ---------------------------------------------- Xircom Europe N.V. Sales Support ............. +32/(0)3 450.08.11 King Square 24-Hr Documents-by-Fax .... +32/(0)3 450.08.00 Veldkant 39 24-Hr Fax ................. +32/(0) 70 233 306 2550 Kontich, Belgium 24-Hr Data Lines - BBS .... +32/(0) 70 233 163 . Customer Support Telephone Numbers . Native English............. +32/(0) 70 233 307 . Native German.............. +32/(0) 70 233 850 . Native French.............. +32/(0) 70 233 851 . Native Dutch............... +32/(0) 70 233 852 . TechLine On Line........... +32/(0) 70 233 711 . 24-Hr Internet E-mail ...... eurots@xircom.com . 24-Hr World Wide Web ... http://www.xircom.com . HOURS (Sales): 9:00 to 17:00, Mon-Thu; 9:00 to 16:00, Fri . HOURS (Support): 9:00 to 18:00, Mon-Fri XIRCOM ASIA PACIFIC Asia Pacific ======================== ---------------------------------------------- Xircom Asia Pacific (Pte) Ltd Sales.......................+65 323 1511 76 Shenton Way Customer Support............+65 323 3404 Unit #06-01 24-Hr Fax ..................+65 224 3313 Singapore 079119 24-Hr Data Lines - BBS..... +65 323 0455 . World Wide Web.... http://www.xircom.com . HOURS: 9:00 a.m. to 5:00 p.m., Mon-Thur . 9:00 a.m. to 4:00 p.m., Fri ----------------------------------------------------------------------------- Thank you for making Xircom a part of your network. Xircom acknowledges all tradenames and trademarks used in this document as the property of their respective owners.