Flash BIOS update - Flash from Operating System version for IBM(R) Aptiva(R) 2194 and 2197 systems using SiS 630 chipset for IBM(R) NetVista(R) 2194 and 2197 systems using SiS 630 chipset version P5KT22A Installation README This package updates the basic input/output system (BIOS) on IBM Aptiva and IBM NetVista 2194 and 2197 systems using the SiS 630 chipset. BIOS is programming that controls low-level hardware operations, including interactions with diskette drives, hard disk drives, and the keyboard. The BIOS is stored on a chip. Your computer uses flash BIOS, which can be updated through a program on a flash diskette so that you do not have to replace the BIOS chip to update the BIOS. Note: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS. Print this file so that you can refer to it during the installation. Downloading the update ---------------------- 1. Click the file link to download the file from the web page. 2. When prompted, select a drive and directory in which to save the downloaded file. Extracting the update --------------------- 1. Click Start, select Find or Search, then click Files and Folders. 2. Type p5ja22usa.exe in the search field, then click Find Now. This will locate the p5ja22usa.exe file you just downloaded. 3. Double-click the p5ja22usa.exe icon. 4. Click Next. Read the license agreement 5. Click I Agree. The installation folder should be C:\IBMTOOLS\FLASH\P5JA22US. 6. Click Finish. You will be prompted with a message stating "The specified output folder does not exist. Create it?" 7. Click Yes. You will be prompted with a message stating "The package has been delivered successfully." 8. Click OK. Installing the update --------------------- 1. Close all open applications. 2. Click Start, then click Run. 3. Type C:\IBMTOOLS\FLASH\P5JA22US\SETUP.EXE, then click OK. The destination directory should be C:\FlashOS\. 4. Click Next. You will be prompted with a message stating "Setup has finished copying files to your computer. Before you can use the program, you must restart Windows or your computer. Choose one of the following options and click OK to finish Setup." 5. Select Yes, I want to restart my computer now. 6. Click OK. Wait for Windows to restart. 7. Click Click Start, then click Run. 8. Type C:\IBMTOOLS\FLASH\P5JA22US\QUICKFLASH.EXE. 9. Click OK. 10. Select Client Mode. 11. Click Flash System. Wait until you see a message stating "BIOS Flash Update Successful! You must reboot your system for the changes to take effect." 12. Click OK. 13. Click File, then click Exit. 14. Shutdown and restart your system for the changes to take effect. Testing for successful installation ----------------------------------- 1. Click Start, highlight Programs, highlight Access IBM, then click IBM System Information. If IBM System Information is not installed on your system, install it using your Software Selections CD. 2. Verify that the BIOS version is IBM BIOS ver P5JA22.0. Flash Changes ------------- P5JTxxA is the flash diskette level. P5KTxxA is the binary image level. (BIOS) NOTE: All changes carry forward. That is, if a change is added in 01, it is also in 02, 03 etc. changes for P5KT/P5JT13A - Initial Release of 2194-69C, 2194-6AC, 2194-69W, 2194-6AW, 2194-34A, 2194-47A, 2194-48A, 2194-17A, 2194-18A, 2197-49L, 2197-4CM, 2197-4DM, 2197-51M, 2197-53M, 2197-49N, 2197-49J, 2197-55C, 2197-55W, 2197-55V, 2197-69V, 2197-6AV, 2197-16A, 2197-49Q, 2197-43Q, 2197-4AQ, 2197-43T, 2197-49T, 2197-4AT FLASH. changes for P5KT/P5JT18A - Support for BIOS flash under Windows 98/NT/ME/2000. - Support Legacy USB FDD and mouse. - Fix for composed USB keyboard. - Fix for PS2 keyboard and mouse plug error. - Fix keyboard LEDs turn off after machine powers off. - Fix PS2 mouse under Windows2000 if legacy USB mouse set to disable. - Fix phantom FDD icon appeared in MyComputer. - Fix POST hang on HDD detecting if two CDROM were attached. - Initial Release of 2194-6EA, 2194-7DA, 2194-71A, 2194-81A, 2194-8DW, 2194-8EA, 2194-9DW, 2194-9EA, 2194-9FC, 2197-6DJ, 2197-6GT, 2197-6HJ, 2197-6JJ, 2197-7FQ, 2197-7GC, 2197-7GV, 2197-7GW, 2197-7GT, 2197-82C, 2197-82V, 2197-82W, 2197-8DC, 2197-8DV, 2197-9DV, 2197-11Q, 2197-12T FLASH. changes for P5KT/P5JT19A - Enables UDMA functions for Win2000. changes for P5KT/P5JT22A - Add Flash Utility item. Trademarks ---------- IBM and NetVista are trademarks of the IBM Corporation in the United States, other countries, or both. Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. (C) Copyright IBM Corporation 2002. All rights reserved.