IBM ThinkPad                                         November 20, 2001
Video Features(SavageIX8) for Windows NT 4.0

Version 7.20.35
======================================================================


What This Package Does
----------------------
This package provides the display driver for Windows NT 4.0 users.

This package enables or updates the display function of the following
ThinkPad computers:
  - ThinkPad T20/T21/T22
  - ThinkPad A22e Pentium model

To determine if you should update the display driver, refer to the
"Summary of Changes" section.

To update the display driver, refer to the "Installation Instructions"
section.

NOTE:
  This driver cannot be installed without Windows NT 4.0 Service Pack
  3 or later. Install the Service Pack first, then install this
  driver to the system.


Released Versions
-----------------
Version 7.10.15  Initial release
Version 7.10.22  Minor fix
Version 7.11.11  Problem fix and ThinkPad T21 support
Version 7.11.13  Problem fix
Version 7.11.18  Problem fix
Version 7.20.19  Problem fix
Version 7.20.31  Problem fixes and support ThinkPad A22e
Version 7.20.33  Problem fix
Version 7.20.34  Problem fix
Version 7.20.35  Problem fix


Summary of Changes
------------------
Where: <n.nn>  Package version (for example, 1.00 means Version 1.00)
       (New)   New function or enhancement
       (Fix)   Correction to existing function

<7.10.20>
-(Fix) Remove the Flicker Filter from slide bar.

<7.10.22>
-(Fix) The video Help information was updated.

<7.11.11>
-(New) Support for ThinkPad T21.
-(Fix) The screen will not be updated at resume if hibernating
       at the logon screen.
-(Fix) User intervention is required during the unattended
       installation of German Windows NT4.
-(Fix) PAL TV is out of sync. or flickering with 640x480 mode
       (on T21 model only).
-(Fix) CRT color will be wrong at resume if hibernating with
       a simultaneous display (SXGA+ and CRT).

<7.11.13>
-(Fix) OpenGL applications do not work when logging in as user mode.
-(Fix) The screen will not be updated at resume if hibernating
       at the logon screen on the system where NT4 is installed by
       unattended inf install.

<7.11.18>
-(Fix) Horizontal noise appears on the desktop on SXGA+ panel model
       only while playback video clip files on simultaneous display
       LCD+CRT.

<7.20.19>
-(Fix) System hangs up with MoldFlow Part Adviser.
-(Fix) Remove VPM version information from S3DuoVue in display
       properties.
-(New) Improve OpenGL ICD driver performance.
-(Fix) 3D object is behind horizontal grid plane with
       ABB RobotStudio.

<7.20.31>
-(Fix) System will slow down or hang when resuming from suspend while
       a OpenGL screen saver is running.

<7.20.33>
-(Fix) LCD+CRT display setting by user is changed to LCD only if user
       boots up then performs a shutdown at least once with LCD only 
       (no CRT attached).

<7.20.34>
-(Fix) Blackout/system hang occurs with Appian video card in docked
       configuration.

<7.20.35>
-(Fix) System BIOS is not updated when flash update is done without
       floppy diskette with ver 7.20.34


Installation instructions
-------------------------
 1. Start Windows NT 4.0 and logon with administrative privileges.
 2. Extract the video drivers for Windows NT to the hard disk drive.
 3. Click Start, then click Run.
 4. In the Run dialog window, type C:\DRIVERS\WNT\DISPLAY\SETUP.EXE
    to install the video driver. Click the OK button to start the
    installation process. If you extracted the files to a different
    location, specify that location instead.
 5. Following the instructions on the screen.

To uninstall the S3 driver (and utilities, if installed):
 1. Click Start, point to Settings, then click Control Panel.
 2. Double-click the Add/Remove Programs icon.
 3. Select SavageIX in the listbox.
 4. Click the Add/Remove button to remove the display driver.
    The utilities should be removed as well if they were installed
    with the driver.
   If necessary, the Uninstall procedure will reset the system to VGA.


Determining which version is installed
--------------------------------------
 1. Click Start, point to Settings, then click Control Panel.
 2. Double-click the Display icon.
 3. Select the S3duovue tab.
 4. Click the Information button to check the version information,
    for example 4.1024.720.0035.


Trademarks
----------
  * IBM and ThinkPad are registered trademarks of IBM Corporation.
  * Windows and Windows NT are registered trademarks of Microsoft Corporation.

  Other company, product, and service names may be registered
  trademarks, trademarks or service marks of others.