IBM ThinkPad 390E, 390X                                   March 31, 2000
Configuration Utility for Windows NT 4.0

Version 1.02
========================================================================


What This Package Does
----------------------
This package provides the following utility programs for Windows NT 4.0
users:

 - ThinkPad Configuration program
 - Fuel-Gauge program
   Notice for ThinkPad 390E users: Previously, the Fuel Gauge program
     was provided as a separate package. Now, it is included with this
     Configuration Utility. Do not try to install any previous versions
     of the fuel gauge program after updating to this Configuration
     Utility.

This release supports the following ThinkPad systems:
  - ThinkPad 390E, 390X

To determine if you have to update the utility programs or not, refer to
the "Summary of Changes" section.

To update the utility programs, refer to the "Installation Guide" section.


Released Versions
-----------------
Version 0.98     Initial release
Version 0.99     A problem fix
Version 1.02     Support for ThinkPad 390E, function enhancement of
                 Fuel Gauge program and problem fixes

Summary of Changes
------------------
Where: <n.nn>  Package version
                 (for example, 1.00 means Version 1.00)
       (New)   New function or enhancement
       (Fix)   Correction to existing function

<0.98>
 - (New) Support for ThinkPad 390X

<0.99>
 - (Fix) Shutdown problem after installing UMS (Universal Management
         Services)

<1.02>
 - (New) Support for ThinkPad 390E.
         (Note for ThinkPad 390E users: Previously the Fuel Gauge program
          was provided separately.  Now it is included in this release of
          the Configuration Utility.  Do not install any previous versions
          of the ThinkPad 390E Fuel Gauge program.)
 - (New) The Fuel Gauge program has been improved to:
         - show a more detail level of charge information, and to
         - show charge/discharge icons in the system tray.
 - (Fix) When logged on as a User, not as an Administrator, the Fuel Gauge
         program would not start.
 - (Fix) ThinkPad 390E only - When logged on as a User, not as an
         Administrator, clicking on the System Information button in the
         ThinkPad Configuration program, would give a "DMI Table not found"
         error message instead of showing the BIOS information.


Installation Guide
------------------
Notes:
- To determine if you have to update the Utility program or not, please
  refer to the "Summary of Changes" section.

For ThinkPad 390E users:
- Before installing this package, you must uninstall the Configuration
  Utility program and if installed, the original, older Fuel Gauge program

For ThinkPad 390X users:
- Before installing this package, you must uninstall the old
  Configuration Utility program.


HOW TO UNINSTALL THE PROGRAMS:
 1. Start Windows NT 4.0 and logon with administrative privilege.
 2. Click on 'Start' -> 'Settings' ->' Control Panel'
 3. Double click on the 'Add/Remove Programs' icon.
 4. Click on the "Configuration Utility" so that it is highlighted.
 5. Click on the 'Add/Remove' button add follow the prompts on the screen.
 6. For ThinkPad 390E users, if you find "Fuel Gauge" listed, select it so
    that it becomes highlighted, click on the 'Add/Remove' button and
    follow the prompts on the screen.
 7. Close all windows, then shut down and restart the computer.


HOW TO INSTALL THE DRIVER:
 1. Start Windows NT 4.0 and logon with administrative privilege.
 2. Extract this package to the hard disk.
 3. Click on 'Start' then click on 'Run...'
 4. In the Run dialog window, type "C:\DRIVERS\WNT\UTILITY\SETUP" to
    install the Configuration Utility. Click OK to start the installation
    process. If you extracted the files to a different location, specify
    that location instead.
 5. Follow the instructions on the screen.
 6. When the installation is completed, shutdown and restart the computer.


HOW TO DETERMINE WHAT VERSION IS INSTALLED
 1. Start Windows NT 4.0.
 2. Click on 'Start' -> 'Find' -> 'Files or Folders...'.
 3. Click on the 'Name & Location' tab.
 4. In the 'Named:' field, type in "thinkpad.exe".
 5. In the 'Look in:' field, specify "Local Hard drives (C:,D:)".
 6. Click on the 'Find Now' button.

 Windows will now search your hard drive for thinkpad.exe.  If the file
 is not found, then the Configuration Utility is not installed on your
 system.

 7. In the 'Found' part of the window, right click on "thinkpad.exe"
    located in "C:\Program Files\Configuration Utility" and select
    "Properties".
 8. Click on the "Version" tab. File version information will be
    displayed.


Trademarks
----------
  * IBM and ThinkPad are registered trademarks of IBM Corporation.
  * Windows is a registered trademark of Microsoft Corporation.

  Other company, product, and service names may be registered trademarks,
  trademarks or service marks of others.