IBM ThinkPad                                            September 11,2000
Utility Driver II for Windows 95/98/Me

Version 1.02
=========================================================================

What These Packages Do
-----------------------
The Utility Driver Disk II for Windows 95/98/Me provide the following 
utility programs for Windows 95, Windows 98 and Windows Me with APM:
 - ThinkPad UltraBase Hot-Attach Driver

Supported Models
----------------
   - ThinkPad 570/570E
   - ThinkPad i Series 1157(*1)
      *1: Supports Windows 98 only.

Released Versions
-----------------
Version 1.00     Initial release
Version 1.01     Support for new models and fix for a problem
Version 1.02     Support for new OS (Windows Me)

Summary of Changed or Fixed Items
---------------------------------
Where: <n.nn>  Package version (for example, 1.00 means Version 1.00)
       (New)   New function or enhancement
       (Fix)   Correction to existing function
       (Restrictions)  Remaining restrictions

<1.00> IMUX03US
 - (New) Support for ThinkPad 570.

<1.01> IUUX02US
 - (New) Support for ThinkPad 570E.
 - (New) Add ThinkPad i Series 1157 into the support list.
 - (Fix) System would freeze when User pressed CTRL+ALT+DEL on
         "Close Program" Window under Windows 98

<1.02> IUUX04US
 - (New) Support Windows Me (APM Mode).


Installation Instructions
-------------------------
NOTE:
 If a previous version of this driver is already installed, it must
 be removed before proceeding with the installation instructions given
 below.  Use the Add/Remove Programs icon in Control Panel to remove
 the current driver.

  1. Start Windows 95/98/Me.
  2. Extract the drivers onto the hard disk dirve.
  3. Click Start, slect Settings, then click Control Panel.
  4. Double click the Add New Hardware icon.
  5. At the Begin installing your new hardware window, Select Next.
     If installing on Windows 95 continue to step 6.
     If installing on Windows 98/Me do the following:
     - At the search for new Plug and Play devices windows, click Next.
     - At the Is the device that you want to install listed below? window,
       select No, the device isn't in the list and click Next.
  6. When prompted Do you want Windows to search for your new hardware?
     choose No, I want to select the hardware from a list and click Next.
  7. Under Hardware types, select Other devices and click Next.
  8. At the Select the manufacturer window, click the Have Disk
     button.
  9. Specify the directory where the driver files are extracted and click
     the OK button.  The Driver list will appear.
     Default path is C:\DRIVERS\W9X\BASEATCH\
 10. Select ThinkPad UltraBase Hot-Attach Driver and click Next.
 11. Click the Finish button.
 12. If you had to follow the steps in ** case A ** , you may see the
     following warning dialog.
      A file being copied is older than the file currently on your
      computer. It is recommended that you keep you existing file.
            ....
     Do you want to keep this file?
     Select No to ignore it, and continue the installation.
 13. Restart the operating system 
     

Determining which version is installed
--------------------------------------
 1. Click UltraBase Tray Icon in Task Tray.
 2. Select About.
 3. Version (ex. IMUX03US) which is written at above Summary of Changed or
    Fixed Items section will appear.

  ex. If Version : IMUX03US appear in About Panel, it means Version 1.00.

Trademarks
----------
IBM and ThinkPad are trademarks of IBM Corporation.

Microsoft and Windows are trademarks of Microsoft Corporation.