IBM ThinkPad April 27, 2004 USB Diskette Drive Driver III for Windows 95/98/98 SE Version 2.00 ====================================================================== Notice: ------- - This package supports two types of USB Diskette Drives. The following USB Diskette Drives are supported: +-------------------------------------------+------------------+---------------------+ | | | Driver Version | | USB Diskette Drive Name | FRU P/N(*1) +----------+----------+ | | |Windows 95|Windows 98| +-------------------------------------------+------------------+----------+----------+ |IBM External USB Floppy Disk Drive (TEAC) |05K9283 | 1.02 | 3.00 | +-------------------------------------------+------------------+----------+----------+ |USB Portable Diskette Drive (TEAC) |22P7066 | 1.02 | 3.00 | +-------------------------------------------+------------------+----------+----------+ |USB Portable Diskette Drive (Y-E Data/SONY)|06P5221 or 06P5223| 4.51 | 4.51 | +-------------------------------------------+------------------+----------+----------+ NOTE:(*1)FRU P/N is printed on USB Diskette Drive. Please confirm FRU P/N before installation. - Important: Please refer to the installation guide section for each type of the drive, in order to install the appropriate driver. - When the device driver is installed, the device driver for the other type USB Diskette Drive is also copied onto the hard disk drive for interoperability. - Do not compress and decompress a diskette on this drive by DriveSpace 3. - This driver does not support more than two drives. Use only one drive in your ThinkPad computer. - When the IBM USB Diskette Drive is used on ThinkPad A21e (Machine Type 2655) and A22e, the legacy floppy drive should be disabled in the IBM BIOS Setup Utility. - This program is language independent and can be used with any language operating system. What This Package Does ----------------------- This package provides the device driver of IBM USB Diskette Drive for Windows 95/98 users. The driver enables or updates the following IBM USB Diskette Drive function. - IBM External USB Floppy Disk Drive (TEAC) (FRU P/N 05K9283) - USB Portable Diskette Drive (TEAC) (FRU P/N 22P7066) - USB Portable Diskette Drive (Y-E Data/SONY) (FRU P/N 06P5221 or 06P5223) The following ThinkPad computers are supported: - ThinkPad 130(*2) - ThinkPad A21e (Machine Type 2655) - ThinkPad A22e Celeron Model(*2) - ThinkPad R30(*2), R31(*2), R32(*2), R40(*2) - ThinkPad X20, X21, X22, X23, X24 - ThinkPad X30(*2), X31(*2) - ThinkPad T40(*2), T41(*2), T42(*2) - ThinkPad G40(*2) - ThinkPad i Series 1200(*2) - ThinkPad i Series 1300(*2) - ThinkPad TransNote(*2) NOTE: *2: Support for Windows 98/98 SE only. To determine if you should update the driver, refer to the "Summary of Changes" section. To update the driver, refer to the "Installation Instructions" section. Released Versions ----------------- Version 1.00 Initial release Version 1.01 Problem fixes Version 2.00 Add support model Summary of Changes ------------------ Where: Version (for example, 1.00 means Version 1.00) (New) New function or enhancement (Fix) Correction to existing functions <1.00> - (New) Initial release - (Fix) (IBM External USB Floppy Disk Drive (TEAC) FRU P/N 05K9283) System doesn't work correctly when USB Floppy Disk Drive is attached and let system hibernate, or suspend/resume. <1.01> - (Fix) (IBM External USB Floppy Disk Drive (TEAC) FRU P/N 05K9283) Cannot access the license key diskette of "JAWS for Windows Ver 3.7 (Screen Reader Program)". - (Fix) (IBM External USB Floppy Disk Drive (TEAC) FRU P/N 05K9283) Copying file to the USB FDD takes long time. - (Fix) (IBM External USB Floppy Disk Drive (TEAC) FRU P/N 05K9283) Hot attach/detach USB FDD to PC repeatedly, then blue screen appear. - (New) Add ThinkPad X22 into the support list. - (New) Add ThinkPad R30 into the support list. - (New) Add ThinkPad X23 into the support list. - (New) Support USB Portable Diskette Drive (TEAC) (FRU P/N 22P7066). <2.00> - (New) Add problem fixes information on old driver version. - (New) Change the number of driver version from <1.01> to <2.00>. - (New) Add ThinkPad R31 into the support list. - (New) Add ThinkPad X24 into the support list. - (New) Add ThinkPad R32 into the support list. - (New) Add ThinkPad X30 into the support list. - (New) Add ThinkPad R40 into the support list. - (New) Add ThinkPad T40 into the support list. - (New) Add ThinkPad X31 into the support list. - (New) Add ThinkPad G40 into the support list. - (New) Add ThinkPad T41 into the support list. - (New) Add ThinkPad T42 into the support list. NOTE: There is no change to the driver itself between and . If you have already updated the driver to V1.01, you do not need to apply . Installation Instructions ------------------------- NOTES: 1. This package supports both IBM External USB Floppy Disk Drive (TEAC) and USB Portable Diskette Drive (Y-E Data/SONY). Installation procedure is different for each drive. See applicable installation section. 2. The drivers for Windows 95 and Windows 98 are stored in the different directory. See the list below: +----------------+-----------+ | Device Drivers | Directory | +----------------+-----------+ | for Windows 95 | WIN95 | +----------------+-----------+ | for Windows 98 | (root) | +----------------+-----------+ I) For IBM External USB Floppy Disk Drive (TEAC) (FRU P/N 05K9283) or USB Portable Diskette Drive (TEAC) (FRU P/N 22P7066) ------------------------------------------------------------------ CLEAN INSTALL FOR WINDOWS 95: 1. Start Windows 95. 2. Extract this package onto the hard disk drive. 3. Connect the IBM External USB Floppy Disk Drive or the USB Portable Diskette Drive to the system. 4. Please read through the following three options: a) If Update Device Driver Wizard for Generic USB Hub appears, install Generic USB Hub driver by installation instruction provided by Windows 95. Then return to step 1. b) If Update Device Driver Wizard for Unknown Device appears, go to step 5. c) If the dialog requesting for the driver does not appear, follow the instruction UPDATE INSTALL section. 5. Click Next. 6. Click Other Locations. Specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 7. Click Finish. 8. If Insert Disk dialog appears, click OK. Then specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 9. Restart the computer to make the new settings effective. UPDATE INSTALL FOR WINDOWS 95: 1. Start Windows 95. 2. Extract this package onto the hard disk drive. 3. Connect the IBM External USB Floppy Disk Drive or the USB Portable Diskette Drive to the system. 4. Click Start, select Settings, and then click Control Panel. 5. Double-click the System icon. 6. Click the Device Manager tab. 7. Select PnP TEAC USB FDD under Floppy disk controllers. 8. Click Properties. 9. Click Driver. 10. Click Update Driver. 11. For Do you want Windows to search for the driver?, select Yes. Click Next. 12. Click Other Locations. 13. Specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 14. Click Finish. 15. If Insert Disk dialog appears, click OK. Then specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 16. Click Close. 17. Click Close in the System Properties window. 18. Restart the computer to make the new settings effective. CLEAN INSTALL FOR WINDOWS 98: 1. Start Windows 98. 2. Extract this package onto the hard disk drive. 3. Connect the IBM External USB Floppy Disk Drive or the USB Portable Diskette Drive to the system. 4. Please read through the following two options: a) If Add New Hardware Wizard for TEAC FD-05PU appears, go to step 5. b) If the dialog requesting for the driver does not appear, follow the instruction UPDATE INSTALL FOR WINDOWS 98 section. 5. Click Next. 6. Select Search for the best driver for your device. (Recommended). Then click Next. 7. Select Specify a location: and specify the directory name with the full path name where you extracted the package in the step 2, then click Next. Example) c:\drivers\w9x\usbfdd 8. Click Next. 9. Click Finish. 10. Restart the computer to make the new settings effective. UPDATE INSTALL FOR WINDOWS 98: 1. Start Windows 98. 2. Extract this package onto the hard disk drive. 3. Connect the IBM External USB Floppy Disk Drive or the USB Portable Diskette Drive to the system. 4. Click Start, select Settings, and then click Control Panel. 5. Double-click the System icon. 6. Click Device Manager. 7. Select PnP TEAC USB FDD. It may be found under Other devices or under Floppy disk controllers. 8. Click Properties. 9. Click Driver. 10. Click Update Driver. 11. Click Next. 12. Select Search for a better driver than the one your device is using now. (Recommended). Click Next. 13. Select Specify a location: and specify the directory name with the full path name where you extracted the package in the step 2, then click Next. Example) c:\drivers\w9x\usbfdd 14. Select The updated driver (Recommended). Click Next. 15. Click Next. 16. Click Finish. 17. Click Close. 18. Click Close in the System Properties window. 19. Restart your computer to make the new settings effective. II) For USB Portable Diskette Drive (Y-E Data/SONY) (FRU P/N 06P5221 or 06P5223) --------------------------------------------------- CLEAN INSTALL FOR WINDOWS 95: 1. Start Windows 95. 2. Extract this package onto the hard disk drive. 3. Connect the USB Portable Diskette Drive to the system. 4. Please read through the following three options: a) If Update Device Driver Wizard for Generic USB Hub appears, install Generic USB Hub driver by installation instruction provided by Windows 95. Then return to step 1. b) If Update Device Driver Wizard for Unknown Device appears, go to step 5. c) If the dialog requesting for the driver does not appear, follow the instruction UPDATE INSTALL FOR WINDOWS 95 section. 5. Click Next. 6. Click Other Locations. Specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 7. Click Finish. 8. If Insert Disk dialog appears, click OK. Then specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 9. Update Device Driver Wizard appears. 10. Click Next. 11. Click on Other Locations. Specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 12. Click Finish. 13. If Insert Disk dialog appears, click OK. Then specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 14. Restart the computer to make the new settings effective. UPDATE INSTALL FOR WINDOWS 95: 1. Start Windows 95. 2. Extract this package onto the hard disk drive. 3. Connect the USB Portable Diskette Drive to the system. 4. Click Start, select Settings, and then click Control Panel. 5. Double-click the System icon. 6. Click the Device Manager tab. 7. Select USB FDD (VXD) under Floppy disk controllers. 8. Click Properties. 9. Click Driver in the USB FDD (VXD) Properties window. 10. Click Update Driver. 11. For Do you want Windows to search for the driver?, select Yes. Click Next. 12. Click Other Locations. Specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 13. Click Finish. 14. If Insert Disk dialog appears, click OK. Then specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 15. If Do you want to restart your computer now? prompt appears, click No. 16. Click Close in the USB FDD (VXD) Properties window. 17. Select USB FDD under Universal serial bus controller. 18. Click Properties. 19. Click Driver in the USB FDD Properties window. 20. Click Update Driver. 21. For Do you want Windows to search for the driver?, select Yes. Click Next. 22. Click Other Locations. Specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 23. Click Finish. 24. If Insert Disk dialog appears, click OK. Then specify the directory name with the full path name where you extracted the package in the step 2, and click OK. Example) c:\drivers\w9x\usbfdd\WIN95 25. Click Close. 26. Click Close in the System Properties window. 27. Restart the computer to make the new settings effective. CLEAN INSTALL FOR WINDOWS 98: 1. Start Windows 98. 2. Extract this package onto the hard disk drive. 3. Connect the USB Portable Diskette Drive to the system. 4. Please read through the following two options: a) If Add New Hardware Wizard for FlashBuster-U appears, go to step 5. b) If the dialog requesting for the driver does not appear, follow the instruction UPDATE INSTALL FOR WINDOWS 98 section. 5. Click Next. 6. Select Search for the best driver for your device. (Recommended). Click Next. 7. Select 'Specify a location:' and specify the directory name with the full path name where you extracted the package in the step 2, then click Next. Example) c:\drivers\w9x\usbfdd 8. Click Next. 9. Click Finish. 10. Add New Hardware Wizard appears. Click Next. 11. Select Search for the best driver for your device. (Recommended). Then click Next. 12. Select Specify a location: and specify the directory name with the full path name where you extracted the package in the step 2, then click Next. Example) c:\drivers\w9x\usbfdd 13. Select The updated driver (Recommended). Click Next. 14. Click Next. 15. Click Finish. 16. Restart the computer to make the new settings effective. UPDATE INSTALL FOR WINDOWS 98: 1. Start Windows 98. 2. Extract this package onto the hard disk drive. 3. Connect the USB Portable Diskette Drive to the system. 4. Click Start, select Settings, and then click Control Panel. 5. Double-click the System icon. 6. Click the Device Manager tab. 7. Select USB FDD (VXD) under Floppy disk controllers. 8. Click Properties. 9. Click Driver in the USB FDD (VXD) Properties window. 10. Click Update Driver. 11. Click Next. 12. Select Search for a better driver than the one your device is using now. (Recommended). Click Next. 13. Select Specify a location: and specify the directory name with the full path name where you extracted the package in the step 2, then click Next. Example) c:\drivers\w9x\usbfdd 14. Select The updated driver (Recommended). Click Next. 15. Click Next. 16. Click Finish. 17. Click Close. 18. Select USB FDD under Universal Serial Bus controller. 19. Click the Properties button. 20. Click the Driver tab in the USB FDD Properties window. 21. Click Update Driver. 22. Click Next. 23. Select Search for a better driver than the one your device is using now. (Recommended). Then click Next. 24. Select Specify a location: and specify the directory name with the full path name where you extracted the package in the step 2, then click Next. Example) c:\drivers\w9x\usbfdd 25. Click Next. 26. Click Finish. 27. Click Close. 28. Click Close in the System Properties window. 29. Restart the computer to make the new settings effective. Determining which version is installed: --------------------------------------- I) For IBM External USB Floppy Disk Drive (TEAC) (FRU P/N 05K9283) or USB Portable Diskette Drive (TEAC) (FRU P/N 22P7066) -------------------------------------------------------------- Windows 95 To determine the installed driver version, check the date stamp of each file which is installed in the system. File Name | Version 1.02 | --------------+-------------------+ TEACUFDD.exe | 7/16/99 10:08 AM | TEACUFDD.sys | 3/16/00 5:12 PM | TEACVSDD.vxd | 3/15/00 1:08 AM | To check the date/time of these files, 1. Start Windows 95. 2. Click Start, select Find, then click Files or Folders. 3. Click the Name & Location tab. 4. Type the each file name listed above table in the Named: field. 5. Specify Local Hard drives (C:,D:) in the Look in: field, then check the Include subfolders. 6. Click the Find Now button. Windows will now search your hard drive for the specified file. If the file is not found, the driver is not installed on your system. 7. In the In Folder part of the window, select the file name located in C:\WINDOWS\SYSTEM. Then look at the Modified column to check the date/time of the each file. Windows 98 1. Start Windows 98. 2. Connect the IBM External USB Floppy Disk Drive to the system. 3. Click Start, select Settings, then click Control Panel. 4. Double-click the System icon. 5. Click the Device Manager tab. 6. Double-click Floppy disk controllers. 7. Select PnP TEAC USB FDD and click the Properties button. 8. Click the Driver tab. 9. Click the Driver File Details button. 10. Click TEACVSDD.VXD in Driver Files:. 11. File version column shows the driver version. II) For USB Portable Diskette Drive (Y-E Data/SONY) (FRU P/N 06P5221 or 06P5223) --------------------------------------------------- Windows 95 1. Start Windows 95. 2. Click Start, select Find, then click Files or Folders. 3. Click the Name & Location tab. 4. Type the each file name listed below table in the Named: field. 5. Specify Local Hard drives (C:,D:) in the Look in: field, then check the Include subfolders. 6. Click the Find Now button. Windows will now search your hard drive for the specified file. If the file is not found, the driver is not installed on your system. 7. In the In Folder part of the window, select the file name located in C:\WINDOWS\SYSTEM32\DRIVERS. Then look at the Modified column to check the date/time of the each file. File Name | Version 4.51 | -------------+-------------------+ USBFDD.SYS | 5/30/00 4:51 AM | Windows 98 1. Start Windows 98. 2. Connect the IBM External USB Floppy Disk Drive to the system. 3. Click Start, select Settings, then click Control Panel. 4. Double-click the System icon. 5. Click the Device Manager tab in the System Properties window. 6. Select USB FDD under Universal Serial Bus controller. 7. Click the Properties button. 8. Click the Driver tab in the USB FDD Properties window. 9. Click the Driver File Details... button. 10. Select USBFDD.SYS in Driver Files:. 11. Driver version appears after File version:. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Windows is a registered trademark of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.