IBM ThinkPad                                            March 19, 2003
ThinkPad AMR Modem (CDC) for Windows XP

Version 2.1.20a
======================================================================

Notice:
-------
This program is language independent and can be used with any language
system.

What This Packages Does
-----------------------
This package provides the CDC Modem driver for Windows XP.

The Modem driver enables or updates the Modem function of ThinkPad AMR
Modem (CDC) of the following ThinkPad computers:

    - ThinkPad R32 (except Ethernet Wireless integrated model *1)

*1 If your ThinkPad R32 is the Ethernet Wireless integrated model, Use
   Modem driver (AMR Wireless combo card) for Windows XP instead of this
   package.

To determine if you should update the Modem driver, refer to the
Summary of Changes section.

To update the modem driver, refer to the Installation instructions
section.

Released Versions
-----------------
Version 2.1.7	Initial release.
Version 2.1.20	A problem fix.
Version 2.1.20a   A problem fix.
	NOTE: There is no functional change in the driver itself from 
              V2.1.20.  If version V2.1.20 is already installed, 
              and no problems exist, you do not need to install this
              release.  

Summary of Changes
------------------
Where: <n.nn>  Version (for example, 1.00 means Version 1.00)
       (New)   New function or enhancement
       (Fix)   Correction to existing function

<2.1.7>
 - (New) Support ThinkPad R32.


<2.1.20>
 - (Fix) Fix connectivity issue in Italy.

<2.1.20a>
 - (Fix) Cannot dial with pulse in Spain.
    NOTE: There is no functional change in the driver itself from 
          V2.1.20.  If version V2.1.20 is already installed, 
          and no problems exist, you do not need to install this
          release.  


Installation instructions
-------------------------
NOTE: If the audio driver has not been installed on the system, install
      the audio driver prior to the modem driver.

Manual installation
 1. Start Windows XP and logon with administrative privileges.
 2. Extract this package onto the hard disk drive.
 3. Click Start and then click Run.
 4. Specify C:\DRIVERS\WXP\MODEM\SETUP.EXE and click OK.
 5. Follow the instructions. 
 6. Restart the system for the driver to be effective.

Unattended installation
NOTE: This is for system administrators' use only.
 1. Start Windows XP and logon with administrative privileges.
 2. Extract the drivers to the hard disk drive.
 3. Click Start and then click Run.
 4. Type C:\DRIVERS\WXP\MODEM\SETUP.EXE  -S, and click OK.

Manual uninstallation
 1. Start Windows XP and logon with administrative privileges.
 2. Click Start and then click Control Panel.
 3. Click the Add/Remove Programs icon.
 4. Select Agere Systems AC'97 Modem.
 5. Click Change/Remove.
 6. Click Yes in the confirmation window.
 7. When asked to restart the system, click Yes.

NOTE: If you do not remove the modem hardware, then Windows will detect
      the modem again on the next boot.


Determining which version is installed
--------------------------------------
 1. Start Windows XP
 2. Click Start, then click Control Panel.
 3. Click Printers and Other Hardware, then click Phone and Modem
    Options icon.
    Or double-click Phone and Modem Options icon.
 4. Click Modems tab.
 5. Select Agere Systems AC'97 Modem then click
    Properties button.
 6. Select Diagnostics tab and click Query Modem button.
 7. Check Command | Response window to check the result of ATI3. The
    version of the driver installed is displayed.

NOTE: This version information does not show minor version.
      For example, the version 2.1.20a shows version 2.1.20

Trademarks
----------
  * IBM and ThinkPad are trademarks of IBM Corporation.
  * Windows is a trademark of Microsoft Corporation.

Other company, product, and service names may be registered trademarks,
trademarks or service marks of others.