IBM ThinkPad 560X Apr 13, 1998 System Program Service Diskette Version 1.01 ============================================ What This Diskette Does ----------------------- This System Program Service Diskette updates the system BIOS program stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. The supported models are as follows. - ThinkPad 560X To determine if you should update the system program, please refer to the "Summary of Change" section. To update the system program, please refer to the "Updating System Program" section. Released Version ---------------- Version 1.00 A fix for problems as noted below. Version 1.01 A fix for problems as noted below. Summary of Change ----------------- Key: Diskette Version (for example, 1.00 means Version 1.00) (New) New Function or Enhancement (Fix) Correction to existing function <1.00> - (Fix) If attached DIMM does not supports self-refresh, do nothing related to refresh control. <1.01> - (Fix) Keystroke entry immediately after entering the power on password can result in failure of proper recognition of subsequent keystrokes That is, a keystroke immediately after the entry of a password (before the operating system is fully loaded), can cause problems with any subsequent keyboard entry. If you experience this problem, update the BIOS with this SPSD. - (Fix) If any flicker or jitter is noticed in various images on HPA LCD models, update the BIOS with this SPSD to update the video bios to improve the appearance of the images. Updating System Program ----------------------- Notes: - You need an AC adapter and a charged battery pack to update the system program. - If your computer is attached to a port replicator, turn off the computer and detach it before proceeding. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Insert the System Program Service Diskette into the diskette drive and turn on the computer. 4. Select "Read this first..." from the menu and carefully read the information that appears. 5. Press the Esc key to return to the menu. 6. Select "Update system program" and follow the instruction on the screen. Warning: Do not turn off or suspend the computer until the update has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, run the diagnostics to make sure that the computer runs with no errors: 7. Make sure the System Program Service Diskette is removed from the diskette drive, then turn off the computer. 8. Press and hold the F1 key, then turn on the computer. Hold the F1 key until the Easy-Setup menu appears. 9. If a password prompt appears, type the correct password. 10. Select Test, then select Start to run all the basic tests. Various test patterns will appear on the screen. An OK will appear for each device that passes the test. 11. Verify that OK appears for all of the devices tested. 12. Press the Esc key to exit Test and turn off the computer. System Program Information -------------------------- Each version of the System Program Service Diskette contains the following system program (BIOS). The BIOS P/N and the date can be viewed by invoking Easy-Setup menu. Diskette BIOS BIOS Version P/N Date -------- ------- -------- 1.00 97H4580 12-02-97 1.01 97H4071 04-06-98 Service Information ------------------- The System Program Service diskette installs System Program as follows. Reserved Usable ThinkPad Model BIOS P/N Date BIOS Area* BIOS ROM Area* ------------------------------------------------------------------------ 560X 97H4071 04/06/98 C000-C7FF E000-EFFF F000-FFFF * NOTE: - Memory Range C000-C7FF is reserved for Video BIOS. - Memory Range E000-EFFF can be used as UMB (Upper Memory Block) by a memory manager such as EMM386.EXE. - Memory Range F000-FFFF is reserved for BIOS. The BIOS P/N and the date can be viewed by invoking Easy-Setup menu. Trademarks ---------- * IBM and ThinkPad are trademarks of IBM Corporation.