IBM ThinkPad                                          September 25, 2000
Remote CMOS Update Utility for LANClient Control Manager (LCCM)

Version 1.55
========================================================================

What This Program Does
-----------------------
This program updates ThinkPad's CMOS data remotely using LCCM Version 2.0
or higher.

The following models are supported:
   - ThinkPad 380Z
   - ThinkPad 390E, 390X
   - ThinkPad 560Z
   - ThinkPad 570, 570E
   - ThinkPad 600, 600E, 600X
   - ThinkPad 770, 770E, 770X, 770Z
   - ThinkPad A20p, A20m, T20, X20
   - ThinkPad A21p, A21m, A21e, T21


To determine if you have to update this program or not, refer to the
"Summary of Changes" section.

To use this program, refer to the "How to use" section.


Released Versions
-----------------
Version 1.00     Initial release
Version 1.10     Support for new models
Version 1.55     Support for new models

Summary of Changes
------------------
Where: <n.nn>  Diskette version (for example, 1.00 means Version 1.00)
       (New)   New function or enhancement
       (Fix)   Correction to existing function

<1.00>
 -(New) Initial release.

<1.10>
 -(New) Support for ThinkPad 600E (new models) and 600X.

<1.55>
 -(New) Support for ThinkPad 770Z, 390X, 570, 570E, A20p, A20m, T20, X20
 -(New) Support for ThinkPad A21p, A21m, A21e, T21


How to use
----------
This information is a supplement of "Creating a CMOS Settings Image" of
"Chapter 4. Procedures" in "LCCM V2.0 Training and Procedure Guide"
(G10L-9830-0) when CMOS update on ThinkPad using LCCM is performed.

Creating a CMOS Settings Image (for ThinkPad user)

1. At a donor workstation:
   a. Start up the workstation and access the Easy-Setup or IBM BIOS
      Setup Utility program.
      (you can access this program by pressing F1 during the power-on
      self-test (POST)).
   b. Change and save the desired setting as required.
   c. Exit from the Easy-setup or IBM BIOS Setup Utility program and
      restart the workstation. Ensure that the workstation starts up
      and functions properly.

2. Rename the SRCMOS.EXE.(refer to the table below to rename the program
   name.)
       => 'SRCMOS' + 'xx' + '.EXE'
                       xx: system board identifier (two character)

3. Use the SRCMOSxx.EXE program to save the current settings of the donor
   workstation to a file named with the .CMS extension.
   At a Command Prompt, enter:
       > SRCMOSxx \path\file_name.CMS /create
                                     (/capture)

4. Copy SRCMOSxx.EXE and .CMS file to the corresponding BIOS directory
   on your server which is named:
       C:\LCCM_install_dir\BIOS\Flash_BIOS_Name
         where the 'Flash_BIOS_Name' directory is the name of the BIOS
         level on your donor workstation (unless this was changed by the
         system administrator during the Read BIOS Flash diskette process).

   Note: When you are not able to get the BIOS update diskette:
   a. Check the "Current BIOS Level" of the Maintenance page of the
      Individual Client Details notebook.
   b. Create the directory under the \LCCM_install_dir\BIOS which
      has the same name to "Current BIOS Level".
      For example, if "Current BIOS Level" is IBUJ01WW, the required
      directory is:
           \LCCM_installed_dir\BIOS\IBUJ01WW
   c. Copy SRCMOSxx.EXE and .CMS file to above directory.

        You must uncheck the "Update BIOS" check box of the Maintenance
        page. (Check the "Update CMOS with file" check box only)

    -----------------------------------------------------------------
   |      Product name       |  BIOS level name   |   CMOS over LAN  |
   |                         | (Flash_BIOS_Name)  |   program name   |
   |-------------------------|--------------------|------------------|
   | ThinkPad 380Z           |    IGUJaabb        |   SRCMOSIG.EXE   |
   | ThinkPad 390E           |    R0x_xx          |   SRCMOSR0.EXE   |
   | ThinkPad 390X           |    ISBxxxbb        |   SRCMOSIS.EXE   |
   | ThinkPad 560Z           |    IEUJaabb        |   SRCMOSIE.EXE   |
   | ThinkPad 570            |    IMUJaabb        |   SRCMOSIM.EXE   |
   | ThinkPad 570E           |    IUUJaabb        |   SRCMOSIU.EXE   |
   | ThinkPad 600            |    IBUJaabb        |   SRCMOSIB.EXE   |
   | ThinkPad 600E (*1)      |    IHUJaabb        |   SRCMOSIH.EXE   |
   | ThinkPad 600E (*2)      |    INUJaabb        |   SRCMOSIN.EXE   |
   | ThinkPad 600X           |    ITUJaabb        |   SRCMOSIT.EXE   |
   | ThinkPad 770/770E/770ED |    IDUJaabb        |   SRCMOSID.EXE   |
   | ThinkPad 770X           |    IIUJaabb        |   SRCMOSII.EXE   |
   | ThinkPad 770Z           |    IOUJaabb        |   SRCMOSIO.EXE   |
   | ThinkPad A20p           |    IVUJaabb        |   SRCMOSIV.EXE   |
   | ThinkPad A20m           |    IWUJaabb        |   SRCMOSIW.EXE   |
   | ThinkPad A21p           |    KYUJaabb        |   SRCMOSKY.EXE   |
   | ThinkPad A21m           |    KXUJaabb        |   SRCMOSKX.EXE   |
   | ThinkPad A21e           |    KUUJaabb        |   SRCMOSKU.EXE   |
   | ThinkPad T20            |    IYUJaabb        |   SRCMOSIY.EXE   |
   | ThinkPad T21            |    KZUJaabb        |   SRCMOSKZ.EXE   |
   | ThinkPad X20            |    IZUJaabb        |   SRCMOSIZ.EXE   |
    -----------------------------------------------------------------
                                   aa: version, bb: country code

  (*1) 2645 - 55*, A5U, BA*(except for BAU), BB*, JJ1, JJ2, RRA
  (*2) 2645 - 3**, 4**, 5A*, 5B*, 5J*, 8**, AAU, AL*, AM*, BAU, C**,
       2645 - D**, E**, F**, G**, I**, JJ3, M**, P**, R**(except for RRA),
       2645 - SS*, U**
       2646 - All models


Trademarks
----------
  * IBM, ThinkPad and LANClient Control Manager are registered trademarks
    of IBM Corporation.

Other company, product, and service names may be registered trademarks,
trademarks or service marks of others.