IBM ThinkPad 600E October 3, 2000 2645-3Ax, 2645-4Ax, 2645-5Ax, 2645-8Ax, 2645-4Bx, 2645-5Bx, 2645-8Bx, 2645-BAx System Program Service Diskette Version 1.11 (INET31WW) ========================================================================== Notice: ------- This program is language independent and can be used with any language system. What This Diskette Does ----------------------- The System Program Service Diskette given here can update the system program stored in the ThinkPad system to fix problems, add new functions, or expand functions. The supported models are as follows. - ThinkPad 600E (2645 - Selected models, see list below) - ThinkPad 600E (2646 - All models) This system program can only be installed on the follow model and type numbers. It can not be installed on any other models. 2645 - 3**, 4**, 5A*, 5B*, 5J*, 8**, AAU, AL*, AM*, BAU, C**, D**, 2645 - E**, F**, G**, I**, JJ3, M**, P**, R** except for RRA, SS*, U** 2646 - All models To determine if you should update the system program, refer to the "Summary of Change" section. To update the system program, refer to the "Updating System Program" section. Released Versions ----------------- Version 1.00 (INET20WW) (Initial Release) Support for display adapters Version 1.01 (INET21WW) Support for Windows 2000 Professional Beta-3 Version 1.02 (INET22WW) A fix for problems as noted below Version 1.03 (INET24WW) A fix for problems as noted below Version 1.04 (INET24WW) A fix for slave controller as noted below Version 1.05 (INET25WW) Support for Windows 2000 RC2 Release A fix for problems as noted below Version 1.06 (INET26WW) A fix for problems as noted below Version 1.08 (INET28WW) Support for Windows 2000 Version 1.09 (INET29WW) A fix for problems as noted below Version 1.10 (INET30WW) A fix for problems as noted below Version 1.11 (INET31WW) A fix for problems as noted below Summary of Changes ------------------ Key: Diskette Version (for example, 1.00 means Version 1.00) (New) New Function or Enhancement (Fix) Correction to existing function <1.00 - INET20WW> - (New) Following display adapter support. - Colorgraphic Evolution 4 - Matrox Productiva G100 - Matrox Millennium G200 SD (Notice) It is necessary to update the following video driver along with this system program update when you are using TV-out function. ThinkPad Video Features package (NM2200) for Windows 95/98 Version 2.05.06Q or later. <1.01 - INET21WW> - (New) Support for Windows 2000 Professional Beta-3 Release <1.02 - INET22WW> - (New) Change the suspend timer value for High Performance mode from 60 minutes to zero (Default) - (Fix) When resuming from suspend/hibernation, cancels NumLock while entering the Power on Password. <1.03 - INET24WW> - (Fix) It may take the system a long time to resume from hibernation <1.04 - BIOS:INET24WW, slave:IHHT08WW> - (Fix) Battery charging parameters changed to optimize battery function. This release is for updating the slave controller program to version 1.08, 07/16/99 - IHHT08WW. The 1.04 diskette contains same version of BIOS as 1.03 diskette. If your system is already at BIOS level INET24WW, the update process will skip the BIOS update and begin updating slave controller. NOTE: The slave controller manages the Power Management functions of the system. <1.05 - INET25WW> - (New) Support for Windows 2000 RC2 Release - (Fix) Support for Adaptec AHA2940U2W - (Fix) When the power on password is installed, the mouse pointer will disappear in Windows 98 after the system resumes by timer or an in-coming modem call - (Fix) The LCD Screen is out of synchronization in 400x300 video mode when screen expansion is enabled. <1.06 - INET26WW> - (New) Support has been added for the 256 MB memory dimm. - (Fix) Support for ATI Technologies XPERT98. - (Fix) The system should no longer experience an InfraRed configuration problem. - (Fix) The system now forces UltraDMA mode for Docking IDE to UltraDMA mode2. <1.08 - INET28WW> - (New) Support for Windows 2000 <1.09 - INET29WW> - (Fix) After installing USB or other device drivers in Windows 95 OSR2.1, the system will hang while rebooting. - (Fix) After updating the BIOS, Linux will not boot or can not be installed properly. <1.10 - INET30WW> - (Fix) POST error 188 when previously suspend and resume made during UMS being accessing storage. - (Fix) System doesn't resume from standby mode with PCI video card. <1.11 - INET31WW> - (Fix) Fixes hibernation file so that the system can boot if the hard drive root directory has no free space. Updating System Program ----------------------- Notes: - You need an AC adapter and a charged battery pack to update the system program. - If your computer is attached to any kinds of Docking station or port replicator, turn off the computer and detach it before proceeding. - To check slave controller version, 1. Version number can be viewed by invoking Easy-Setup and selecting Config followed by System Board. 2. Run ThinkPad Configuration from operating system, and select System Information from Help menu or System Information button. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Insert the System Program Service Diskette into the diskette drive and turn on the computer. 4. Select Read this first from the menu and carefully read the information that appears. 5. Press the Esc key to return to the menu. 6. Select Update system program and follow the instruction on the screen. Warning: Do not turn off or suspend the computer until the update has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, do the following to make the changes effective. 7. Make sure the System Program Service Diskette is removed from the diskette drive, then turn off the computer. 8. Press and hold the F1 key, then turn on the computer. Hold the F1 key until the Easy-Setup menu appears. 9. If a password prompt appears, type the correct password. 10. Select Config, then select Initialize. 11. Select OK to initialize the system. Run the diagnostics to make sure that the computer runs with no errors: 12. Turn off the computer, press and hold the F1 key, then turn on the computer. Hold the F1 key until the Easy-Setup menu appears. 13. Select Test, then select Start to run all the basic tests. Various test patterns will appear on the screen. An OK will appear for each device that passes the test. 14. Verify that OK appears for all of the devices tested. 15. Press the Esc key to exit Test and turn off the computer. System Program Information -------------------------- Each version of the System Program Service Diskette contains the following system program (BIOS). The BIOS Version and the date can be viewed by invoking Easy-Setup. Slave controller version number can be viewed by running ThinkPad Configurator from your operating system and select System Information from the Help menu or System Information button. Slave controller information can also be found by invoking Easy-Setup and selecting Config followed by System Board. Diskette BIOS BIOS Slave controller Slave controller Version Version Date Version Date -------- -------- -------- ---------------- ---------------- 1.00 INET20WW 03-26-99 1.01 INET21WW 04-14-99 1.02 INET22WW 04-28-99 1.03 INET24WW 05-24-99 1.04 INET24WW 05-24-99 1.08 IHHT08WW 07-16-99 1.05 INET25WW 09-10-99 1.08 IHHT08WW 07-16-99 1.06 INET26WW 11-19-99 1.08 IHHT08WW 07-16-99 1.08 INET28WW 11-20-99 1.08 IHHT08WW 07-16-99 1.09 INET29WW 11-20-99 1.08 IHHT08WW 07-16-99 1.10 INET30WW 11-20-99 1.08 IHHT08WW 07-16-99 1.11 INET31WW 11-20-99 1.08 IHHT08WW 07-16-99 Service Information ------------------- The System Program Service diskette installs System Program as follows. ThinkPad BIOS BIOS Reserved Usable Model Version Date BIOS Area* BIOS ROM Area* ----- ------- ---- --------- ------------- 600E INET31WW 11/20/99 C0000-CBFFF E0000-EFFFF F0000-FFFFF * NOTE: - Memory Range C0000-CBFFF is reserved for Video BIOS. - Memory Range E0000-EFFFF can be used as UMB (Upper Memory Block) by a memory manager such as EMM386.EXE. - Memory Range F0000-FFFFF is reserved for BIOS. The BIOS Version and the date can be viewed by invoking Easy-Setup menu. Simple Boot Flag function ------------------------- This function automatically optimizes the behavior and boot performance of the BIOS and operating system, based on the installed operating system and previous boot. If this function is Enabled and once a Plug and Play-capable operating system, such as Windows 98, is installed, the system BIOS does not configure such hardware resources as system interrupts, memory ranges, and I/O port ranges for all the devices in the system. If you are going to use a non-Plug and Play-capable operating system, disable this function so that the BIOS will configure hardware resources. (Important Notice) If you are using multiple operating systems in addition to Windows 95/98, you must DISABLE the Simple Boot Flag in Easy-Setup. To modify the Simple Boot Flag: 1. Hold down the F1 key on the ThinkPad and power on the system. 2. Open the Config icon. 3. Open the Quick Boot icon. 4. Set Simple Boot Flag to Enable or Disable depending on configuration. Diskette drive letter handling in Windows 2000 ---------------------------------------------- From BIOS version INET25WW, diskette driver letter handling changed to fixed letter way. External FDD : Always A: Internal FDD in Ultraslim bay : Always B: Trademarks ---------- * IBM and ThinkPad are trademarks of IBM Corporation in the United States. * Windows is a trademark of Microsoft Corporation. * Adaptec is a trademark of Adaptec, Inc. * ATI Technologies is a trademark of ATI Technologies, Inc. * Linux is a registered trademark of Linus Torvalds. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.