IBM ThinkPad 390E February 18, 2000 System Program Service Diskette Diskette Version : 1.44 BIOS Version : R01_C0 ======================================================================== Notice: ------- This program is language independent and can be used with any language system. What This Diskette Does ----------------------- This System Program Service Diskette updates the system BIOS program stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. The supported models are as follows. - ThinkPad 390E To determine if you should update the system program, please refer to the "Summary of Changes" section. To update the system program, please refer to the "Updating System Program" section. Released Versions ----------------- Version 1.03 (R00_F4) Initial release Version 1.05 (R00_G2) Problem fixes Version 1.11 (R00_H1) A problem fix Version 1.15 (R00_H5) Problem fixes Version 1.18 (R00_H8) A problem fix Version 1.21 (R00_I1) Support for Windows NT Fuel Gauge program Version 1.27 (R01_A3) A Problem fix Version 1.29 (R01_A5) Problem fixes Version 1.31 (R01_A7) A Problem fix Version 1.33 (R01_A9) A Problem fix Version 1.38 (R01_B4) Problem fixes Version 1.42 (R01_B8) Support for Windows 2000 and problem fixes Version 1.44 (R01_C0) A function improvement Summary of Changes ------------------ Where: x.xx : Diskette version yyyyyyyy : BIOS version For example, <1.03 - R00_F4> means the diskette version is 1.03, and the BIOS version is R00_F4. (New) New Function or Enhancement (Fix) Correction to existing function <1.03 - R00_F4> - (New) Support for ThinkPad 390E. <1.05 - R00_G2> - The default setting of HV Expansion option in IBM BIOS Setup Utility is changed from 'Off' to 'On'. So the video is expanded to fill the whole LCD screen. - (Fix) The system can hang if the AC adapter is attached/detached while hibernation is processing. - (Fix) If the power is off at IBM BIOS Setup Utility, Wake on LAN function does not work. - (Fix) (Windows 95) The system without the internal MODEM can't recognize the EtherJet in the Port Replicator with Advanced EtherJet Feature at warm docking. - (Fix) (Windows 98) If the TrackPoint is disabled in IBM BIOS Setup Utility, the serial mouse doesn't work during Windows 98 installation. - (Fix) After IBM BIOS Setup Utility is called by pressing the F1 key, the IBM Turbo 16/4 Token-Ring PC Card may not be recognized if installed. - (Fix) If neither Modem Ring driver nor CardWorks is installed, the modem function does not work. - (Fix) If the Port Replicator with Advanced EtherJet feature is attached to the system, noises sound. - (Fix) With Wake on LAN feature enabled, the system does not wake up remotely via the LAN after the system is rebooted. - (Fix) The system does not support 'Power-on password update over the LAN' nor 'Setup password update over the LAN' features. However, the system returns incorrect information to client control program as if both features are supported. - (Fix) (Windows 95 Japanese) The system may hang when Fn key function is used. - (Fix) (PC-DOS 2000 Japanese) The system can't enter suspend and hibernation mode when CardSoft software is installed. - (Fix) (Windows 95 Chinese) The system does not turn off the LCD screen when Fn + F3 keys are pressed. <1.11 - R00_H1> - (Fix) (Windows 98) Resume timer function in the scheduled task menu does not work. <1.15 - R00_H5> - Modified displaying the error report from hard disk S.M.A.R.T. function. - (Fix) When the LCD timer is set to 60 minutes, it will turn off the LCD after only 30 minutes. - (Fix) The hibernation function does not work correctly with hard disks over 8 GB. - (Fix) (Windows 98) The system may lock when resuming from hibernation. - (Fix) (Windows 98) During the installation of Windows 98, moving the mouse may cause the system to hang. - (Fix) A password on the second hard disk cannot be set when both the power on password and hard drive 1 passwords are enabled. - (Fix) RPL may fail using the Turbo 16/4 Token-Ring PC card. <1.18 - R00_H8> - (Fix) (Windows 95) When a system without an internal MODEM is warm attached to the Port Replicator with Advanced EtherJet Feature, the EtherJet device in the Port Replicator may have a '!' mark in Device Manager. <1.21 - R00_I1> - (New) (Windows NT 4.0) Support for ThinkPad Fuel Gauge program for Windows NT 4.0. To use the Fuel Gauge program, please get the another package, "Fuel Gauge for Windows NT 4.0", and install it. <1.27 - R01_A3> - (Fix) (Windows 95/98) When the system is attached to the Port Replicator with the Advanced EtherJet Feature, the audio device base I/O address will occasionally change <1.29 - R01_A5> - (Fix) Sometimes the system can hang up at ThinkPad logo screen during booting. - (Fix) (Windows NT 4.0) If the password is set, the system doesn't show password prompt when the system resumes from suspend. However the user still can key in the password. <1.31 - R01_A7> - (Fix) System will sometimes hang at ThinkPad logo screen when it is attached to the Port Replicator with Advanced EtherJet Feature <1.33 - R01_A9> - (Fix) After resuming from suspend, Motorola wireless modem intermittently cannot communicate with the system. <1.38 - R01_B4> - (Fix) Under Windows 98, the system doesn't enter hibernation mode when the hibernation file is created on a partition larger than 8 GB. - (Fix) The 3COM 10/100 CardBus card (3CCFE575BT) is not recognized in DOS when the system is connected to the port replicator. The system may also experience intermittent hangs when booting Windows 95 in this configuration. - (Fix) Cannot use the '+' key to modify the startup sequence in the BIOS setup menu with a non-US Keyboard, so added F5/F6 to have the same function as the +/- keys. - (Fix) If the Supervisor or Hard Disk Drive password is set, applications will not launch after resuming from suspend. <1.42 - R01_B8> - (New) Support for Windows 2000. - (New) BIOS date is now shown in the IBM BIOS Setup Utility menu. - (Fix) The system will not boot by Wake on LAN (WOL) because the hard drive is disabled with a ! mark in the Network Startup menu. The hard drive cannot be enabled by pressing the Shift+1 key. - (Fix) (Windows 95/98) The system hangs with the Port Replicator with Advanced EtherJet Feature when: 1. Press Fn+F12 keys to go into hibernation mode. 2. Detach the Port Replicator. 3. Power on the computer. 4. Press Fn+F12 keys to go into the hibernation mode again. 5. Attach the Port Replicator. 6. Power on the computer, then the system hangs. - (Fix) The password can't be input with the external numeric keypad. - (Fix) The screen may become pink when playing DVD. - (Fix) (Windows 98 Second Edition) The system hangs with blue screen if multiple hardware profiles are created and when the system goes into hibernation mode and then resumes normal operation. - (Fix) If the AC adapter is removed while the system is in suspend mode, the screen may become distorted or the system may hang while trying to resume normal operations. - (Fix) (Windows 95) With the Power-on Password installed, when resuming normal operation from suspend mode, waiting for a long time and then entering the password, no icons are shown on the task bar and the screen is frozen. - --- Conforming for a new type of 14.1 inch LCD panel. <1.44 - R01_C0> - (New) Power Management Update - enhancement of CPU thermal controls designed to take effect during abnormal or fault conditions of the system. Updating System Program ----------------------- Notes: - You need an AC adapter and a charged battery pack to update the system program. 1. Print these instructions or display them on another computer. 2. Firmly connect the AC adapter to the computer. 3. Insert the System Program Service Diskette into the diskette drive and turn on the computer. 4. When prompted press the '1' key to update the system program. Warning: Do not turn off the computer until the update has been completed. IF YOU TURN OFF THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, do the following to make the changes effective. 5. Make sure the System Program Service Diskette is removed from the diskette drive, then press and hold the power switch for more than 5 seconds to turn off the computer. 6. Turn on the computer with pressing F1 key. The system enters IBM BIOS Setup Utility automatically. 7. If a password prompt appears, type the correct password. 8. Press F9 key. 9. Select "Yes" to load default configuration. 10. Press F10 key. 11. Select "Yes". 12. The system restart automatically. System Program Information -------------------------- Each version of the System Program Service Diskette contains the following system BIOS program. Diskette BIOS BIOS Version Version Date -------- ------- --------- 1.03 R00_F4 --- 1.05 R00_G2 --- 1.11 R00_H1 --- 1.15 R00_H5 --- 1.18 R00_H8 --- 1.21 R00_I1 --- 1.27 R01_A3 --- 1.29 R01_A5 --- 1.31 R01_A7 --- 1.33 R01_A9 --- 1.38 R01_B4 --- 1.42 R01_B8 11/11/1999 1.44 R01_C0 11/12/1999 The BIOS Version can be viewed by selecting "System Board" at "Config" in the "IBM BIOS Setup Utility" menu. Trademarks ---------- * IBM, ThinkPad, TrackPoint and Wake on LAN are registered trademarks of IBM Corporation. * Windows is a registered trademark of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.