IBM ThinkPad T40, T40p, T41, T41p, R50, R50p March 01, 2004 System Program Service Diskette BIOS Version : 3.00 (1RETB7WW) Diskette Version : 3.00 ====================================================================== Notice: ------- - This BIOS version will only work with Embedded Controller Program Version 2.04 (or higher). Please get an additional package, Embedded Controller Program Version 2.04 (or higher), and update Embedded Controller Program in the system with it if necessary. - If you should update Embedded Controller Program as well as the BIOS, update Embedded Controller Program first. - This program is language independent and can be used with any language system. What This Diskette Does ----------------------- This System Program Service Diskette updates the system program (BIOS) stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. This release supports the following systems: - ThinkPad R50, R50p - ThinkPad T40, T40p, T41, T41p To determine if you should update the system program, refer to the Summary of Changes section. To update the system program, refer to the Updating System Program (BIOS) section. Released Versions ----------------- Where: Diskette version - BIOS version (BIOS internal ID) Description 1.02 - 1.02 (1RET31WW/27 Feb 2003) Initial Release 1.03 - 1.03 (1RET32WW/04 Mar 2003) Function update and fix for some problems 1.04 - 1.04 (1RET33WW/08 Apr 2003) Function update and fix for some problems 1.05 - 1.05 (1RET34WW/19 May 2003) Fix for a problem 1.07 - 1.07 (1RET36WW/30 Jun 2003) Function update and fix for some problems 2.02 - 2.02 (1RET73WW/21 Aug 2003) Fix for a problem 2.06 - 2.06 (1RET79WW) Function update 2.10 - 2.10 (1RET83WW) Function update and fix for some problems 2.11 - 2.11 (1RET84WW/30 Oct 2003) Fix for a problem 2.13 - 2.13 (1RET86WW) Copyright string change 3.00 - 3.00 (1RETB7WW) Function update Summary of Changes ------------------ Where: n.nn : Diskette version x.xx : BIOS version bbbbbbbb : BIOS internal ID which is for administrator purpose. (New) New Function or Enhancement (Fix) Correction to existing function <1.02 - 1.02 (1RET31WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.02. - (New) Support for ThinkPad T40, T40p. <1.03 - 1.03 (1RET32WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.02. - (New) Support F11 key as it works as Access IBM button when Access IBM Predesktop Area exists. - (Fix) Fix hang up of Suspend and Hibernation in Windows 98 when HDD activity is pending. - (Fix) Change processor family value in SMBIOS for Intel Pentium M processor. <1.04 - 1.04 (1RET33WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.02. - (New) Function to disable the option ROM of internal Ethernet adapter card, in order to expand usable memory area by DOS. (This can be done by disabling the Internal Network Option ROM option under Config and Network in IBM BIOS Setup Utility.) - (Fix) (DOS) The screen becomes blank or white when Korean DOS environment starts up (by loading mshbios.com). - (Fix) Screen expansion (HV expansion) is always enabled if a power- on password or hard disk password is set. - (Fix) Some of Item Specific Help messages in IBM BIOS Setup Utility are incorrect. <1.05 - 1.05 (1RET34WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.02. - (Fix) Fix for SMBIOS maximum memory module information. <1.07 - 1.07 (1RET36WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.02. - (New) IBM Predesktop Area functionality update. - (Fix) IRQ setting in Dock cardbus controller. - (Fix) A hard disk password prompt for a second one(with password) which is hot swapped into a Windows 2000 or XP system comes up at system reboot. Note: A hard disk password should be entered at resume time from suspend after hot swapped into above systems. - (Fix) Fix for the problem of BIOS or Embedded Controller Program update by RDM. - (Fix) BIOS reports a memory map data area conflict due to BIOS requesting the same address space twice. - (Fix) Cardbus memory area conflict with 2GB system memory. - (Fix) POST error handling when unsupported daughter card exists. - (Fix) POST hang up when some of 2 USB devices are connected. - (Fix) (Windows XP) Some multi-function type of CardBus cards may not work after resuming normal operation from standby mode. - (Fix) Boot priority for the network boot does not become to the default setting, if an F9 key is pressed twice in IBM BIOS Setup Utility. - (Fix) IBM Predesktop Area setting was not copied by the Remote CMOS Update utility. - (Fix) Fix for early steppings of Intel(R) 855PM. <2.02 - 2.02 (1RET73WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.02. - (New) Support IBM 802.11a/b/g Wireless LAN Mini PCI Adapter. - (Fix) Thermal sensing improvement for Intel(R) 855PM. <2.06 - 2.06 (1RET79WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 2.03 (or higher). - (New) Support for ThinkPad T41 and R50. (Note) Refer to the Restrictions section. - (New) (Windows XP, Windows 2000) Enhancement on password security function. <2.10 - 1RET83WW> NOTE: This BIOS version will only work with Embedded Controller Program Version 2.04 (or higher). - (New) Support for ThinkPad T41p, R50p. (Note) Refer to the Restrictions section. - (Fix) Internal Network Option ROM setting was not restored by Setup Automation Tool. - (Fix) Inermittent font corruption after resume only in DOS. <2.11 - 1RET84WW> NOTE: This BIOS version will only work with Embedded Controller Program Version 2.04 (or higher). - (Fix) Intermittent screen garbage after resume only in DOS. <2.13 - 1RET86WW> NOTE: This BIOS version will only work with Embedded Controller Program Version 2.04 (or higher). - Copyright string change for year 2004. <3.00 - 1RETB7WW> NOTE: This BIOS version will only work with Embedded Controller Program Version 2.04 (or higher). - (New) Support for IBM Rescue and Recovery. - (New) Support for user-customized model number (for administrative purpose). - (New) Expand boot submenu (see "Startup Menu section" below) Updating System Program (BIOS) ------------------------------ Notes: - Remove the Power-on password prior to updating the system program (BIOS) in RDM (Remote Deployment Manager) environment or similar environment. - You need an AC adapter and a charged battery pack to update the system program (BIOS). - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. - Make sure the System Program Service Diskette is write-protected. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Insert the write protected System Program Service Diskette into the diskette drive and turn on the computer. 4. Select "Read this first" from the menu and carefully read the information that appears. 5. Press the "Esc" key to return to the menu. 6. Select "Update system program" and follow the instruction on the screen. Note: If you are updating the system program through the external diskette drive (USB type), it will take quite a long time to complete reading the system program file, but it is normal. Continue the update. Warning: Do not turn off, suspend the computer or remove the diskette until the update has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, the system is automatically turned off. Do the following to make sure the BIOS is updated correctly. 7. Make sure there is no diskette in the diskette drive, then turn on the computer. 8. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the "Access IBM" button. 9. Double-click "Start setup utility". The IBM BIOS Setup Utility menu will be displayed. If you have set a supervisor password, the IBM BIOS Setup Utility menu appears after you type in the password. The BIOS version and date are displayed on the first screen of the IBM BIOS Setup Utility. 9. Verify the BIOS version and date. 10. Turn off the computer. Initializing System Program (BIOS) ---------------------------------- In some cases, it may be a good idea to try BIOS initialization when you have some troubles. To initialize the BIOS setups: 1. Turn off the computer. 2. Make sure there is no diskette in the diskette drive. 3. Turn on the computer. 4. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the "Access IBM" button. 5. Double-click "Start setup utility". The "IBM BIOS Setup Utility" menu will be displayed. If you have set a supervisor password, the IBM BIOS Setup Utility menu appears after you enters the password. 6. Press "F9" key to load default configuration. 7. Select "Yes". 8. Press "F10" key to save default configuration and exit. 9. Select "Yes". NOTES: - After initialization you may need to re-apply some settings that you had changed previously. - After the initialization has been completed, the system restarts automatically. BIOS Information ---------------- Each version of the System Program Service Diskette contains the following system program (BIOS). Also the supported versions of Embedded Controller Program are shown bellow. The versions of BIOS and Embedded Controller Program can be viewed by running ThinkPad Configurator from your operating system and then selecting the System Information button, or by entering IBM BIOS Setup Utility. Diskette BIOS Version Embedded Controller Version (Internal ID) Program Version -------- ---------------- ------------------- 1.02 1.02 (1RET31WW) 1.02 1.03 1.03 (1RET32WW) 1.02 1.04 1.04 (1RET33WW) 1.02 1.05 1.05 (1RET34WW) 1.02 1.07 1.07 (1RET36WW) 1.02 2.02 2.02 (1RET73WW) 1.02 2.06 2.06 (1RET79WW) 2.03 (or higher) 2.10 2.10 (1RET83WW) 2.04 (or higher) 2.11 2.11 (1RET84WW) 2.04 (or higher) 2.13 2.13 (1RET86WW) 2.04 (or higher) 3.00 3.00 (1RETB7WW) 2.04 (or higher) To enter the IBM BIOS Setup Utility: 1. Make sure there is no diskette in the diskette drive, then turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the Access IBM button. 4. Double-click Start setup utility. The IBM BIOS Setup Utility menu will be displayed. If you have set a supervisor password, the IBM BIOS Setup Utility menu appears after you enters the password. 5. Check BIOS Version and Embedded Controller Version. 6. Turn off the computer. Memory Map Information ---------------------- Reserved Area: The following conventional memory addresses are reserved by the system program (BIOS) and others. C0000-CFFFF : Reserved for Video BIOS D0000-D3FFF : Reserved for Option ROM of Ethernet (*1) DC000-DFFFF : Reserved for USB BIOS (*2) E0000-FFFFF : Reserved for System BIOS (Note) *1: This area becomes free by disabling the Internal Network Option ROM option under Config and Network in IBM BIOS Setup Utility. This choice will disable PXE and WOL features. *2: This area becomes free by disabling the USB BIOS Support option under Config and USB in IBM BIOS Setup Utility. This choice does not affect using USB devices in Windows system. Usable Area: The following memory address can be used by the memory manager such as EMM386. D4000-DBFFF But certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System. Startup Menu ------------ Please check the order specified in the Boot and/or Network submenu. You may need to change the startup sequence of your computer. For example, if you have different operating systems on different devices, you can have the system start up from one of them. WARNING: After you change your startup sequence, you must be extremely careful not to specify a wrong device during a copy, a save, or a format operation. If you specify a wrong device, your data and programs might be erased or overwritten. - Changing the startup sequence NOTE: To change the startup sequence temporarily so that the system starts up from a different drive, do the following. When the message, "To interrupt normal startup, press the blue Access IBM button," appears at lower left on the screen, press F12. To change the startup sequence, do the following: 1. Click Boot or Network; then press Enter. 2. The Boot submenu sets the startup sequence when you turn the power switch on. Refer to "Boot submenu." 3. Select the device you want to start first. 4. Use these keys to set the order that the BIOS will use when starting an operating system: F6/F5: Move the device up or down. x: Exclude or include the device to boot. 1: Load the default boot sequence. 5. Press F10 to save the changes and restart the system. - The Boot submenu NOTES: - On your computer, the items listed in the submenu may be different from those shown in the example listing here. Your list shows the devices that are attached to your computer. - Each device type in the list above is always shown whether or not it is installed or attached. If a device is attached, the actual device information will be shown to the right of the device type. - ATAPI CD0 refers to an optical drive installed in the UltraBay Slim/Enhanced bay. - IDE HDD0 refers to the primary hard disk drive. - IDE HDD1 refers to a second hard disk drive installed in the UltraBay Slim/Enhanced. - PM : Primary Master - SM : Secondary Master Example listing: Boot priority order: <-- Startup devices candidate group 1: USB FDD: 2: ATAPI CD0: 3: USB CD: 4: IDE HDD0: 5: PCI LAN: 6: USB HDD: 7: IDE HDD1: Excluded from boot order: <-- Not to be startup devices group. : IDE HDD2: : ATAPI CD1: Priority for booting USB devices If you attach two or more USB devices of the same type to the computer (for example, two USB CD-ROM drives or two USB diskette drives), the computer starts the devices in accordance with the boot priority order specified for the USB connectors. If you are attaching your computer to a ThinkPad Dock II or a ThinkPad Mini Dock, the boot priority order for the USB connectors is as follows: 1. USB connector1 on the ThinkPad Dock II or the ThinkPad Mini Dock 2. USB connector2 on the ThinkPad Dock II or the ThinkPad Mini Dock 3. USB connector3 on the ThinkPad Dock II or the ThinkPad Mini Dock 4. USB connector4 on the ThinkPad Dock II or the ThinkPad Mini Dock 5. Lower USB connector on the ThinkPad computer 6. Upper USB connector on the ThinkPad computer If you are attaching your computer to a ThinkPad Port Replicator II, the order is as follows: 1. USB connector on the ThinkPad Port Replicator II 2. Lower USB connector on the ThinkPad computer 3. Upper USB connector on the ThinkPad computer If you are using USB connectors on your computer only, without attaching the computer to a ThinkPad Dock II, a ThinkPad Mini Dock, or a ThinkPad Port Replicator II, the order is as follows: 1. Lower USB connector on the ThinkPad computer 2. Upper USB connector on the ThinkPad computer Restrictions ------------ (For ThinkPad T41, T41p, R50 and R50p) Passwords can be set with passphrase feature, however, that supports Windows 2000 and Windows XP only. Windows 98, Windows NT 4.0 and OS/2 are not supported. Trademarks ---------- * IBM, OS/2 and ThinkPad are registered trademarks of IBM Corporation. * Intel and Pentium are registered trademarks of Intel Corporation. * Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.