IBM ThinkPad                                                   Dec. 4, 1997
CardWizard for Windows NT Driver Diskette Version 2.02.30
==========================================================

**************************************************************************
WARNING

THIS DRIVER IS ONLY ALLOWED TO USE WITH THE MACHINES IN THE SUPPORTED LIST
IN THIS PAGE. IT IS STRICTLY RESTRICTED TO USE WITH THE OTHER MACHINES.
**************************************************************************

What This Diskette Does
-----------------------

This diskette provides PC Card software for Windows NT4.0 environment

The following models are supported:
* ThinkPad 380/380D/385D,380E/380ED/385ED

Released Versions
-----------------

Version 1.10      Initial Release
Version 2.02.30   - ThinkPad 380E/380ED/385ED Support
                  - A Problem Fix                    
                  

Summary of Changes
------------------

Key:    <n.nn.nn> Diskette version (For example, 1.00.01 means Version 1.00.01)
        (new) New function or enhancement
        (fix) Correction to existing function

<2.02.30>
        (new) Support for ThinkPad 380E/380ED/385ED.
        (fix) IBM CD-400 PC Card CD-ROM drive does not work.


Installation Procedure
-----------------------

  1. If you have any PC cards currently installed in PC card slot,
     remove them.
  2. You must be logged onto Windows NT as Administrator.
  3. Insert the CardWizard for Windows NT diskette into a diskette
     drive.
  4. From Windows NT, select Run from the Start button and type
     "a:setup" and press ENTER.
  5. Follow the instructions on the screen.


Un-installation Procedure
-------------------------

  1. You MUST have administrator privileges in order to un-install
     CardWizard for Windows NT.
  2. From the Start Menu, the Explorer, or from a DOS prompt, run 
     setup.exe in the CardWizard directory, and follow the
     instructions on the screen.

     This will remove CardWizard for Windows NT and restore the
     original Windows NT PCMCIA support which was saved in the
     CardWizard installation directory.

  Note: Setup.exe will remove CardWizard for Windows NT, if it was 
        installed.  If there is NO CardWizard for Windows NT installed,
        the setup.exe will INSTALL CardWizard for Windows NT.