IBM ThinkPad i Series August 30, 2000 PCMCIA Utility for Windows Me Version 1.42 =================================================================== What This Diskette Does ----------------------- PCMCIA Utility for Windows Me enables or updates the PCMCIA Features program of the following ThinkPad computers: - ThinkPad i Series 1400 NOTE: Only the following Model/Type numbers are supported: 2611 - 434, 435, (41x's except 412), (45x's except 452 and 456) Released Version ---------------- Version 1.42 Initial release Summary of Changes ------------------ <1.42> - (New) Support for ThinkPad i Series 1400 Installation Instructions ------------------------- 1. Turn on your computer, and then logon to Windows Me. 2. Locate the downloaded PCMCIA Setup Utility for Windows Me package and double-click it to extract the setup files to your system hard disk drive. 3. Click Start, then click Run. 4. Type C:\default_subdirectory\O2SETUP.EXE in the Open box, where C:\default_subdirectory is the path to the files you extracted in the previous step. 5. Press the Enter key after providing the correct path. 6. Select Install, then restart at the O2Micro Setup Program dialog box. 7. The system will reboot and Add New Hardware Wizard appears and select Specify the location of the driver Advanced. 8. Click Next and select Display a list of all the drivers in a specific location, so you can select the driver you want. 9. Select Have Disk and specify your subdirectory\winme you extracted the files. 10. Select O2Micro OZ6832/6833/6933 CardBus Controller O2Micro 6-8-2000(!It is listed at the bottom of the list!) and click Next. 11. Click Next for \your subdirectory\winme\o2mcbme.inf. Make sure that o2mcbme.inf is selected. 12. Click Finish and select No for System Settings Change. 13. Repeat same operation from 7 to 12. 14. Select Yes for System Settings Change to restart the system. Trademarks ---------- IBM and ThinkPad are trademarks of IBM Corporation. Windows is a trademark of Microsoft Corporation.