IBM ThinkPad i Series May 31, 1999 PCMCIA Utility for Windows 98 Version 1.34 =============================================================== What This Diskette Does ----------------------- PCMCIA Utility for Windows 98 enables or updates the PCMCIA Features program of the following ThinkPad computers: - ThinkPad i Series 1400 NOTE: Only the following Model/Type numbers are supported: 2611 - 434, 435, (41x's except 412), (45x's except 452 and 456) Released Version ---------------- Version 1.34 Problem fixes Version 1.32 Initial release Summary of Changes ------------------ <1.34> - (Fix) Cannot recognise some memory PCMCIA cards. <1.32> - (New) Support for ThinkPad i Series 1400 Installation Guide ------------------ 1. After booting up Windows 98, extract the PCMCIA Utility onto the hard disk. 2. Click on Start -> Run... 3. Type C:\DRIVERS\W98\PCCARD\O2SETUP.EXE in the dialog box and click OK. 4. Select Install, then restart. Click OK to restart the system. 5. When the Add New Hardware Wizard appears during the startup of Windows 98, click on Next. 6. It will default to Search for the best driver for your device. Click on Next. 7. Select the Specify a location option. Type C:\DRIVERS\W98\PCCARD\W98 and click on Next. 8. It will then identify the device as a O2Micro OZ6832/6833 CardBus Controller. Click on Next to continue. 9. The system will begin copying files. If system prompts you to insert a diskette, type "C:\DRIVERS\W98\PCCARD\W98". If system prompts you for a Windows 98 CD, type C:\WINDOWS\OPTIONS\CAB for the location. When copying completes, click on Finish. It will show the Add New Hardware Wizard again. Repeat steps 5 - 7. 10. Click on Finish. Click on Yes to restart. Trademarks ---------- IBM and ThinkPad are trademarks of IBM Corporation. Windows is a trademark of Microsoft Corporation.