IBM ThinkPad                                              December 20, 1999
PC Card Feature for SelectaDock I/II

Version 1.04
==========================================================

**************************************************************************
WARNING

THIS DRIVER CAN ONLY BE USED WITH THE MACHINES ON THE SUPPORTED LIST
ON THIS PAGE.
USE OF THESE DRIVERS WITH ANY OTHER MACHINE IS STRICTLY PROHIBITED.
**************************************************************************


What This Package Does
-----------------------
This package provides to enable hot insertion/removal of PC Card
on SelectaDock I or SelectaDock II under Windows 98 / Windows 95 OSR2
environment.

This release supports the following systems:
- ThinkPad 600, 600E, 600X
- ThinkPad 770, 770E, 770ED, 770X, 770Z


Released Versions
-----------------
Version 1.00 / Date  5-26-1998 : Initial Release
Version 1.01 / Date  7-13-1998 : Support ThinkPad 600, 600E, 770X, 770Z
Version 1.04 / Date  8- 9-1999 : Support ThinkPad 600X


Summary of Changes
------------------
Where:  <n.nn.nn> Package version
                  (For example, 1.00.01 means Version 1.00.01)
        (New)     New function or enhancement
        (Fix)     Correction to existing function

<1.01>
 - (Fix) At installation time of this driver, a meaningless operation
         was required.

<1.04>
 - (New) Support ThinkPad 600X.
 - (New) Support Windows 95 OSR2.


Who needs to install the PC Card Feature for SelectaDock I/II ?
--------------------------------------------------------------
 Windows 95 OSR2 and Windows 98 does not support PC Card slot in
 SelectaDock I/II. This driver enables you to use the PC Card slot
 under Windows 95 OSR2 and Windows 98.


Installation Procedure
----------------------
 1. Start Windows 95/98.
 2. Extract the drivers onto the hard drive.
 3. Click on 'Start' -> 'Settings' -> 'Control Panel'.
 4. Open "Add New Hardware" and click "Next" twice.
 5. If Windows 98 shows device list, select "No" and click "Next".
 6. Select "No" and click "Next" since this driver should be manually
    installed.
 7. Select "System devices" and click "Next".
 8. Click "Have Disk ...".
 9. Open the directory that this package is extracted.
    Default path is C:\DRIVERS\W9X\PCCARD
10. Windows shows this driver name "PC Card Feature for SelectaDock I/II".
    Then click "Next".
11. Follow the messages on the screen and when prompted, reboot the system.


Uninstallation procedure
------------------------
 1. Make sure all of PC Cards are removed from PC Card slots on system
    and docking station.
 2. Click on 'Start' -> 'Settings' -> 'Control Panel'.
 3. Open the "System" icon and click on the "Device Manager" tab.
 4. Expand the "System" section and select "PC Card Feature for
    SelectaDock I/II".
 5. Click "Remove" button.
 6. Reboot the system.


What files are contained in this package ?
------------------------------------------
   tpssctrl.vxd       - The driver.
   ibmtphw.inf        - An INF file needed to install this driver.


Known Limitations
-----------------
 1. CardBus cards do not work in SelectaDock I/II.

 2. IRQ 3 and 4 are not usable for PC Cards in SelectaDock I/II.

 3. RI resume is not supported in SelectaDock I/II.

 4. Unattended install is not supported.

 5. Hot/Warm undock is not supported.
    You should shut down the system, when you remove the system from
    SelectaDock I/II.

 6. Suspend/Hibernation is not supported.
    You should not enable suspend or hibernation with SelectaDock I/II.
    (Keep "Suspend/Hibernate while docked" is unchecked in ThinkPad Utility.)


How to determine what version is installed
------------------------------------------
 1. Open 'Device Manager'
 2. Click 'System Devices' and Select 'PC Card Feature for SelectaDock I/II'
 3. Double Click it.
    Then 'PC Card Feature for SelectaDock I/II Properties' appears.
 4. Click 'Driver' tab.
 5. Check 'Date :' field.
 6. The following describes the mapping table between version and the date.


Trademarks
----------
IBM and ThinkPad are trademarks of IBM Corpora