PC-Doctor for IBM Thinkpad                           August 1, 2001

Version 3.1.611
=========================================================================

This build is intended for use on IBM ThinkPad 1200/1300 models running
a Microsoft Windows 95/98/Me/NT/2000. It contains an automated
installation routine which will select the correct operating system
files and language (if available) for the installed OS.

This build is intended to correct an erroneous failure of the CMOS
diagnostic on machines containing a "Geyserville" processor and
utilizing the Intel SpeedStep tool.  The SpeedStep incorrectly
intercepted the PC Doctor diagnostic commands and caused errors
to be reported, when in fact none existed.

This release supports selected models of the following IBM systems:
- ThinkPad 130, type 1171-51J, 61J, 71J, 81J, BM1, VR2
- ThinkPad i Series 1200, 1300:
  type 1161 - 11A, 11C, 11F, 11G, 11H, 11K, 11M, 11P, 11S, 11T, 11U,
              11X, 11Y, 41A, 41C, 41F, 41G, 41H, 41J, 41K, 41M, 41P,
              41S, 41T, 41U, 41X, 41Y, 51F, 51G, 51J, 51P, 51S, 51U,
              51X, 61A, 61C, 61H, 61K, 61M, 61T, 61Y, 71A, 71C, 71F,
              71G, 71H, 71J, 71K, 71M, 71T, 71U, 71Y, 91A, 91C, 91H,
              91J, 91K, 91M, 91T, 91Y, 36N, 46N, 56N, 66N, 1SG, 3MS,
              3MX, 4JJ, 5SG, BB6, T1M, MTU, RR5, RR6, RR7, RR8

  Type 1171 - 1U, 2AU, 61F, 61G, 61M, 61U, 71U, 81M, 81G, 91F, 91U,
              BB6, I1G, I1U, RR6, RR7, RR8, RR9, RRA

NOTE: Your machine type and model number can be found on the bottom
      of the system, next to the bar code label.

It is recommended that any previous installations of PC Doctor
for Windows be uninstalled prior to installation of PC Doctor
Windows version 3.1.611.

Summary of changes
------------------
version 3.1.611
- Fixed CPU speed reporting issue under Windows 2000
- Fixed CMOS issue on Geyserville
- Changed start menu links to reflect the correct operating
  system (Windows NT vs Windows 2000)


Uninstall instructions
----------------------
1. Click START, select PROGRAMS, select PC DOCTOR, then click UNINSTALL
   PC DOCTOR. NOTE: depending on your OS, text may read "PC Doctor for
                    Windows", "PC Doctor for Windows 2000", or a similar
                    variation.
2. Select Automatic Uninstall, and click the "NEXT" button
3. Select "FINISH" to begin uninstallation
4. If a warning to remove shared components appears, they may be removed
   if desired. Any shared components will be overwritten if PC Doctor is
   reinstalled or upgraded.


Installation instructions
-------------------------
It is recommended that any previous installations of PC Doctor
for Windows be uninstalled prior to installation of PC Doctor
Windows version 3.1.611.

 1. Start Windows 95/98/Me/2000/NT. If using Windows NT or 2000, logon
    with administrative privileges.
 2. Extract the drivers to the hard disk drive.
 3. Click Start, then click Run.
 4. In the Open field, type "C:\DRIVERS\WIN\PCDR\SETUP.EXE" to
    install the PC Dr files. Click the 'OK' button to start the
    installation process. If you extracted the files to a different
    location, specify that location instead.
 5. Follow the installation screens, pressing enter to accept
    the defaults.
 6. When install completes, PC Doctor is ready to run.  No reboot
    is necessary. Temporary folder may be removed if desired.