**************************************************************************** * IBM ThinkPad March 8, 2005 * * Intel Chipset Support III for Windows 98 SE/2000/XP * * Version 4.30.1006 * **************************************************************************** Notice: ------- - If you use the Product Recovery function shipped with your ThinkPad to restore the Windows preload environment, you do not need this package. This package is required when you install Windows Operating Systems without the Product Recovery function. - This program is based on the US version but, this is language independent and can be used with any language system. **************************************************************************** * CONTENTS OF THIS DOCUMENT * **************************************************************************** This document contains the following sections. 1. What This Package Does 2. Installing the Software in Interactive Mode 3. Installing the Software in Silent Mode 4. Installing the INF Files Prior to OS Installation 4A. Installing the Windows 2000/XP INF Files Prior to OS Installation 4B. Installing the Windows 98SE INF Files Prior to OS Installation **************************************************************************** * 1.WHAT THIS PACKAGE DOES * **************************************************************************** This package contains following support modules. - To detect and configure the INTEL 82852/82855 GM/GME Chipset The following ThinkPad computers are supported: - ThinkPad G40/G41(*1) - ThinkPad R50e(*1) - ThinkPad R51(Machine Type 2883,2887,2888,2889,2894 and 2895)(*1) - ThinkPad X40(*1) NOTE: *1: Only Windows 2000/XP are supported. To determine if you should update the supplement files, refer to the "Summary of Changes" section. To update the supplement files, refer to the "Installation Instructions" section. Released Versions ----------------- Version 1.00 Initial release Version 1.01 Update Version 4.30.1006 No update, but change of only the version notation Summary of Changes ------------------ Where: < > Version (New) New function or enhancement (Fix) Correction to existing function <1.00> - (New) Detect and Configure INTEL 82852/82855 GM/GME Chipset. <1.01> - (New) Update for ThinkPad Software Installer Support <4.30.1006> - No update from version 1.01. Only the version notation was changed from 1.01 to 4.30.1006, in order to unite with the version notation of Intel. File versions ------------- infinst_autol.exe 01/21/2003 14:30 ibmtpi.xml 08/26/2004 16:24 **************************************************************************** * 2. INSTALLING THE SOFTWERE IN INTERACTIVE MODE * **************************************************************************** Apply this program to enumerate INTEL chipset correctly after installing base operating system with each supplement files. Installation : 1. Close any running applications. 2. Run the InstallShield* installation program in INTELINF folder. Windows XP/2000: INFINST_autol.exe Windows 98 SE: INFINST_autol.exe -a -USB2 3. You will be prompted to agree to the license agreement. If you do not agree, the Installer will exit before extracting any files. 4. Follow the on-screen instructions and use the default settings to complete the setup, once the operating system has rebooted. 5. This completes the installation of the Intel(R) Chipset Software Installation Utility. **************************************************************************** * 3. INSTALLING THE SOFTWERE IN SILENT MODE * **************************************************************************** Unattended installation (common for Windows 98 SE/2000/XP): Run infinst_autol.exe with the command line flags as follows. Windows XP/2000: INFINST_autol.exe -a -s Windows 98 SE: INFINST_autol.exe -a -s -USB2 **************************************************************************** * 4. INSTALLING THE INF FILES PRIOR TO OS INSTALLATION * **************************************************************************** How to extract Windows INF files prior to OS installation: 1. Click Start and then click Run. 2. In the Open field, type infinst_autol.exe -a -a -p C:\INTEL. 3. Click OK. Setup Screen (INTEL Chipset Software Installation Utility) appears. NOTE: This stage just runs the installShield program and does not extract the INF and CAT files. 4. Click Next in Welcome to the InstallShield Wizard for. 5. Click Yes to Accept License Agreement. 6. Click Next at ReadMe Information screen. The progress bar shows the extract status. After reaching 100%, the INF and CAT files have been extracted in C:\INTEL folder. 7. Check C:\INTEL folder. The "ICH4-M" folder and others should be in C:\INTEL directory. 8. The INF and CAT files can be used from the Win2000, Win98, Win98SE, XP folders for installation. 9. The subdirectory that you want to use is C:\INTEL\ICH4-M\. **************************************************************************** * 4A. INSTALLING THE WINDOWS 2000/XP INF FILES PRIOR TO OS INSTALLATION * **************************************************************************** Windows 2000/XP 1. Create the following directory structure under the WINDOWS Setup Directory: \$OEM$\$$\INF 2. Copy the Windows INF files from the the following folder to the directory created in Step 1 above. Windows 2000: C:\INTEL\ICH4-M\Win2000 Windows XP: C:\INTEL\ICH4-M\XP 3. Create the following directory structure under the WINDOWS Setup Directory: \$OEM$\$1\drivers\IntelINF 4. Copy the Windows INF files and the catalog files (.CAT) from the folder listed in step 2 to the directory created in Step 3 above. 5. Either modify the default Windows installation answer file, UNATTEND.TXT, located in WINDOWS Setup Directory, or create a customized answer file. The answer file must include the following information: [Unattended] OemPreinstall = Yes OemPnPDriversPath="drivers\IntelINF" 6. Run WINNT.EXE /u:answer file name /s:WINDOWS Setup Directory" to install Windows. **************************************************************************** * 4B. INSTALLING THE WINDOWS 98SE INF FILES PRIOR TO OS INSTALLATION * **************************************************************************** Windows 98 SE 1. Copy the Windows 98 Second Edition INF Files from C:\INTEL\ICH4-M\Win98SE to Windows setup directory. 2. Depending on your Windows Setup Directory content, there are two cases: Case A: CUSTOM.INF file is NOT present in the Windows Setup Directory. In this case, rename INFPRELO.INF to CUSTOM.INF. Case B: CUSTOM.INF is present in the Windows Setup Directory. In this case, incorporate the content of INFPRELO.INF into the existing CUSTOM.INF file. 3. Run SETUP.EXE to install Windows. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Intel is a registered trademark of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.