IBM ThinkPad October 31, 2001 Intel(R) PRO/100 SP Mobile Combo Adapter Software (Ethernet driver) for DOS, Windows 95/98/Me/NT 4.0/2000/XP Release (Build 28811) ====================================================================== Notice: ------- This program is language independent and can be used with any language system. What This Package Does ---------------------- This package provides the Ethernet driver for DOS, Windows 95/98/Me and Windows NT 4.0/2000/XP. The Ethernet driver enables or updates the Ethernet function of the following ThinkPad computers with the following adapters -Intel (R) PRO/100 SP Mobile SP Combo Adapter -IBM 10/100 EtherJet Mini-PCI Adapter with 56K Modem -Intel MiniPCI Ethernet Card. This release supports the following systems: - ThinkPad A21e Model 2655 - Thinkpad A22e, A22m, A22p - Thinkpad T22 - Thinkpad X21 - ThinkPad i Series 1800(*1) NOTE *1: Japanese models only (Windows 2000 and Me support only). The DOS driver is included only for unattended installation purpose. The Modem drivers are available in a separate package. To determine if you should update the Ethernet driver, refer to the "Summary of Changes" section. To update the Ethernet driver, refer to the "Installation Instructions" section. Released Versions ----------------- Release (Build 21246) -Initial release Release (Build 23740) -Support for A22e Release (Build 28811) -Intel Packet Protect problem fix -Windows NT 4.0 driver fix when connecting to a RAS server through the modem, if network drive is mapped, the modem connection will be disconnected. -Windows XP support Summary of Changes ------------------ Where: Build number (for example, 21246 means Build 21246) (New) New function or enhancement (Fix) Correction to existing function <21246> - (New) Initial release for ThinkPad A21e Model Type 2655. <23740> - (Fix) Added help information for Priority Packet - (New) Support for A22e <28811> - (Fix) After installing Intel Packet Protect and enabling it, network communication fails after resuming from suspend or hibernation mode under Windows 98 and Me. - (Fix) Windows NT 4.0 driver when connecting to a RAS server (Remote Access Server) through the modem, if a network drive is mapped, the modem connection will be disconnected. - (New) Windows XP support Installation Instructions ------------------------- For the additional detailed information, refer the Intel (R) PRO/100 SP Mobile SP Combo Adapter User's Guide. (Intel(R) PRO/100 SP Mobile Combo Adapter) The name of the Ethernet device driver is Intel(R) PRO/100 SP Mobile Combo Adapter in the Device Manager and in the Network Control Panel. Hereafter, IBM 10/100 EtherJet Mini-PCI Adapter with 56K Modem (Intel MiniPCI Ethernet/Modem Combo Card) and Intel MiniPCI Ethernet Card are referred as Intel(R) PRO/100 SP Mobile Combo Adapter. Windows 95 NOTICE: Device drivers are located in Win9x subdirectory for Windows 95, 98, and Me. UPDATE INSTALL: To update the driver, 1. Start Windows 95. 2. Extract this package onto the hard disk drive. 3. Click Start, point to Settings, then click Control Panel. 4. Double-click System icon. 5. Click Device Manager tab. 6. Click the + mark to expand Network adapters. 7. Click Intel(R) PRO/100 SP Mobile Combo Adapter. 8. Click Properties button. 9. Click Driver tab. 10. Click Update Driver button. 11. Select Yes (Recommended) to Do you want Windows to search for the driver?. 12. Click Next button. 13. Click Other Locations button. 14. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 2 in Location. 15. Click OK button. 16. Click Finish button. CLEAN INSTALL: (Update Device Driver Wizard) If this is the first boot of Windows 95 after installing the Intel MiniPCI Card in the computer, Windows 95 detects the card automatically. To install the device driver, follow the instructions below. 1. Extract this package onto the hard disk drive. 2. Start Windows 95. 3. It displays Update Device Driver Wizard dialog box. 4. Click Next button. 5. Click Other Locations button. 6. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 1 in Location, and click OK. 7. Click Finish button. 8. It displays Insert Disk dialog box. Click the OK button. 9. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 1 in Copy files from:, and click OK button. 10. Follow the instructions displayed on the screen to configure network settings. 11. Follow the prompts for any Windows 95 installation disks by typing the path to the directory that contains Windows 95 files. 12. Click Yes when prompted to restart the computer. CLEAN INSTALL: (PCI Ethernet Controller in Other devices) Windows 95 detected the PCI Ethernet Controller, but was not able to find the correct device driver. In this case, you will see PCI Ethernet Controller in Other devices in Device Manager. To install the driver, follow the instructions below. 1. Start Windows 95. 2. If not yet, extract this package onto the hard disk drive. 3. Click Start, select Settings, then click Control Panel. 4. Double-click System icon. 5. Click Device Manager tab. 6. Click the + mark to expand Other devices. 7. Click PCI Ethernet Controller. 8. Click Properties button. 9. Click Driver tab. 10. Click Update Driver button. 11. Select Yes (Recommended) to Do you want Windows to search for the driver?. 12. Click Next button. 13. Click Other Locations button. 14. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 2 in Location, and click OK. 15. Click Finish button. 16. It displays Insert Disk dialog box. Click OK button. 17. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 2 in Copy files from:. 18. Click OK button. 19. Follow the instructions displayed on the screen. 20. Restart the computer. Windows 98 NOTICE: Device drivers are located in Win9x subdirectory for Windows 95, 98, and Me. UPDATE INSTALL: To update the driver, 1. Start Windows 98. 2. Extract this package onto the hard disk drive. 3. Click Start, point to Settings, then click Control Panel. 4. Double-click System icon. 5. Click Device Manager tab. 6. Click the + mark to expand Network adapters. 7. Right-click Intel (R) PRO/100 SP Mobile SP Combo Adapter in Network adapters and click Properties. 8. Click Driver tab. 9. Click Update Driver button. 10. Click Next button in Update Device Driver Wizard dialog box. 11. Select Search for a better driver than the one your device is using now.(Recommended). 12. Click Next button. 13. Select Specify a location: only. 14. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 2 in Specify a location:. 15. Click Next button. 16. Click Next button. 17. Click Next button. The driver installation starts. 18. Click Finish button when the installation completes. 19. Click Yes when prompted to restart the computer. CLEAN INSTALL: (Add New Hardware Wizard) If this is the first boot of Windows 98 after installing the Intel MiniPCI Card in the computer, the Windows 98 detects the card automatically. To install the device driver, follow the instructions below. 1. Extract this package onto the hard disk drive. 2. Start Windows 98. 3. It displays Add New Hardware Wizard dialog box. 4. Click Next button. 5. Select Search for the best driver for your device (recommended). 6. Click Next button. 7. Select Specify a location: only. 8. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 1 in Specify a location:. 9. Click Next button. 10. Click Next button. 11. Click Next button. The driver installation starts. 12. Click Finish button when the installation completes. 13. Click Yes when prompted to restart the computer. CLEAN INSTALL: (PCI Ethernet Controller in Other devices) Windows 98 detected the PCI Ethernet Controller, but was not able to find the correct device driver. In this case, you will see Ethernet Controller in Other devices in Device Manager. To install the driver, follow the instructions below. 1. Start Windows 98. 2. If not yet, extract this package onto the hard disk drive. 3. Click Start, select Settings, then click Control Panel. 4. Double-click System icon. 5. Click Device Manager tab. 6. Right-click PCI Ethernet Controller in Other devices and click Properties. 7. Click Driver tab. 8. Click Update Driver button. 9. Click Next button in Update Device Driver Wizard dialog box. 10. Select Search for a better driver than the one your device is using now(recommended). 11. Click Next button. 12. Select Specify a location: only. 13. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 2 in Specify a location:. 14. Click Next button. 15. Click Next button. 16. Click Next button. The driver installation starts. 17. Click Finish button when the installation completes. 18. Click Yes when prompted to restart the computer. Windows Me NOTICE: Device drivers are located in Win9x subdirectory for Windows 95, 98, and Me. UPDATE INSTALL: To update the driver, 1. Start Windows Me. 2. Extract this package onto the hard disk drive. 3. Click Start, point to Settings, then click Control Panel. 4. Click view all Control Panel options link. 5. Double-click System icon. 6. Click Device Manager tab. 7. Click the + mark to expand Network adapters. 8. Right-click Intel (R) PRO/100 SP Mobile SP Combo Adapter in Network adapters and click Properties. 9. Click Driver tab. 10. Click Update Driver button. 11. Select Specify the location of the driver (Advanced). 12. Click Next button in Update Device Driver Wizard dialog box. 13. Place a check mark on Specify a location: only. 14. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 2 in Specify a location:. 15. Click Next button. 16. Click Next button. 17. Click Next button. The driver installation starts. 18. Click Finish button when the installation completes. 19. Click Yes when prompted to restart the computer. CLEAN INSTALL: (Add New Hardware Wizard) If this is the first boot of Windows Me after installing the Intel MiniPCI Card in the computer, the Windows Me detects the card automatically. To install the device driver, follow the instructions below. 1. Extract this package onto the hard disk drive. 2. Start Windows Me. 3. It displays Add New Hardware Wizard dialog box. 4. Select Specify the location of the driver (Advanced). 5. Click Next button. 6. Place a check mark on Specify a location: only. 7. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 1 in Specify a location:. 8. Click Next button. 9. Click Next button. 10. Click Next button. The driver installation starts. 11. Click Finish button when the installation completes. 12. Click Yes when prompted to restart the computer. CLEAN INSTALL: (PCI Ethernet Controller in Other devices) Windows Me detected the PCI Ethernet Controller, but was not able to find the correct device driver. In this case, you will see PCI Ethernet Controller in Other devices in Device Manager. To install the driver, follow the instructions below. 1. Start Windows Me. 2. If not yet, extract this package onto the hard disk drive. 3. Click Start, select Settings, then click Control Panel. 4. Click view all Control Panel options link. 5. Double-click System icon. 6. Click Device Manager tab. 7. Right-click PCI Ethernet Controller in Other devices and click Properties. 8. Click Driver tab. 9. Click Update Driver button. 10. Select Specify the location of the driver (Advanced). 11. Place a check mark on Specify a location: only. 12. Specify the path to sub-directory Win9x with the full path name where you extracted the package in the step 2 in Specify a location:. 13. Click Next button. 14. Click Next button. 15. Click Next button. The driver installation starts. 16. Click Finish button when the installation completes. 17. Click Yes when prompted to restart the computer. Windows NT 4.0 UPDATE INSTALL: To update the device driver and power management driver, Ethernet Device Driver 1. Start Windows NT 4.0. 2. Extract this package onto the hard disk drive. 3. Click Start, point to Settings, then click Control Panel. 4. Double-click Network icon. 5. Click Adapters tab. 6. Select Intel (R) PRO/100 SP Mobile SP Combo Adapter. 7. Click Update button. 8. Specify the directory name with the full path name where you extracted the package in the step 2 in Insert Disk dialog box. 9. Click Continue button. 10. Click Close button. 11. Click Yes when prompted to restart the computer. Ethernet Power Management Driver (NDIS PM Interface) a. Start Windows NT 4.0. b. Click Start, point to Settings, then click Control Panel. c. Double-click Network icon. d. Click Services tab. e. Select NDIS PM Interface. f. Click Update button. g. Specify the path to sub-directory NPMINT40 of the directory that contains the driver in the step 2 in Windows NT Setup dialog box. h. Click Continue button. i. Click Close button. j. Click Yes when prompted to restart the computer. CLEAN INSTALL: Ethernet Device Driver 1. Start Windows NT 4.0. 2. Extract this package onto the hard disk drive. 3. Click Start, point to Settings, then click Control Panel. 4. Double-click Network icon. 5. It displays Network Configuration dialog box if this is the first time to configure the Network. If not, go to step 21. First Network Configuration 6. Click Yes button. 7. Select Wired to the network. 8. Click Next button. 9. Click Select from list button. 10. Click Have Disk button. 11. Specify the directory name with the full path name where you extracted the package in the step 2 in Insert Disk dialog box. 12. Click OK button. 13. Select Intel(R) PRO Adapter. 14. Click OK button. 15. Click Next button. 16. Follow the instructions displayed on the screen. 17. Follow the prompts for any Windows NT installation disks by typing the path to the directory that contains Windows NT files. (It is usually c:\i386 directory or Windows NT CD-ROM's x:\i386 directory.) 18. Follow the instructions displayed on the screen. 19. Click Finish button when the installation completes. 20. Click Yes when prompted to restart the computer. Add Ethernet to Network Configuration 21. Click Adapters tab. 22. Click Add button. 23. Click Have Disk button. 24. Specify the directory name with the full path name where you extracted the package in the step 2 in Insert Disk dialog box. 25. Click OK button. 26. Select Intel(R) PRO Adapter. 27. Click OK button. 28. Click Close button. 29. Follow the instructions displayed on the screen. 30. Click Yes when prompted to restart the computer. Ethernet Power Management Driver (NDIS PM Interface) a. Start Windows NT 4.0. b. Click Start, point to Settings, then click Control Panel. c. Double-click Network icon. d. Click Protocols tab. e. Click Add button. f. Click Have Disk button. g. Specify the path to sub-directory NPMINT40 of the directory that contains the driver in the step 2 in Insert Disk dialog box. h. Click OK button. i. Select NDIS PM Interface. j. Click OK button. k. Click Close button. l. Click Yes when prompted to restart the computer. Windows 2000 UPDATE INSTALL: To update the driver, 1. Start Windows 2000. 2. Extract this package onto the hard disk drive. 3. Click Start, point to Settings, then click Control Panel. 4. Double-click System icon. 5. Click Hardware tab. 6. Click Device Manager button. 7. Click the + mark to expand Network adapters. 8. Right-click Intel (R) PRO/100 SP Mobile SP Combo Adapter in Network adapters and click Properties. 9. Click Driver tab. 10. Click Update Driver button. 11. Click Next button in Upgrade Device Driver Wizard dialog box. 12. Select Search for a suitable driver for my device (recommended). 13. Click Next button. 14. Select Specify a location only in Optional search locations:. 15. Click Next button. 16. Specify the directory name with the full path name where you extracted the package in the step 2 in Copy manufacturer's files from:. 17. Click OK button. 18. Click Next button. (After this step, the installer may say a Digital Signature not found message. Simply answer Yes if this message appears). The driver installation starts. 19. Click Finish button when the installation completes. 20. Restart the computer. CLEAN INSTALL: (Found New Hardware Wizard) If this is the first boot of Windows 2000 after installing the Intel MiniPCI Card in the computer, the Windows 2000 detects the card automatically. To install the device driver, follow the instructions below. 1. Extract this package onto the hard drive. 2. Start Windows 2000. 3. It displays Found New Hardware Wizard dialog box. 4. Click Next button. 5. Select Search for a suitable driver for my device (recommended). 6. Click Next button. 7. Select Specify a location only in Optional search locations:. 8. Click Next button. 9. Specify the directory name with the full path name where you extracted the package in the step 1 in Copy manufacturer's files from:. 10. Click OK button. 11. Click Next button. (After this step, the installer may say a Digital Signature not found message. Simply answer Yes if this message appears). The driver installation starts. 12. Click Finish button when the installation completes. 13. Restart the computer. CLEAN INSTALL: (Ethernet Controller in Other devices) Windows 2000 detected the Ethernet Controller, but was not able to find the correct device driver. In this case, you will see Ethernet Controller in Other devices in Device Manager. To install the driver, follow the instructions below. 1. Start Windows 2000. 2. If not yet, extract this package onto the hard disk drive. 3. Click Start, point to Settings, then click Control Panel. 4. Double-click System icon. 5. Click Hardware tab. 6. Click Device Manager button. 7. Right-click Ethernet Controller in Other devices and click Properties. 8. Click Driver tab. 9. Click Update Driver button. 10. Click Next button in Upgrade Device Driver Wizard dialog box. 11. Select Search for a suitable driver for my device (recommended). 12. Click Next button. 13. Select Specify a location only in Optional search locations:. 14. Click Next button. 15. Specify the directory name with the full path name where you extracted the package in the step 2 in Copy manufacturer's files from:. 16. Click OK button. 17. Click Next button. (After this step, the installer may say a Digital Signature not found message. Simply answer Yes if this message appears). The driver installation starts. 18. Click Finish button when the installation completes. 19. Click Yes when prompted to restart the computer. Windows XP UPDATE INSTALL: Note: Windows XP contains a native driver for Ethernet and it is loaded automatically. If you need to update the driver, follow the instructions below: To update the driver, 1. Start Windows XP. 2. Open Device Manager in Control Panel. (Click Start, then Control Panel, Switch to Classic View, click System, then Hardware, then Device Manager) 3. Click the + mark to expand Network adapters. 4. Open Properties of Intel(R) PRO/100 SP Mobile Combo Adapter in Network adapters and click the Driver tab. 5. Click Update Driver. 6. Select Install from a list or specific location (Advanced), click Next. 7. Select Search for the best driver in these locations. 8. Select Include this location in the search. Click Browse. Click the + mark to specify the Ethernet driver location and click OK. 9. Click Next. 10. Click Finish. Unattended Installation DOS driver for unattended installation: For customers who need unattended installation, the DOS driver (E100B.DOS) is included in DOS sub-directory in this package. Unattended installation instructions are also included in PUSH sub-directory. The DOS driver can be used only for this purpose. Determining which version is installed -------------------------------------- (Windows 95/98/Me/NT 4.0/2000/XP) NDIS File Name Version ---- --------- ------- NDIS2: E100b.DOS 4.27 NDIS3: E100b.sys 5.41.27.0 NDIS4: E100bnt.sys 5.41.27.0 NDIS5: E100bnt5.sys 5.41.27.0 NDIS5.1: E100b325.sys 5.41.28.0 DOS ODI: E100BODI.COM 3.59 The following operating systems use one of the listed NDIS device drivers. Windows 95: E100bnt.sys or E100b.sys Windows 98: E100bnt5.sys Windows Me: E100bnt5.sys Windows NT 4.0: E100bnt.sys Windows 2000: E100bnt5.sys Windows XP: E100b325.sys To check the version of the device driver that is installed on your system, follow the following instructions: 1. Right-click the My Computer icon. 2. Click Find. 3. Type one of the NDIS driver names in Named: field. For example, if you are using Windows 2000, type E100bnt5.sys in the field. 4. Click on the Find Now button. 5. It lists the NDIS driver(s). If it does not list the NDIS driver, the Ethernet device driver is not installed in your system. 6. Right-click on the NDIS driver that is found in the Windows folder. 7. Click on the Properties. 8. Click on the Version tab. 9. Click on the Product Version in the Items name: field. DOS NDIS2: 1. Find the file E100b.dos. 2. To determine if a driver update is needed, check the date of the driver file. If the date is older then 04/17/2001, then you need to update your driver. DOS ODI: 1. Find the file E100BODI.COM. 2. Execute it in DOS environment, it shows the following version information. "Intel(R) PRO PCI Adapter v3.59 (010713)" Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * EtherJet is a trademark of IBM Corporation. * Intel is a registered trademark of Intel Corporation. * Windows is a registered trademark of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks, or service marks of others.