Patch 1.10 Patch for ACP Modem equipped ThinkPad 600 and 770 series systems ================================================================ This patch is intended to make the following changes: * Allow a user without Administration priviledges to change the currently selected country for the modem. * Display the supported country list in the Modem Update Reminder application in the same language as the operating system. This patch is intended for limited distribution to IBM customers. It has received only limited testing before release by IBM, therefore it is suggested that any critical data on your hard drive be backed up before applying it. This patch will become obsolete with the next release of ACP Modem software. Patch Scope =========== This patch is intended for ACP Modem version 2.51 running under Windows NT 4.0. The V.90 Upgrade Release 2.516 is also required to be installed on the ThinkPad prior to installing this patch. Patch Contents ============== MWWTT32.DL_ 60,274 bytes 06-01-99 11:41am MWCSW32.EX_ 112,041 bytes 06-01-99 11:41am MWCNAM32.DL_ 24,687 bytes 06-01-99 11:41am Installation Related Files ========================== INSTALL.EXE INSTALL.MSG INSTALL.DAT INSTALL.RSP README.TXT Patch Prerequisites =================== ACP Modem version 2.51 must be loaded on your computer running under Windows NT 4.0. In addition, the V.90 Upgrade Release 2.516 is also required to be installed on the ThinkPad prior to installing this patch. Without the proper V.90 Upgrade installed, this patch will not work. Patch Instructions ================== 1. Click on Start --> Run 2. Type c:\drivers\wnt\acpntfix\install and click on OK. 3. Install will locate all of the modem software, and copy over the necessary file updates. 4. Reboot the system for the patch to take effect. ** END OF FILE **